How to connect a computer to a digital TV mobile phone to a router to achieve simultaneous Internet

I recommend a more convenient method, provided that the computer is connected to the Internet and the laptop has Bluetooth.

**A bluesoild bluetooth configuration management software, and then synchronize it with the synchronization software on the mobile phone, and set the default connection method, the next thing is to set the default connection of the mobile phone to the synchronous connection.

Another way is to sync the phone with a data cable, and the phone can also access the Internet.

The method of using a router to bring your home computer and IPTV set-top box online at the same time is as follows:

1. Use a wireless router to connect multiple computers and TVs at home: wireless routers, wireless network cards, set-top boxes, modems (also known as cats).

2. Computer connection mode: the external network cable is connected to the ADSL interface of the modem (also known as the cat), and another short network cable is inserted into the LAN 1 interface of the modem;

3. Connect the other end of the LAN 1 interface cable of the modem to the WAN interface of the wireless router;

1. Turn on the TV and find that the wifi in the upper right corner is a red exclamation mark, which is not connected.

2. Find the TV settings, which are generally on the TV remote control.

3. After opening the settings, find the network and link.

4. Select Wireless Network.

5. Find the wifi you added, select the link, and enter the password.

<>7、The second method is to connect the TV directly with the network cable,Use a network cable,One end is plugged into the routerlanport,The other end is plugged into the network cable socket of the TV,This is relatively simple,The speed is also relatively stable。

The method of using a router to bring your home computer and IPTV set-top box online at the same time is as follows:

1. Use a wireless router to connect multiple computers and TVs at home: wireless routers, wireless network cards, set-top boxes, modems (also known as cats).

2. Computer connection mode: the external network cable is connected to the ADSL interface of the modem (also known as the cat), and another short network cable is inserted into the LAN 1 interface of the modem;

3. Connect the other end of the LAN 1 interface cable of the modem to the WAN interface of the wireless router;

Generally, you can introduce a broadband network cable into the router, and then distribute the network signal to the computer and TV through the router. Here's how:

1. Connect the computer and router first, and set the router to connect to the broadband network;

2. Power on the cat, router, and computer; Open the browser on your computer, enter the settings of the router (take tplink as an example)**", enter "admin" in the pop-up username and password dialog box, and then log in to the router's settings interface.

3. In the settings interface of the router, click the WAN port setting under the network parameters on the left, enter the broadband account and password of the user's network, and then click Save; The router is successfully connected to the broadband network.

4. After completing the router settings, save and exit the router settings and restart the router. At this time, the computer can be connected to the router to surf the Internet, and you can open the web page to surf the Internet for testing.

2. Set up the network where the TV is connected to the router;

1. Required conditions: TV, networked router, network cable;

2. Connect one end of the network cable to the LAN port of the router and the other end to the network interface of the TV.

3. Turn on the TV, operate the TV with the remote control, and enter the "System Settings";

4. Under the interface of system settings, select "Network Settings" on the left, click on the right to appear the detailed interface of network settings, select "Wired Settings" and click to enter.

6. Through the above settings, both the computer and the TV can be connected to the router at the same time.

Method 1:

1.Log in to the wireless routing settings page... Turn off DHCP.

2.Set to turn on wireless and set a wireless password;

3.Change the LAN IP address to 1

Note: When setting up the wireless router, the wireless router should not be connected to the cat first... The wireless router is only connected to the computer.

OK,It's set.。。。 Note!!! Wiring method: the WAN port of the wireless router is not plugged into any wire (it does not work if plugged in), the cat sent by telecommunications) - LAN port - wireless router - LAN port --- desktop;

But this one has a drawback: you need to dial up your desktop, and you need to turn on your network desktop...

Method two. 1.You connect the wireless router only to the computer, then enter the routing settings page, select PPPoe dialing, fill in the broadband account number and password, etc.

2.Set to turn on wireless and set a wireless password;

3.Finally, change the LAN IP to .

OK, it's over.

Note: When setting up the wireless router, the wireless router should not be connected to the cat first... The wireless router is only connected to the computer.

Note: Wiring method, connect according to the normal wiring method of routing - cat --- WAN port - wireless router - LAN port - desktop (in this case, you do not need to open the desktop, mobile phones, laptops can access the Internet at any time).

Telecom sent that is the cat.。。。 It's just a wireless cat.。。 Alas.

It is recommended that you just ask the telecom staff to help you get it, because each router is different and you can't speak clearly, and the telecom staff can set it up in a few minutes.

To do this, you need to buy a switch first. The cat is connected to the switch, and the switch is connected to the router and IPTV, so that it can meet your requirements, both to watch TV and use wireless functions, and the computer can also access the Internet. Without a switch, it's useless to just set it up in the router.

If you want to use it at the same time, you must have a front switch.

1. The TV uses a wired connection.

2. The mobile phone can be connected to the wireless of the router.

How to connect your TV to a router].

Does the TV support WiFi? Support networks are also OK. Connect the network cable directly from your router. Use wireless wifi for mobile phones!

My home TV can be connected by itself,But when I installed the computer, I asked someone for a LETV box,You see if there is a network connection in the settings。

The basic idea is this, the router is set up, and then you don't need to dial up the others.

Wireless Internet access for TV.

The computer is connected to a wired router.

Connect the network cable to the WAN port of the router.

Then pull the cable from the LAN port of the router to connect to the computer.

Log in through the computer to set up the router.

The username and password are admin

Follow the wizard to set up your Internet access settings (PPPoE, enter your Internet access account password, set up wireless security PSK-web2 and set wireless password).

That's it all, it's all restarted.

First of all, you need to debug the router normally, so that the router can provide wired and wireless ways to surf the Internet normally.

The desktop does not have a wireless network card, and it is intelligently connected to the router via a network cable.

Router connection method: The network cable of the ADSL cat or optical modem is connected to the WAN port of the router, the desktop network cable is connected to the LAN port of the router, and the TV is connected wirelessly.

Router Setup Notes:

1. Set WAN to PPPoE (applicable to most home users);

2. To enable the wireless function;

3. To enable the DHCP function;

4. To enable the dns**** hair) function;

All 4 of the above are done, and your computer and TV can access the Internet normally under the condition of automatically obtaining routes.

For security purposes, it is recommended that you enable MAC address binding on your router to prevent network rubbing.

You shouldn't need a router, it's good to have a cable.

You can connect it directly with a cable, and I've seen people use it in the mall.

Clarify connections.

Network devices are connected in the following relationships:

Broadband leads, access modems (ADSL modems or fiber modems), the network port (usually one) of the cat is connected to the uplink port of the router.

The computer can be connected to any of the four downstream ports of the router through a wired network cable.

2.Set up a wireless router.

In a wireless router, you need to set up uplink dialing and control for downstream connections.

The computer uses the automatic IP acquisition method, and after connecting the router through the network cable, it enters the management interface of the router, usually entering the management IP address of the router in the browser. The IP address is on a label on the router and includes the login username and password.

Once there, click on WAN Settings and enter the username and password used for dialing. Save.

In Wireless Connections, select the name and password of the wireless access point you want to use, and save the logout.

3.Connect to broadband.

In the notebook or mobile phone and TV, find wireless, after entering, find the name of the wireless access point of the router, click "Connect", the password input box will generally pop up, enter the connection password to make sure that it can be connected correctly.

1. Set up a wireless router 2. Select your wireless network in the network connection of the computer and the network set-top box respectively, and save the settings. (The password is entered by yourself when you set up your wireless router).

You can set up a router on the computer,There is a network setting on the smart TV to change it to a wireless connection,You can use it when you receive a signal and connect it。

Does the wireless router have a split port, if there is, plug it in. If you don't have one, buy a fork.