How to remove the spare tire of the Dongfeng scenery 580 car???? The spare tire is ,,, under the car

First, there are two hidden compartments under the rear box, and there is a small square plastic cover under the grid on the right, buckle open, and the spare tire screws are inside, and then use the barrel screwdriver in the car tool kit to unscrew it down.

2. The tire pressure of ordinary low-pressure tires is between 2 and one "air pressure", while the spare tire is between two "air pressures". The high-pressure spare tire is to ensure the shape, and the second is to reduce the probability of puncture at high speed, but it cannot be used for a long time and at high speed. After changing the spare tire, the owner should find a professional to adjust the tire pressure in time and adjust the air pressure to a safe state (about megapascals).

1. When disassembling the tire to be replaced, first use a socket wrench to loosen the tire fixing screws in turn, tighten the screws in the direction of force, and pay attention to the direction of force when disassembling the fixed wheel screws: the counterclockwise direction is loosened; Tighten in a clockwise direction.

2. After loosening the screws one by one, you can use a jack to partially lift the vehicle. After the jack is propped up, the loosened screws are easily unscrewed in turn, and the tire can be removed as a whole.

3. After the jack is propped up, easily unscrew the loosened screws in turn. Take the tires off.

4. Place the tires under the car and you can replace the spare tire.

5. When installing tires, the screws should be screwed in the order of the diagonal, and the number of turns of each screw should be consistent when screwing, in order to ensure that the screws are evenly stressed.

6. Tighten the screws diagonally in order, after the five screws are screwed, remove the jack to make the vehicle return to the ground, and then tighten each screw according to the same as when disassembling the tire, relying on the strength of the body, also in accordance with the diagonal.

There's a screw on the back door that opens next to the carpet, and you can loosen it with the tool that removes the tire screws, and it's with a sling.

Spare wheel. There are several steps to disassembly:

1. Use a jack.

Jack up the car.

2. Use a socket wrench.

Loosen the tire fixing screws in turn.

3. Shake the jack in a good position, don't let the tire off the ground first, it is not good to remove the tire after leaving the ground, first top a little and then start to loosen the tire screws one by one, only loosen a little bit and don't loosen too much, and then continue to shake the jack until the tire is off the ground.

4. Pay attention to the direction of force when disassembling the fixed wheel screws: the counterclockwise direction is unscrewed; Tighten in a clockwise direction. In addition, since the screws that hold the wheels are tightened, we can rely on the strength of the whole body.

5. After the jack is propped up, the loosened screws are easily unscrewed in turn, and then the tire can be taken off as a whole, which means that the tire disassembly is successfully completed.

Summary. Hello dear!! We'll be happy to answer for you.

How to take the Dongfeng scenery 580 spare tire** is as follows: there is a small round cover in the trunk storage compartment, pry open this small round cover with a tool, and then you can see the bolts inside. Use the sleeve tool provided with the vehicle to rotate the bolt all the way to the left, so that the pylon with the spare tire hanging below will slowly fall off until the spare tire is completely out of the vehicle chassis.

There is a small round lid in the trunk storage compartment, and you can use a tool to pry open this small round cover, and then you can see the bolts inside. Use the sleeve tool equipped with the vehicle to rotate the bolt to the left, so that the pylon with the spare tire will slowly fall off until the spare tire is completely out of the vehicle chassis.

There is a small round lid in the trunk storage compartment, and you can use a tool to pry open this small round cover, and then you can see the bolts inside. Use the sleeve tool equipped with the vehicle to rotate the bolt to the left, so that the pylon with the spare tire will slowly fall off until the spare tire is completely out of the vehicle chassis.

A spare tire is actually an emergency tire, not a tire for long-term use. Regardless of whether the spare tire is wide or narrow, the manufacturer has special requirements for production and use. Because the spare tire is not hung on the car for a long time, there is no auspicious wear, so a tire that is not worn out and the tire that has been worn out is not the same, and the spare tire itself has certain safety hazards when used in the car.

Today's tires are vacuum tires, even if the tire leaks will be very slow to drive to the repair shop, so the spare tire will generally not be used well, and the spare tire is often placed in the trunk, will not be exposed to the wind and sun, so the aging speed is not so fast. Under normal circumstances, there is no need to replace the spare tire with a friend.

There are two hidden compartments under the rear box, and there is a small square plastic cover under the right compartment, which is buckled open, and the spare tire screws are inside, and then unscrewed down with the pure combustion barrel screwdriver in the car tool kit.

A spare tire is actually an emergency tire, not a tire for long-term use. Regardless of whether the spare tire is wide or narrow, the manufacturer has special requirements for production and use. Because the spare tire is not hung on the car for a long time, there is no wear, so a tire without wear and tear is not the same as a virtual tire that has been worn out, and the spare tire itself has certain safety hazards when used in the car.

In the process of use, the user cannot replace the original tire with a spare tire because the car has run for several kilometers. The production time of the spare tire and the original tire is different, and the tire aging, hardening, life and deformation are different, so it is not safe to use it for a long time. The spare tire should be replaced with the original tire in time after emergency use.

Photo by Lu Liting) @2019

Summary. Hello! How to disassemble the Dongfeng 580 automatic transmission 7-seat spare tire is as follows:

1. Hidden spare tire: (1) Open the trunk floor. (2) Unscrew the fixture.

3) Take out the spare tire. 2. Back-mounted spare tire: (1) Open the anti-theft lock.

2) Remove the protective cover after rotation. (3) Use a sleeve or wrench to screw out the set nut. (4) Take out the spare tire.

3. Bottom-mounted spare tire: (1) Remove the dust cover and see a screw. (2) Connect the screw sleeve with the screw mouth.

3) Rotate the screw sleeve counterclockwise, and the spare tire will slowly land under the traction of the steel cable (or iron chain). (4) Pull down the steel cable (or iron chain), and then take out the clip below.

Hello! How to disassemble the Dongfeng 580 automatic transmission 7-seat spare tire is as follows: 1. Hidden spare tire:

1) Lift the trunk floor. (2) Unscrew the fixture. 3) Take out the spare tire.

2. Back-mounted spare tire: (1) Open the anti-theft lock. 2) Remove the protective cover after rotation.

3) Use a socket or gear wrench to unscrew out the set nut. (4) Take out the spare tire. 3. Bottom-mounted spare tire:

1) Remove the dust cover, and you will see a screw. (2) Connect the screw sleeve with the screw mouth. (3) Rotate the screw sleeve counterclockwise, and the spare tire will slowly land under the traction of the lead steel cable (or iron chain).

(4) Pull down the steel cable (or iron chain), and then take out the clip below.

I just don't know where the screws are**?

Dear, you can inspect and repair it according to the method I said.

No screws found.

Dear, pay attention to find it, there are screws around the middle.

The screw in the middle of the spare tire hub can be removed by removing it.

There is a car logo in the middle of the spare tire, and inside is a screw, which you can remove when you remove it.

What I asked was how to take down the spare tire, and what did you answer? _?Be far from the mark.