How does running water fix the float? How to remove the water float

Keep your line tight.

Increases the stability of the hook bait.

Increase the composition of the nest material and increase its dead weight.

1.Now the float of fishing, also called float, fish float, fish float, buoy, etc. When fishing with a hand rod, floating is almost indispensable, and using a sea rod.

Float fishing is also indispensable.

2.Floating, is a Chinese word, pinyin is fu piao, is one of the important fishing gear. It also refers to unsteadyness; Foam. They are from the "Jieshi Chapter".

Wenfu. , "Haitao Collection, Haichang One Night".

3.Purpose: Convey the message that the fish have swallowed the bait:

The float is very responsive, and when the fish touches and swallows the hook, the position of the hook changes, and this change is immediately transmitted to the float through the fishing line. Indicates the location of the bait: In the waters of Guangsu, the float is prominently located on the surface of the water, and the location of the fishing spot is accurately displayed.

4.Triangle Float: The float floats as an equilateral triangle.

When the horizontal undercurrent encounters undercurrent, the water flow can be naturally divided, and the overall structure can truly achieve stable wind and wave resistance. The longitudinal force area of the floating body into the water is small, so the water resistance is smaller, and the action of the weak-mouthed and light-mouthed fish is amplified when eating, and the signal is stronger.

Method 1: Use the big drift and turn up the mesh to fish the high mesh.

Method 2: When the water is turbulent, choose to fish for lead, and use a smaller drift with a larger sinker.

Method 3: Make the strand shorter than 15cm, throw the rod and throw the amount in advance, and add a lead sinker.

If you are fishing in a water area with a large flow of water or in a black pit, use a hand rod to get oxygen.

The principle of the broken tip fishing method is to directly increase the weight of the lead skin and use it as an anchor, and the large line will be straightened after the rod is stabilized horizontally, and the line group can transmit the force to the tip of the rod for the first time when the mouth is fed.

When using the crumping tip fishing method, choose a rod with a relatively soft tone, and use a relatively soft force when lifting the rod, otherwise it is easy to cut the line.

Hello, dear, I am happy to answer for you: how to clear the water float A: pro is as follows:

1. Removing duckweed can be salvaged manually, and the manual salvage speed is fast, but it is more labor-intensive, and the duckweed salvaged can be fed to chickens and ducks, and used as fertilizer for chickens and ducks. First, use a bamboo pole to drive the duckweed to a corner of the pond to fix it, and then salvage it to avoid the duckweed covering a large area on the water surface. 2. Raise some loaches, eels and freshwater fish in the pond, these fish like to eat fresh duckweed, as long as there are more fish, generally speaking, duckweed will rarely flood.

3. Ducks and geese are stocked in the pond, ducks and geese can consume a large amount of duckweed, but we should pay attention to controlling the quantity. Duckweed is a kind of floating aquatic weed, small in size and fast in reproduction, will be completely covered on the water surface, is a natural bait for fish and shrimp. Due to the fast growth rate of duckweed, if it is not managed, it will lead to the rapid reproduction of duckweed, covering a large amount of water surface, which will be harmful to water quality and fish and shrimp growth.

An appropriate amount of duckweed can purify the water quality, but the duckweed is not resistant to high temperature, the temperature is too high, the duckweed will age, and the aging and dead duckweed will block the sunlight if it floats on the water surface, affecting the photosynthesis of algae in the water, resulting in insufficient dissolved oxygen in the water, and at the same time, a large amount of oxygen will be consumed in the process of duckweed decay and decomposition, and the decaying organic matter will also cause pollution of the water body. Therefore, it is necessary to prevent the overbreeding of duckweed and remove the duckweed floating on the water surface in time.

Winter fishing, how to choose and use floats.

Method 1: Drift with the current, this is not to cope with the flowing water, but how to adapt to fishing in the flowing water. In fact, the principle is very simple, very similar to stream fishing.

If the drift is not serious, you can trim a little lead skin, adjust the bait to 10 cm from the bottom, let the fishing rig drift with the current, pay attention to the speed of the fishing rig should not be too fast.

Method 2: No floating, when the water is more serious, the float has become an obstacle, and the waterline will also be tilted when the lead sink is increased, so that this will affect the signal transmission, so the folk still have fishing rigs that do not use floats. It is also completely feasible to remove the float of the fishing rig and increase the weight of the lead sinker, and some anglers also like to use live lead.

Method 3: Change the fishing method, which depends on the drifting situation. This is because in wild fishing, although it is said that there is a lot of blunt fishing, it is usually not too blunt, unless there are too many small fish, or when there is such a situation of drifting.

How to deal with floating water:

Generally speaking, it is possible to solve the problem of floating and drifting in the normal weather when fishing is possible, but if the wind and waves are too strong and the water flows through the fierce fishing group to withstand the weather, there is no need to resist, this kind of weather is not suitable for fishing, and there will be dangers. You can wait until the wind and waves subside before fishing.

1. Fishing blunt. In the environment where the wind and waves are larger and the water current is more rapid, the water potential is to fish blunt to deal with, you can use long legs, long tail, thin body, this knows that the jujube limb has good stability and strong wind resistance, and eats a large amount of lead floating, and at the same time leveling the water fishing 2 mesh, the main fishing blunt to deal with the floating water.

2. Fishing is blunt.

Use large buoyancy drift, heavy gravity, short subline, bottom lead, drift tip slowly into the water when drifting, and then fish 2-4 mesh, the main catch mouth or black drift.

3. Fishing itinerary.

This fishing method does not consider the specific fishing group, you can use the bait fishing, adjust the 3-4 mesh to fish 1-2 mesh, throw the hook bait to the top of the fishing point, drift to the bottom with the current, let the fishing group go fishing within the range of the world, mainly to see the acceleration of the top after the float into the water and stand up or the drift reaction such as the black rock key drift to determine whether the fish eat the hook.

4. Catch and run lead.

Still use the fishing rig with a large blunt angle, but use a macaroni sinker instead of a lead seat, and then use a space bean to fix the macaroni sinker and then link the figure-eight ring, at this time loosen the center of the sinker to adjust the distance and float the same length of the target. The same drift tip slowly enters the water to fish for 2-4 mesh, and the drift reaction of this fishing group when the fish eats the hook is black drifting, and the main grasp is solid.

Hello dear, I have helped you to check the results, water floating refers to all kinds of debris and garbage floating on the water surface, including leaves, plastic bags, paper scraps, etc. The method of removing the water float is as follows:1

Hand cleanup: Use a long-handled net to pick up trash and debris floating on the water. 2.

Mechanical cleaning: Using professional cleaning equipment, such as water surface cleaning machine, water surface sewage suction machine, etc., can quickly and efficiently clean the water float. 3.

Preventive measures: Strengthen the management of the surrounding environment of water bodies, reduce garbage and debris into water bodies, such as setting up garbage cans, strengthening publicity and education, etc. No matter which method is used, it is necessary to pay attention to safety to avoid secondary pollution or other accidents caused by the number of yards caused by cleaning up the water float.

Hope mine is helpful to you<>

The plumb sinker touched the bottom and floated, and the space beans on the plumb sinker were rolled up for ten centimeters. That is, the traditional fishing method generally used, running water drifting, that is, fishing slippery lead. You can't make a nest when fishing water, so you can cast the rod frequently.

When using rubbing bait, you need to make sure that there is silt, rotten branches and leaves at the bottom of the water, otherwise it is better to pull the bait.

The selection of fishing positions in flowing water areas should avoid areas with turbulent currents, but choose places where the water flow is relatively slow, usually choosing the backwater bay, under the dam, and next to the bridge. This kind of place is not only a slow current, but also a place where food accumulates, and it is a very good place to fish in the pan. There are also some obstacles in the flowing water, which are hooked behind the obstacles, which are also where the fish hide.

How to adjust the flow of water and not drift the method is as follows:

Adjust the low eye and high fishing: adjust the low eye, the fishing target is high, and the float can be fixed near the den in the flowing water. For example, you can adjust 2 mesh to fish 3 mesh, and level water to fish 2 mesh.

Catch Lead: Release the two space beans above the lead seat to allow the float to move freely, then level the water and fish for 2 meshes.

Fishing double lead: Prepare two lead seats, each fixed with space beans, with lead drifting, the number of meshes is higher, 4-6 meshes, 2-4 meshes, and bait fishing.

How to deal with running water

1. When choosing a fishing position, observe the position of obstacles in the water, such as near large rocks, the water flow is relatively slow, and you can fish nearby.

2. The shape of the fish float is also more important, and it is necessary to use a long tail float, which can also be well maintained when the water flow speed is fast. At the same time, the amount of lead eaten should be larger, for example, 1 gram of lead should be used in still water, and 2 grams of lead should be used in running water.

3. After choosing a fish float with a large amount of lead, you have to match it with a heavier lead sinker, such as a 20 to 30 grams macaroni olive lead sinker.

Methods and techniques of drifting: blunt fishing, blunt fishing, fishing runaway lead, double lead fishing, and fishing rod slightly.

1. Adjust the blunt fishing, the so-called blunt fishing, that is, adjust the low eye fishing high, in the water area of slight water, can make the float fixed in the den, so as to avoid the current to wash away the bait.

If you adjust your fishing normally when you walk slightly, you can be more flexible, and the current will swim slowly with a float. In the case of blunt fishing, the double hook lies on the bottom, which can fix the float so that the float will not flow with the current. For example:

Adjust the drift with the hook, adjust the 2 mesh fishing 2-3 mesh, let the 2 hooks lie completely on the bottom, hide the side or level the water with the hook to fish 2 mesh.

It can also be said that as long as the eye is lowered and the eye is high, it can be called blunt fishing, and it can cope with a slight stove or water.

Second, fishing and running lead, fishing and running lead can also be called fishing slip lead, that is to say, the lead skin can be sliding, loosen the 2 space beans above the lead seat, and let the lead skin slide on the main line.