22 floors What is the elevator load

The rated speed is meters and seconds, the rated load is 1000 kg, 10kw 13kw (with permanent magnet traction machine, see the brand kw 18kw (with turbo worm traction machine, see the brand specifically).

There are several types of elevator load operation tests:

1.Test the balance factor This is used to see the difference in the weight of your car with the weight of the counterweight. The national standard for this indicator is 40-50%. This one has to do with energy saving. Of course, the deviation is too large, and the elevator can't move.

2.Leveling test under no-load, half-load, and full load conditions This is used to see the difference between the position of the elevator and the floor in the case of leveling.

3.Elevator emergency stop test under load is whether the brake can effectively stop the elevator and the stop distance in the case of elevator emergency stop.

4.Safety gear, speed limiter experiment In the case of the elevator speed out of control, the elevator gate can be placed on the guide rail through the above-mentioned safety components.

Wait. There is a limited amount of space in this, and there are many things that cannot be written.

If you fill in the form, you will fill it out by yourself, which is considered a self-inspection, and then the ** person will accept it. If the relationship is good, you fill it out for him, and he will finally stamp and sign it.

The internal inspection of large enterprises is far stricter than the acceptance of the first enterprise.

It can only be said that according to the standard configuration: rated speed meters and seconds, rated load 1000 kg, 10kw 13kw (with permanent magnet traction machine, see the brand kw 18kw (with turbine worm traction machine, see the brand specifically).

Generally, this floor (which should be almost 100m) should be a high-speed elevator, and it will be reached after Zen is completed. Also see what the load is? If you call 1t early, it is different. Around 18-24kw power distribution is appropriate.

At 40%-50% load, an elevator is a vertical lift powered by an electric motor with box-like pods for multi-storey buildings to carry people or goods. There is also a stepped type, and the tread plate is mounted on the track for continuous operation, commonly known as escalator or moving walk. Stationary lifting equipment serving the specified floors.

A vertical lift has a car that runs between at least two rows of rigid rails that are vertical or have an inclination angle of less than 15°. The size and structure of the car are convenient for passengers to enter and exit or load and unload goods. It is customary to use elevators as a general term for vertical transportation within a building, regardless of the mode of drive.

According to the speed, it can be divided into low-speed elevator (less than 1 meter second), fast elevator (1 2 meters second) and high-speed elevator (more than 2 meters second). Hydraulic elevators began to appear in the mid-19th century, and they are still used on low-rise buildings today. In 1852, Otis of the United States developed a safety elevator for wire rope lifting.

In the 80s, the drive device was further improved, such as the electric motor driving the winding drum through worm drive, the use of counterweight, etc. At the end of the 19th century, friction wheel transmission was adopted, which greatly increased the lifting height of the elevator.

I'm so annoyed right now!! Don't post something so boring next time!!

1. This is not easy to calculate, it depends on the manufacturer and the model of the elevator, etc., even if the same manufacturer has different models of elevators, the attack rate is different. The main reason is the difference in the model of the host, and the difference in the control equipment.

2. It is similar to the general motor, but it is not divided into two lines, and one power line is mainly to control the operation of the elevator; One is the lighting line, which mainly controls the lighting of the car and the hoistway.

The elevator should be calculated according to the load for different purposes, the relevant parameters should be carefully selected when calculating, and the conductor area and the rated current of the distribution switch should be selected according to the results, especially when the total load calculation of the transformer capacity is selected, the demand coefficient of the elevator should not be selected too large, so as not to cause unnecessary waste.

The load of the elevator is related to the selection of the car, such as the load of about 28kw per ton, and there are different manufacturers and different models.

1. The power of the elevator is generally approved according to the load capacity.

The power of an elevator with a load of 800 kg is about 11 kilowatts, and the power of an elevator with a load of 1000 kg is about 13 kilowatts.

Elevator ** and load capacity, ladder speed and car decoration requirements, ordinary standard 800kg elevator, ladder speed, drive power 9kw.

2. Take Blu-ray host WYT-S as an example:

Depending on the brand and model of the host, the rating of the host is also different. It is not possible to generalize.

The power of the home elevator is generally 1kw, Hangzhou Odsen elevator.

Hang the meter, the elevator power is not the same, not every time is the standard power. The load capacity (number of people) is also different, and it is not guaranteed that it will be 13 people carrying 1000 kg each time. The number of times a day is not necessarily used.

Roughly calculated, one kilowatt of electrical appliances is one kilowatt of electricity per hour. Roughly calculate the total time of elevator work every day (converted by the number of times, the elevator speed is certain), all according to the full load calculation (1000kg) can roughly calculate the electricity consumption, but for reference only.