Where is Patek Philippe after sales? Find the address

Method 1: If water enters the case, you can use a granular substance called silicone to put it into a closed container with the watch that has accumulated water, and after a few hours, take out the watch and the water will disappear. This method is simple and economical, and there is no damage to the accuracy and longevity of the watch.

The silica gel that has been absorbed many times can be dried at 120 degrees for several hours, and the water absorption capacity is renewable, and it can be used again and again.

Method 2: If the water ingress is not serious, but there is a layer of fog in the surface glass, then you can use several layers of toilet paper or flannel cloth that is easy to absorb moisture to wrap the table tightly, and bake it at a distance of 15 cm from a 40-watt light bulb for about 30 minutes to eliminate the moisture. Do not bake the watch mask directly close to the fire, so as not to deform the watch by heating.

You can also put the mask facing inwards and the bottom shell facing outward, and wear it on the wrist backwards, and the moisture can be eliminated after two hours. If the water ingress is severe, it is best to immediately send it to the watch shop to wipe the oil and remove the moisture from the movement to avoid rust on the parts.

Method 3: Put the surface face inward, the bottom shell facing outward, and wear it on the wrist, and the moisture can be eliminated after two hours. If the water ingress is severe, it is best to immediately send it to the watch shop to wipe the oil and remove the moisture from the movement to avoid rust on the parts.

What should I do if my watch gets water?

1. If the watch is soaked in water, you can wrap the watch tightly with several layers of toilet paper or flannel cloth that is easy to absorb moisture, put it at about 15 cm near a 40-watt light bulb, and bake it for about 30 minutes, and the water vapor in the watch can be eliminated.

2. Put it in a rice jar and bury it deep in the dried rice for a period of time, if it is fast, you can see obvious results in one night.

3. You can use a granular substance called silica gel to put it into a closed container with the watch that has accumulated water, and after a few hours, take out the watch, and the water will disappear.

4. Take a hair dryer to dry, and then apply a layer of transparent nail polish on it to avoid impurities and prevent rust.

5. If there is water vapor in the watch, you can wear the watch face inward and the bottom shell outward, and wear it on the wrist to eliminate the water vapor in two hours. If there is too much water in the watch, the case must be opened and scrubbed. If you are not sure to deal with it yourself, you should send it for repair in time.

1. Wrap the table tightly with several layers of toilet paper or flannel cloth that is easy to absorb moisture, and bake it under the bulb for about 30 minutes to eliminate the water mist inside, but do not put it close to the bulb or bake it directly, so as not to cause the surface to be heated and deformed.

2. Put the surface facing inward, the bottom shell facing outward, and wear it on the wrist, and the water mist in the surface can also be eliminated after a few hours.

3. If there is silica gel, you can put the silica gel and the watch into a closed container together, and after a few hours, take out the watch again, and the water mist in the watch can disappear.

Hello, glad to answer for you!

1. If the water ingress is not serious, but there is a layer of fog on the surface, you can use toilet paper or flannel cloth that is easy to absorb moisture to wrap the table tightly.

3. If the water ingress is serious, it is best to send it to the after-sales center for maintenance immediately.

If you have any questions, please call** Please feel free to call.

It is recommended that you can open the warranty coupon attached to the purchase of the watch, under normal circumstances, there will be a service address on the warranty copy, or find a regular watch service center for testing and maintenance of the address of the store, etc., if there is a professional after-sales maintenance center nearby.

There are many luxury watches, but when it comes to the number one watch, the answer is always Patek Philippe.

If you had to ask which of the world's best watchmakers and the best top complications is the watchmaker? The answer is always Patek Philippe, Patek Philippe, Patek Philippe. Real estate, yachts, and airplanes are usually out of sight, and watches are often worn on the hand and can be seen almost anywhere.

So the watch is definitely the first symbol of status. It is the only one that will accompany you 24 hours of the day. As the top 10 of the world's top 10 watches, each Patek Philippe model is a revolution and a target that collectors and watch enthusiasts are passionate about.

Patek Philippe is justifiably expensive, with a process that takes a craftsman a full year to complete, and only 50,000 pieces per year, making it a prime example of slow work (Rolex produces 14 times as much). Patek Philippe's Grand Complication chronograph series is one of the most favored series of the rich, and each piece can be sold for up to 500,000 US dollars (equivalent to about 4 million yuan). In watchmaking, "complication" refers to the functions of a mechanical watch other than striking the time and a simple date indication.

Patek Philippe has always maintained a tradition of complications that focus on everyday practicality, such as the annual calendar, dual time zones, and world time displays. Complex watchmaking is the ultimate test of a designer's expertise and a watchmaker's skill.

Patek Philippe has a total of 252 parts, which are assembled entirely by hand by artisans. With such a small part, you can imagine how delicate the production process and equipment technology are. The Patek Philippe factory was built in 1996.

It takes 10 years to train a Patek Philippe watchmaker, and in this building, the watchmaker is a quiet master artist. Artisans sit at their workbenches and carefully assemble their watches. The craftsmen assemble the watch strictly according to the drawings, ensuring that every part is in the correct position.

Patek Philippe's assembled movements have long been admired by collectors. The assembled movement must meet a number of stringent requirements in terms of technical processing and surface treatment in order to receive the Patek Philippe seal.

Block 2, Grand Gateway Center, No. 3 Hongqiao Road, Xuhui District, Shanghai.

Patek Philippe watch after-sales repair service process:

1.Make a reservation online or call the service** to confirm your arrival date.

2.Take your watch to a service location.

3.A professional watchmaker will carry out a pre-inspection of your watch to confirm the problem with your watch and the services required.

4.Our service specialist will tell you about our service plan, once you confirm the maintenance, your watch will enter the normal maintenance process, please do not cancel the service.

5.Our professional repairers will carry out professional maintenance according to the problem of your watch.

6.Once all maintenance has been completed, your watch will pass our quality inspection process before it is considered complete.

7.The service store will notify you by SMS to come to our front desk to collect your watch.

8.If there is a cost involved in the purchase of your watch, please pay for the maintenance at the time of pick-up. If the document is lost, please be sure to report the loss at the front desk of the service store or call the 400 service store** to report the loss.