The router is not able to access the internet after being set up again

The router can't connect to the internet.

More often than not, when our computer can't play, we all wonder if it's a problem with the computer. And if our computer can get the IP normally when still can't access the Internet, this may be the problem of the router, if you encounter the problem that the router can't connect to the Internet, the following will introduce the solution for you.

The router can't connect to the internet.

1. First of all, make sure that your network cable is connected correctly. That is, the network cable of the external network is connected to the WAN port of the router or cat, and the network cable of the computer is connected to the LAN port

2. After the network cable is connected correctly, be sure to set the correct Internet account and password in the router WAN settings;

3. When your WAN connection is correct and the account is configured correctly, we can check the running status of the WAN port in [Running Status]. If you get a DNS server, there is no problem;

4. Your router also needs to enable DHCP service. On the left, select [DHCP Server], and then select [DHCP Service]. Set the DHCP server on the right to [Enabled].

5. Then, when setting up wireless, it is recommended to set the wireless channel to [Commonly used];

6. After the settings are completed, remember to restart the router;

7. Turn on the computer again to confirm the settings, go to [My Computer] - [Management] - [Services and Applications] - open [Services], and then turn on all network-related services;

That's it for the router that can't connect to the Internet, I hope the above introduction can help you.

Modern people are inseparable from the network, you must know that every household has installed a wireless router, which is more convenient for people to use, but there will be some small faults in the process of use, it is better to understand some in advance. Let's introduce to you what to do if you can't get on the network after the router is reset.

What should I do if I can't connect to the Internet after the router is reset?

You can follow these steps: First, you need to go to the router's settings page, fill in the broadband password again, and click Save. Finally, redial it through the router to connect, and it is generally connected.

How to choose a home router.

1. Look at the wired port specifications.

When buying a wireless router, not only look at the wireless transmission speed, but also check the specifications of its line port, you must know that this is also divided into 100 Gigabit and Gigabit two specifications of the router, generally speaking, like the Gigabit port can exceed the 100 Gigabit requirements, if it is less than 100 Gigabit, you have to choose a 100 Gigabit router.

2. Look**.

At present, there are expensive and cheap ones on the market, for ordinary families, you can choose from almost 200 to 500 yuan, there is no need to buy too expensive, but if it is less than 200 yuan, it is not recommended to buy, you must know that this kind of *** can only buy a 100 megabit port router.

3. Look at the function.

When most people buy a wireless router, they have an idea that the more functions, the better, in fact, this idea is wrong, for the wireless router is not flashy, not the more antennas, the better the signal, to know that a wireless router to play a good role, can be placed in a very critical position, the closer it is, the better the signal.

Summary:About what to do if you can't get on the network after the router is reset, the relevant content is introduced here,You can deal with it according to the above methods,You must remember to save it during processing,Connect it to it。 If you want to know more about related knowledge, you can consult Qijia.com.

It may be that the settings are wrong, or the gateway IP is conflicting.

It is recommended to log in to the router settings page again and check whether the settings are correct.

In general, most routers choose the connection mode of dynamically obtaining the IP, and the wireless name and password can be set at will.

If the gateway of the router is the same as that of the optical modem, you need to modify the gateway IP address of the router, otherwise the IP conflict will cause you to be unable to connect to the network.

In the LAN port settings of the router, change the gateway IP to 192 168 2 1, etc., save and restart the router.

After the card router is set, it cannot access the Internet.

If it is not set up, reset the wireless router.

Does the cat connect to the wireless router, do you do this:

Plug in the wireless router, don't pick up the cat first, reset the wireless router (restore to the factory), and connect the computer to any LAN port of the wireless router.

Enter the gateway address of the router in the address bar of the browser (on the label on the back of the router), and enter the settings page according to the PPPOE (ADSL virtual dialing) method.

Then set the SSID, encryption method, and password.

Save, restart.

After setting, connect the network cable from the cat LAN port to the WAN port of the wireless router.

Reset the router:

1.Change the local connection to automatically get an IP address.

2.When the wireless router is plugged in, do not connect the home network cable first, reset the wireless router (restore the factory), connect the computer to any "LAN" port of the wireless router, enter the setting page, and set it according to the PPPoE (ADSL virtual dialing) method. Then set the SSID, encryption method, and password.

Save, restart. After setting up, connect the home network cable to the "WAN" port of the wireless router.

Follow the above two steps and you try.

The router is set up, the wifi is connected, but the phone still can't access the Internet, what's going on?