How to deal with the network timeout display 1 1

Based on the information provided, if a broadband fault occurs, you can troubleshoot the problem by using the following methods:

1 Use stand-alone dial-up, if you are using a router, please temporarily disconnect the router for testing;

2 Restart the modem and the computer;

3 Re-create the broadband dial-up connection and try to dial again. How to do it: Start the Program Attachment Communication New Connection Wizard.

If the self-troubleshooting still does not recover, you can contact human customer service to report the fault, and we will deal with it for you as soon as possible.

The possible reasons for the network connection timeout are as follows:

1. The network is disconnected, but it often shows that it cannot be connected.

2. The network is blocked, so you can't get the reply packet within the default waiting time of the program.

3. The network is unstable, and the network cannot fully transmit the server information.

4. System problems, the system resources are too low, and the program cannot provide enough resources to process the server information.

5. The device is unstable, such as loose network cables, unplugged interfaces, etc.

6. The system is busy and cannot respond when registering online.

The mobile data network is unstable, so it is recommended that you try it as follows:

1. If conditions permit, please compare whether there is this problem with other models, if there is also a signal coverage that may be poor for the local network operator;

2. Replace the SIM card and eliminate the SIM card failure;

3. In places with more concentration, it will lead to congestion in the use of data networks, and the use environment can be replaced;

4. There is a certain strong magnetic field interference in the local area, which will affect the signal, please change the use position to observe;

If the problem still exists, please bring the purchase invoice, warranty card and machine to the OPPO customer service center for testing, and professional engineers will solve it for you.

If your mobile phone cannot access the Internet normally, please check the following conditions:

1. If you don't restart your phone after upgrading to 4G**, you won't be able to use the Internet function normally;

2. Confirm whether there is a network, it is recommended that you can use it in a place with a strong signal;

3. Check whether there is still a phone bill in the account, if the balance is insufficient, you need to recharge before you can use it;

4. After 3-5 minutes of power off, restart the phone and try again;

5. Check whether the USIM card is inserted, if it has been inserted but still cannot be used, it is recommended that you go to the business hall to check whether the USIM card is faulty, or replace the card for testing;

Hello, the timeout is mainly due to the inability to connect to the network for a long time. [smile]3. The QQ network timeout caused by network delay, you can turn on the airplane mode of the mobile phone, turn it off after five seconds, and then reconnect to the network or restart the mobile phone.

5. The signal in the place is not good and can not be connected to the network, you can change the place and then connect 6, the above is the solution of data network connection, but if it is connected to a wireless network, then you need to check whether the mobile phone wifi password input and the wireless router Internet settings are correct, whether other devices can access the Internet through wifi, it is recommended to delete the wifi password of the mobile phone and re-enter it again, or restart and re-set the wireless router.

1) If it is a problem with the broadband itself, first directly connect the broadband network cable to test, if it is a broadband problem, contact the broadband customer service to solve it.

2) If it's a problem with the router, if it can be used originally, you can't use the land backup for the time being, my own practice is to disconnect the power of the router and plug it in, and I'll take a look. If you don't know what you know, you can restore the factory settings, and you can use it from the new settings (this is under the premise of the correct physical connection, sometimes it is caused by the slow or failed IP address finding of the router, not that the router is broken).

If it can't be solved all the time, it is recommended to call the customer service of the router, they have **** guidance, I encounter a problem that I can't solve by myself, it is very useful to consult the advice they gave, and they will give the correct advice for your settings or operations.

3) If you turn off the wireless switch, it's on, if it's a wireless connection with software, it's normal for the software to be bad and often have problems, there is no better way, use the router to know it. In addition, it is caused by the network card driver is not or is not suitable, and whether there is a problem with the network cable interface or network cable.

4) If it is caused by a system problem, it is recommended to restore the system or reinstall it.

win7810 restore the system, right-click on the computer to select attributes, select system protection on the right side, system restoration, follow the steps to do it, if there is a restore software, you can also use the software to restore the system.

Network timeouts are usually caused by slow network speeds, or they can be caused by a faulty network connection. If the opening of the web page times out, it may also be a problem with the server.

If you confirm that your network and internet speed are normal, it should be that there is a problem with the other party's server.

This prompt appears when you cannot connect to the server for more than a certain period of time, usually when the server is busy or the local signal is poor.

If the signal in the place where you are located is not good, or the mobile phone Internet access point is set incorrectly, if it does not work to reboot, check the access point settings.

If your mobile phone cannot access the Internet normally, please check the following conditions:

1. If you don't restart your phone after upgrading to 4G**, you won't be able to use the Internet function normally;

2. Confirm whether there is a network, it is recommended that you can use it in a place with a strong signal;

3. Check whether there is still a phone bill in the account, if the balance is insufficient, you need to recharge before you can use it;

4. After 3-5 minutes of power off, restart the phone and try again;

5. Check whether the USIM card is inserted, if it has been inserted but still cannot be used, it is recommended that you go to the business hall to check whether the USIM card is faulty, or replace the card for testing;

6. If the traffic usage reaches the maximum value in the current month, the network will be automatically closed, it is recommended that you pay attention to our SMS reminder or inquire about the **product description.

Samsung phones generally recommend the following steps to troubleshoot and deal with them:

1.Check whether the mobile network connection is stable, and it is recommended to try to change the wireless network.

2.An update software version attempt.

4.Back up your data (contacts, text messages, **, etc.), factory reset and reinstall attempt5Update the system version of your phone.

Network connection timeout means that the server does not respond within the program's default waiting time, and there are many reasons for network connection timeouts.

1. The network is disconnected, but it often shows that it cannot be connected.

2. The network is blocked, so you can't get the reply packet within the default waiting time of the program3. The network is unstable, and the network cannot transmit the server information completely.

4. System: The system resources are too low to provide sufficient resources for the program to process the server information.

1. First, make sure that the router is set up correctly.

1. The problem of setting the IP address of the computer.

1) When connecting to the router to surf the Internet, you need to set the IP address on the computer to be automatically obtained (dynamic IP).

Dynamic IP address configuration of the computer.

2) If the administrator of your network requires a fixed IP address to access the Internet, please fill in the correct IP address, subnet mask, gateway and DNS server address in the local connection.

2. Check whether the network is normal.

1. First of all, open PC Manager and select the toolbox in the lower right corner.

2. Select the network repair tool.

3. Click Fix Now.