How to make a silhouette effect with PS

Open **, click the pen tool in the toolbar, and cut out the path of the item that needs to be made as a silhouette.

2.Buckle slowly until all paths are finished.

3.Press the keyboard Ctrl and Enter keys at the same time (to bring up the selection).

4.Change the foreground color of the color picker to black.

5.Click on the menu bar, select Fill, OK.

6.A rough silhouette has been made.

First, move the mouse over the background layer, click the left button, and pull to the lower right corner to copy the original background. (ps,We don't recommend operating on the original map,The second thing you need to pay attention to is,Add a new layer for each step of the operation,The following is no longer reminded,This is mainly to facilitate later modifications,When you are not satisfied with which part,You can only modify this part,And do not move to other parts)

The second and most critical step is the most crucial step. Click on Image - Adjust - Threshold. At this point, the color ** instantly becomes an image formed by two pixels, black and white.

Here popularize the concept of threshold: the threshold is the critical value, the threshold in PS, is actually based on a black and white cut-off value of **brightness, the default value is 50% neutral gray, that is, 128, brightness higher than 128 (< 50% gray) will turn white, less than 128 (> 50% gray) will become black (can be retained with other high contrast in the filter, and then the threshold effect will be better).

Using an eraser handle, remove the whole house. In the eraser's interface, you can set the size of the eraser and how hard or soft it is. Because here you need to wipe the whole house away, you can choose the hardest.

In addition to the branches, how to remove the other white parts? Like magic, let's use the magic wand, click once, and instantly all the blank parts are selected, and then press "Delete". The background becomes a gray and white checkered background, which is the most original background color of PS default.

At this time, only the silhouette of the tree branch is left in the original image. It's time to add a nice background to it. Using the gradient tool, add a color, here you choose the color of the type dusk, of course, whatever you like.

Then select the center gradient and pull a gradient line from the center outward, so that there is a kind of smudging rush.

Because, you're making a gradient on a new layer, and at first you will notice that the branches are covered, so don't panic, just move the gradient layer under the branch layer.

Because of the rise of short-term ** now, any enterprise, any studio or individual needs to edit a large number of ** to package the brand, send Douyin, send Moments, send ** and other self-** channels to display. Because new content is updated and released every day, there are not enough editors to recruit at all, and the imbalance between supply and demand has caused editors to have high salaries (whether they are looking for a job or taking private orders at home, the monthly income is easily over 10,000, and 20,000 or 30,000 yuan is not uncommon.) [Recommend a free "short** clip post" study **]:

And the editing technology does not require superb computer technology, nor does it require artistic attainments, it is basically a fixed routine, what style of film you want, what rhythm you want, you can easily master it after three or four months of training. But if you have a little computer foundation, you can drag with the mouse, click on the icon, and save, unless you don't want to learn, you can't learn it. However, if you want to learn well and have relatively weak self-control ability, it is recommended to go to a better training institution, and the strength and scale of the top few institutions in China recommend Wang's Education.

In the ** clip, [Wang's Education] is the boss in China, and each city is a chain campus directly operated by the headquarters. Different from many other large institutions of the same type: each campus of Wang's Education is physically face-to-face, the teacher is hand-in-hand, and there is a special class teacher from morning to night, and the liver-bursting learning mode will improve quickly, especially suitable for students with zero foundation.

To make a starry sky silhouette effect, first cut out the character, move it to the starry sky**, adjust the size and position, and adjust the color of the character, and the effect is complete.

How to make a silhouette on the Meitu App:

1First of all, open the Meitu App and select the blank one you want to make into a silhouette**.

2. Click Beautify - Cutout Pen - After cutting out the entire outline of the character, adjust the feather value of the cutout part to 0. Save as custom footage or png format** for later use.

3Open the png** that I just cut out, and now the whole picture is only the deducted part, which adjusts the brightness and contrast to 0.

4 Then click - Basic - Contrast 100%. Repeat three times.

5. Change the background to open a picture of your favorite landscape.

6 Then right-click with great caution - insert a ** - insert the png you just processed.

7. Adjust the position.

Preparation tools Materials: A computer with Windows 10, Photoshop CC (Creative Cloud) software.

1. Open Photoshop**.

2. After opening, tap the Magic Wand tool in the left toolbar. Brotherhood <>

3. After clicking the Magic Wand tool, load the characters into the selection area, and hold down the shift key to select them again.

4. After loading the characters into the selection, press the Ctrl key to find the characters.

5. After selecting the characters, fill in the envy of the withered orange and write a black one, and the silhouette effect is completed.

1.How can you process a ** into a silhouette.

1. First of all, launch Photoshop CS5 and open a character material**.

2. Duplicate the layer, then select the quick selection tool to cut out the character, and create a new layer, hide other layers to see the cutout effect.

3. Unhide the layer, and when selected, create a hue saturation adjustment layer, and set the brightness to -100

4. Then create a color balance adjustment layer, check the middle value, and set yellow to blue to -80

5. Check the shade and set cyan to red to 60, yang red to green to 20, yellow to blue to -90

6. Select Layer 1, execute the Image-Adjust-Curve command, adjust the curve value, and then execute the File-Save as command, and save it.

7. Complete the renderings.

2.How to make an image a "silhouette" effect in Photoshop?

Author: Photoshop CS, other versions have similar steps.

Production process: 1. Open a picture of a character in Photoshop, preferably with moving curves and fashionable postures. Select the "Pen Tool" in the toolbox and add a selection to the person, and remove the background 2. Create a new file, set the foreground color to black and the background color to white, and select the "Filter", "Render" and "Cloud" commands in the menu bar to make the background layer into a cloud effect 3. Select the "Filter", "Render", and "Layered Clouds" command in the menu bar, and then press Ctrl+F for n times 4. Select the "Filter", "Distortion", and "Ocean Ripple Annihilation" commands in the menu bar. Open the Ocean Ripple dialog box, set the ripple size to 12 and the ripple amplitude to 14, click the OK button 5, click the New Fill Adjustment Layer button in the layer panel, select "Hue Saturation" in the pop-up command, open the Hue Saturation dialog box, select the "Color" option, set the hue to 330, the saturation to 65, and the brightness to 0, click OK, and the image will turn red 6. Select the "Move Tool" in the toolbox to move the character to the file to get Layer 1, press Ctrl+T key to open the free transform adjustment box, adjust the size and angle of **, and press Enter to confirm.

Ctrl-click on Layer 1 to load the character's selection, fill the character in black, and press Ctrl+D to deselect the character. 7. Select the "Filter", "Blur" and "Gaussian Blur" commands in the menu bar to open the Gaussian Blur dialog box, set the radius to 10, and click OK.

PS The way to do the silhouette effect is:

1. Open the PS software and paste the ** you need to make a silhouette in.

2. Copy a layer (generally PS usually copies a layer, and the original picture will be searched and stored as the base map). Remove color from copied layers: image, adjust, color, or directly use the shortcut key shift+ctrl+u.

3. Here, if the black and white contrast is not obvious, you can adjust the contrast: image, adjustment, brightness or contrast, or use the shortcut key C. If the contrast is noticeable, this step can be omitted.

4. In the pop-up contrast box, increase the contrast value until you need it.

5. Threshold processing of layers: images, adjustments, and thresholds.

6. In the pop-up threshold box, adjust the position of the triangle until it fits.

7. The silhouette made in PS can be dragged directly into AI with the lead tool, and you can use image tracing, sketch artwork, and get a vector silhouette with a car width.

The following introduces the method of using PS software to make a silhouette effect, I hope this guide can help you.

Then drag another character** into the PS and place it on top of the night sky**.

Hover over the Layers panel, select the People layer, and click the Adjust Layer button below the layer.

In the pop-up menu, select: Hue Saturation.

Next, pull the slider here to the left to the end. Its parameter is displayed as -100;

Then, a silhouette effect comes out.