The wireless router connection is normal, but there is no data signal for Internet broadband! Why?

If the settings are incorrect, connect the computer network card with the LAN port of the router with a network cable, and turn on the power of the router; Double-click the IE browser on the computer, enter the IP address of the router default settings page in the address bar, and press Enter; Enter the default username: admin, and the default password:

admin；Click OK. Click Setup Wizard in the left rail, click Next; Click on ADSL Virtual Dialing (PPPoE) and click Next; Enter the broadband, password, and click Next; Click Done. Many friends think that the dial-up connection is over after setting up, but in fact, there is still one point that is not completed.

Because the following settings are not completed, many friends fail to dial up, or can connect to the network, but it will be dropped after a short time. Let's continue the settings: click the MAC address clone menu in the network parameters menu on the left sidebar, click Clone MAC address in the interface that appears, and click Save.

At this point, the router will prompt you to restart the router, click OK to restart the router. After the router restarts, close the Internet Explorer. Connect the WAN port of the router with an incoming network cable, and then connect the computer to the LAN port of the router with a network cable to start surfing the Internet.

The router is to be set up and passwordd.

1. Open the settings menu of your phone directly and click WLAN to jump.

3. If it's okay, click the icon button.

4. At this time, continue to change DHCP to static.

5. After completing the above operations, make sure to select Save.

6. In this way, the corresponding results will be obtained, and the requirements can be realized.

What happens when wifi shows connected (not available) and what should I do if I want to go online?

1. First open your phone and tap Settings;

2. Then click Wireless & Network;

3. After that, click WLAN;

4. Then press and hold the connected wireless network;

5. In the pop-up interface, click Modify Network;

6. After that, click on the checkbox that says advanced options;

7. Then we click on IP;

8. In the pop-up interface, click the DHCP option button;

9. After the selection is completed, click Save, and then you can go online.

1. Internet settings on the wireless router.

Please go to your wireless router settings interface, and check the "WAN port status" information under the "System Status" (on some routers: Running Status) optionIf all the following parameters are 0

The following parameters in the WAN port status are all 0, indicating that there is no connection between the wireless router and the broadband operator, so the wifi signal of the mobile phone connected to the router will naturally not be able to access the Internet.

2. The impact of "Internet control".

If the user turns on the "Internet access control" function on the wireless router, but due to the unreasonable setting of Internet access control rules, it will also lead to the situation that the mobile phone is connected to WiFi but cannot access the Internet.

Workaround: Turn off the Internet Control feature.

Part 3: The impact of "wireless MAC address filtering".

The "wireless MAC address filtering" function is mainly used to restrict the Internet access of wireless devices, and if the settings are not reasonable, it will also make you unable to access the Internet.

Fourth, the impact of "parental control".

Parental Control" is the same as "Internet Control" and "Wireless MAC Address Filtering" functions, which are used to control and restrict the Internet access of the device. Generally, these functions are not recommended to be enabled, because if the settings are incorrect, your device will not be able to access the Internet.

Workaround: Turn off Parental Controls.

The wifi signal at home is obviously full, but there is no Internet access, so the problem is here.

Restart your router and try it. If that doesn't work, check whether the network cable to the router interface is plugged in firmly.

There is a problem with the path setting of your router, it is a false signal, you can ask someone who understands the computer to help you reset the IP address according to the router you need.

Check to see if it's restricted, if so, then you need to change the configuration, and then see if the wireless card is disabled.

Is the network cable of the router connected by the optical connection plugged in?

If the network is not good, you can't get on your computer, not only on your mobile phone.

There's a power outage, or the router is broken.

It's on the outside.,Fake signal.,You can use it to open a mobile wifl payment.。

It is very likely that there is no cost for broadband.

If you have been using it for a period of time and suddenly it can't be used, it means that the router is broken.

Summary. Hello, wifi signal regardless of whether there is a network mobile phone and other equipment can be connected, the user can not use the network after connecting to wifi, first confirm whether your broadband line is smooth, you can check whether the indicator light of the broadband cat has LOS red light flashing, if there is a broadband failure, so the router's wifi can not use the network, at this time, the user can call the operator's customer service to report the fault processing, after the fault report, there will be staff to come to the door to troubleshoot.

If the broadband modem can be connected to the network normally, then it is a problem with the router, and you can check whether the network cable is connected correctly. If the network cable between the broadband modem and the router is normal, you can restore the router to its factory value, and then reset the router parameters to see if it can be restored to normal

What happens if the Wi-Fi is connected and the signal is normal, but I can't access the Internet?

Hello, wifi signal regardless of whether there is a network mobile phone and other equipment can be connected, the user can not use the network after connecting to wifi, first confirm whether your broadband line is smooth, you can check whether the indicator light of the broadband cat has LOS red light flashing, if there is a broadband failure, so the router's wifi can not use the network, at this time, the user can call the operator's customer service to report the fault processing, after the fault report, there will be staff to come to the door to troubleshoot. If the broadband modem can be connected to the network normally, then it is a problem with the router, and you can check whether the network cable is connected correctly. If the network cable between the broadband modem and the router is normal, you can restore the router to its factory value, and then reset the router parameters to see if it can be restored to normal

1. First connect the router to the broadband modem computer 2, and then open the browser and enter the management address and login password of the router. 3. After logging in to the background, click the setup wizard, and then fill in the corresponding parameters according to the wizard instructions. 4. Select the networking mode is generally pppoe, and then click Next to enter the broadband account and password, and click Next:

5. After the broadband parameters are set, enter the wireless setting interface, fill in a wireless name and password6. After the wireless settings are completed, click Save, and then restart the router to use it normally.

Many reasons:

Connecting the signal is equivalent to plugging the network cable into the switch. It's not certain whether you can go online or not.

1.The other party's wireless signal is only used internally and is not connected to the external network.

2.If DHCP is enabled, you cannot get the correct IP address.

3.The whitelist is enabled for the other route, and illegal access to the network cannot be passed.

4.The other party has made a restriction on the Mac.

5.Problems with your own network card settings.

The problem of my own piece is very small, it is usually the other party's problem, and now I know that there are too many people who rub the net, and it is normal to make restrictions.

This requires you to log in to the router to set up the Internet, first log in to this IP address, please refer to the router manual for specific operations, the first login username and password are admin, and you can access the Internet after entering your broadband account and password.

Set your computer's IP to be obtained automatically. All changed to automatic.

The mobile phone wifi signal is very good, but there is no Internet access, a few simple steps to find out the network problem.

Log in with your username and password first.

There are several reasons why you can't connect to the internet when you connect to wifi

The wifi itself is a problem, maybe the wifi is not connected normally, resulting in the inability to access the Internet.

Router problems, which can be overheating or damaged.

The broadband bill may be in arrears, resulting in the inability to access the Internet.

The wifi name contains Chinese, which makes some computers unable to connect to the Internet.

Computer system problems, there may be a problem with the system, resulting in a connection to wifi but unable to access the Internet.

Specific solutions to computer system problems:

Open the "Run" dialog box (or press Win+R) and enter the command "cmd" to enter the MSDOS interface.

Enter the ipconfig all command on the msdos page to view the local gateway and DNS information on the displayed result page.

Open Control Panel, double-click Network Connections, then right-click Local Connections, and select Properties.

Select Manually set DNS to set DNS for the current connection. After the settings are completed, check whether the Internet can be accessed normally.

What does it mean to be connected to the Internet but cannot access the Internet, and what is the matter with the mobile phone wifi has been connected but cannot access the Internet.

Enter the IE address and then enter the account password (the default seems to be admin, please check the manual) to log in to the router background management, and then set the Internet access mode PPPOE Then enter your broadband account password and then OK. Then you have to set up a wireless network Add a name to the wireless network (the default is the router name) Encryption method, if you don't understand, choose no encryption, and finally restart the router. Relink the wireless network, and then check the wireless network connection status, whether the IP address and DNS in it are all successfully obtained, and if the acquisition is successful, it will definitely be able to link to the network.

If there is a signal that cannot be used, then it means that your router is good, and there is a problem with the network cable line and router settings, and you can find the problem and solve it one by one.

It may be a router problem, or it may be a network problem, you can restart the router to try, if it still doesn't work, you can contact the telecommunications company.

There are many reasons, it may be that the broadband has expired, or it may be that there is a problem with the terminal or line, you find a broadband maintenance personnel to come and see, if there is no problem, the wireless router is broken, and it should be good to replace one.

There is a signal from the wireless network