Can the signal be enhanced after wireless bridging of wireless routers

Wireless router bridging.

The signal can be boosted because the wireless range is extended.

Setup method: Main router settings

1. Enter the settings interface of the main router, and then click [Running Status] in the left option bar, and you can find the DNS server in the WAN port status bar.

There are two in total, the primary DNS and the alternate DNS server, which are recorded.

2. Click [Network Parameters] - LAN Port Settings] to set the LAN address of the router to save, at this time, it will be restarted and then return to the settings interface and click [Wireless Settings] - Basic Settings.

3. Set the SSID to TP Link A. Set up a wireless channel.

For: 11. Note: The WDS or Bridge feature must be turned off.

4. Click [Wireless Settings] - Wireless Security Settings, and select WPA-PSK as the encryption method, in this example, 12345678 as an example. Note: WPA WPA2 encryption is more secure and more stable to bridge than the old WE encryption, so WPA WPA2 encryption is recommended.

5. Click [DHCP Server.]

-dhc server settings, set [Address Pool Start Address] to; Set the End Address of Address Pool to .

Click Save to restart the primary router. The main router is set up.

Set up the secondary router].

1. Enter the settings interface of the secondary router.

2. Click [Network Parameters] --LAN Port Settings.

3. Set the LAN address of the secondary router to prevent conflicts with the main router, and it is also convenient to manage the main and secondary routers.

4. Click [Wireless Settings] - Basic Settings.

5. Set the SSID to TP Link-B. Set the wireless channel to: 11.

6. Check [Turn on WDS], click Scan in the pop-up interface, find the SSID of the main router after getting the AP list, that is, TP Link A, click the [Connect] button on the right, select WPA-PSK as the encryption method, fill in the key of the main route: 12345678, (keep it consistent with the main router), and click Save.

7. Because the new WDS function is different from the old bridge and more advanced, you only need to turn on WDS on all secondary routers and fill in the information of the main router, if the main router turns on the WDS or bridge function, please turn it off, otherwise the WDS function cannot be used.

8. Click [Wireless Settings] - Wireless Security Settings

Here you set the password for the secondary route wireless.

9. Click [DHCP Server] -- DHCP Server Settings], change [Address Pool Start Address] to [Address Pool Start Address] to [Address Pool Start Address]. Gateway: Enter the IP address of the primary router.

Namely. The primary and alternate DNS servers fill in the previously recorded addresses to save and reboot the router.

10. The setting is complete and the connection is successful.

Home router bridging method, which can enhance wall penetration and signal after setting.

Summary. The pro-bridging signal is good.

The reasons why bridging signals are good are as follows:

1. Wireless network relay, the wireless signal received by the repeater is amplified and gained, and then transmitted to achieve the purpose of increasing the coverage of the wireless network signal.

2. Router bridging is to convert the wired network signal of the front router into a wireless signal through the bridging router, so as to increase the wireless signal, regardless of range or signal strength, it is larger;

3. Generally speaking, router bridging and relaying, router bridging is better.

It is better to bridge with two routers, or it is better to expand the signal, and that network is faster.

Hello, I'm your digital consultant and I'm sorting out the answers for you, please wait.

The pro-bridging signal is good. The reasons for bridging the signal are as follows: 1. Wireless network relay, the wireless signal received by the repeater is amplified and gained, and then transmitted to achieve the purpose of increasing the coverage of the wireless network signal. 2. Router bridging is to convert the wired network signal of the front router into a wireless signal through the bridging router, so as to increase the wireless signal, regardless of range or signal strength, it is larger; 3. Generally speaking, router bridging and relaying, router bridging is better.

I hope my answer is helpful to you.

If you are satisfied with me, please give a thumbs up to the precious gold finger Thank you.

Use a Tuoshi N815 wireless network card to plug in the computer to search for wifi signals, if you don't want to plug in the computer, you can buy a Tuoshi TS658 card router to receive wifi and then **wifi mobile phone and so on.

Use a router with a relay function to amplify the signal relay, I have used Tengda W308R, the method can be Qi Zhaoxing.

It's not okay to increase the antenna, the best thing to rent is to buy an AP, our company also uses this to make the whole office wireless.

However, the power of the household is not as great as that of the branch, and it should be noted that even if it can be achieved, the radiation is quite amazing!

Here's how to boost the signal of a wireless router:

1.The easiest way to do this is to reboot, and many issues can be resolved after a reboot.

2.It's also a good idea to update the version of your router, and the updated software will keep it in tip-top shape.

3.The router may have a default channel, and when there are too many people using the channel, it will become congested and the network will get stuck, so change the channel in the router settings and switch to a channel that is not crowded.

4.The best place to place the router is in the middle of the house, not in the cat's place.

5.Most wireless routers use a built-in antenna design, but there is an option to upgrade the antenna of the wireless router to improve the quality of the network.

6.When your device and computer are too far away from your router, it can be difficult to connect to your home network. At this point, the problem of buying a repeater is solved.

7.Aluminum in beer cans, beer cans, and soda cans can can be used to reflect and extend the router's signal.

Here's how to strengthen your wireless router's signal:

1. Expand the collapse of the antenna to enhance the signal. Since the size of the antenna gain directly affects the transmission strength and reception ability of the signal, replacing a high-gain antenna with a wireless router can directly enhance the signal;

2. Modify the signal channel and wireless channel to reduce interference. Modify the wireless channel to avoid duplication with other channels. In addition, household appliances will also cause electromagnetic interference to the wireless network when working, so the wireless router should be kept as far away as possible from the working household appliances;

3. Position the wireless router reasonably. Since the wireless signal is greatly attenuated after crossing obstacles, especially through metal. Most modern buildings are made of reinforced concrete, so when placing wireless routers, the signal should be as little as possible to pass through the wall.

If you want the two routers to connect and the signal becomes stronger, you can bridge the two WiFi routers or connect them in series to enhance the WiFi signal coverage.

1. Bridge: The IP addresses (that is, management IPs) of the two routers should be in the same network segment and not the same, if route A is, then route B is set to, and the IP addresses must not conflict; Set the channels (frequency bands) of the two routes to the same, preferably 6 or 9; Router A does not need to enable the WDS (i.e. Bridge) bridging function, route B needs to be enabled, and click Scan to fill in the key type and key of route A. DHCP must be enabled for route A, and DHCP must be disabled for route B. Finally, restart route B.

2. Cascade: Put a network cable from router i to router ii, router i is connected to lan port, router ii is connected to wan port; The management IP addresses of the two routers cannot be on the same network segment. If Router I is, then Router II is changed to; Router I turns on the DHCP service, and the WAN port of Router II is set to automatically obtain IP addresses. Restart Route II.