How to choose porch tiles, how to choose the color of porch floor tiles

How to choose porch tiles? Few people put the most effort into the small area of the entrance. In fact, the entrance is a necessary place to enter and exit the house, and although the area is not large, it is used very frequently.

The exquisite and atmospheric design of the entrance can reflect the owner's taste and also leave a good impression on the guests. And a good entrance design, of course, is inseparable from beautiful tile paving. belowJiangsu I music decoration

First: paving tiles is a common choice for the floor of the living room, you can choose dark tiles to hook the floor of the entrance to show the difference. Or you can choose the same texture as your living room, but with darker colors and more complex patterns.

You can also use ordinary floor tiles to pave diagonally at the entrance, which can be regarded as "DIY parquet floor tiles". If you choose the exact same floor tiles for the hallway and living room, you can add carpet or floor mats to distinguish them.

Second: if conditions permit, you can choose to form a division of parquet modeling, the inlay is more artistic, the thickness and pattern can be customized, and the workmanship and paving are also more exquisite, so the cost will be higher.

Third: Because the entrance is the gateway to home, it is also a necessary place for people to go. The entrance floor is used very frequently, so no matter what tile you choose, it must be wear-resistant, non-slip and easy to clean.

That's itJiangsu I music decorationFor the introduction of how to choose porch tiles, different spaces due to different functions, frequency of use and use of different needs, in the ground material of course.

First, look at the appearance.

The color of the tile should be uniform, the surface finish and flatness should be good, the surrounding rules should be regular, the pattern is complete, and four or five pieces should be extracted from a box to see if there are defects such as color difference, deformation, lack of edges and corners.

2. Listen to the sound.

Tap with a hard object, the crisper the sound, the higher the degree of porcelainization, and the better the quality. You can also use the thumb, index finger and middle finger of the left hand to clip the corner of the tile, hang down easily, and tap the middle and lower part of the tile with the index finger of the right hand.

3. Drip test.

You can drop water on the back of the tile to see how fast the water soaks after it spreads, generally speaking, the slower the water absorption, the greater the density of the tile; On the contrary, the faster the water absorption, the sparse density, and its intrinsic quality is superior.

Fourth, the measurement. The higher the accuracy of the side length of the tile, the better the effect after paving, and buying high-quality tiles is not only easy to construct, but also can save man-hours and accessories. Use a tape measure to measure whether there is a difference in the size of each tile, and the high accuracy is the top grade.

In addition, observe its hardness, ceramic tiles with good hardness, strong toughness, not easy to break and rot as the top quality. The edges and corners of the tile fragments are scratched on each other, and the broken fragments are inspected to see whether the broken parts are fine or loose, whether they are hard, brittle or soft, whether they leave scratches, or scattered powder.

First, the type of porch tiles.

1. Polished tiles.

2. Mosaic.

3. Whole-body bricks.

4. Vitrified bricks.

Second, how to buy porch tiles.

1. Determine the decoration style before selecting floor tiles, make money in the selection of land, first understand the home decoration style, and select the appropriate floor tiles according to the decoration style. If you don't know about the decoration style, just buy floor tiles, no matter what the quality of the floor tiles is, it will bring bad results to your decoration.

2. Determine which spaces are suitable for floor tiles, in home decoration, each space is different, and the materials used will be different. Therefore, it is important to determine in advance which spaces are suitable for tiling. Where there is a lot of water, it is better to stick to the floor tiles than to the floor.

For example, kitchens, toilets, bathrooms, etc. are suitable for floor tiles, while living rooms and bedrooms can choose floor tiles or floors according to their preferences, as long as they conform to the overall decoration style.

3. Choose floor tiles and use less large-size floor tiles, and the specifications of home decoration floor tiles are 800, especially the living room tiles, as well as specifications of more than 1 meter. Among them, glazed tiles are commonly used for home flooring, and there are two specifications: 300mm 300mm and 330mm 330mm. If the bathroom is about 2 square meters to 4 square meters, it is recommended not to use large floor tiles.

The bathroom space is small, there are many corners, too large tiles need to be cut frequently, which is very wasteful, and the ground leveling is also a little difficult, and the installation of floor drains is not very convenient.

1.Hexagonal brick hexagonal brick is a style of literary tile collocation, it is used on the ground of the entrance, when you enter the door to change shoes, the hexagonal brick under your feet can make people feel a petty bourgeois elegant comfort and literary temperament, through a variety of color combinations, it can make the entrance appear interesting and advanced.

2.Hexagonal bricks are a better solution for the entrance.

3.Matte gray bricks because the shoes are changed when they go out, so the porch is a space that is easy to get dirty, and by laying matte gray bricks in the porch, the porch can be made more simple, dirt-resistant, and easy to take care of.

4.The entrance is paved with gray bricks, which is simple and dirt-resistant and beautiful.

At the entrance, tiles printed with Taiji diagram are generally used, because this can play a psychological role, that is, there are predecessors (that is, your ancestors) are protecting you, and you will naturally be full of confidence and move towards the future!

The entrance is a dust area, which is mainly considered for dirt resistance and good looks. Dirt-resistant: matte bricks, bright bricks, light bricks, dark bricks.

Bright bricks and dark bricks are more likely to be dirty, so it is best to choose light-colored matte bricks, such as beige, gray, etc., which are versatile and not easy to overturn. If you have matte bricks, it is recommended to buy 1916 tiles, and the Foshan brand is also well-known there.

Vitrified brick is a kind of full ceramic tile made of quartz sand and mud fired in a certain proportion. After polishing, the surface of vitrified tile is as smooth and translucent as glass, and it is the hardest of all ceramic tiles. Among the main advantages:

The color is bright and soft, environmentally friendly, the brick body is lightweight, and the corrosion resistance is very strong, but the disadvantage is that the cost of vitrified bricks is high, and it is widely used in public spaces such as living rooms, entrances, kitchens, etc., and the effect is very atmospheric.

The color of the entrance floor needs to be considered, how to choose the color of the entrance with virtual attack floor? Today, PCHOUSE will answer them for you one by one.

The choice of the color of the entryway floor will directly affect the style and atmosphere of the home, and of course, the layout of the entryway walls.

1. The use of vitrified bricks, due to the relatively small area, the use of 600 * 600 specifications, the color of beige and milky white can be.

2. You can use similar tones to match the design, and generally the walls and floors are matched with light-colored stupid tiles, so that the whole looks relatively clean.

3. The selection of entrance floor tiles also needs to take into account the decoration style of the home, for example, for the American style, we usually choose to use retro floor tiles on the ground to match, the color is darker, and it is more textured and beautiful.

The first floor tile should be complete.

The first floor tile in the door is best to be a whole piece, which can give people a pleasant and comfortable psychology, if it is a few small tile collage, on the one hand it seems to be crumbling, on the other hand, it is not psychologically comfortable. Professional decoration masters, tiles are pasted from the door, so that you can avoid collage tiles at the door, and you can put the position that needs to be collaged in an inconspicuous place against the wall to ensure that it is beautiful and generous. The benefits of this are the effect of attracting wealth in Feng Shui, and it can also affect the fortune of the whole family.

Don't be too smooth.

The smooth floor is a manifestation of beauty, and it will also appear clean, but too smooth is often excessive, and it is unsafe for those family members with the elderly and children, and the floor that is too smooth is easy for people to fall hard, which will affect the personal health of family members.

From the point of view of Feng Shui, it is not good for the floor at the entrance to the door to be too smooth, it represents a kind of reflection of the ground, which is easy to cause the fortune and good fortune brought in by the owner to be reflected by the reflection of the ground and not retained indoors. Considering a smooth floor from a safety point of view, I don't understand, but from the perspective of feng shui, a smooth floor also affects the financial luck of the whole family.

Hello! 1.Of course, the ground is made of vitrified bricks, and due to the relatively small area, 600*600 specifications are used; The color beige and milky white are fine, and I recommend using beige better

2.**The color of the floor is similar to teak (if you say it is slightly yellow), as long as the living room floor and vitrified bricks do a little floor treatment, it is two areas, which will not affect the effect

3.If the wall and floor tiles are all blue, then the top surface is best to use light gray, and the contrast with white is slightly larger, after all, the area of the top surface is small

Hope mine is helpful to you