Patek Philippe stopped at night, and Patek Philippe week adjustment stuck

Our mechanical watches often have the situation that the time is not accurate, and most people wonder if the mechanical watch is broken. There are many reasons why a mechanical watch can be parked, but there are several main reasons.

1. Insufficient kinetic energy: The watch is not winded enough, and the kinetic energy is insufficient. In particular, automatic watches require more arm movement, and the winding efficiency is very low. If you usually exercise a little bit, you can wind it manually, which can ensure enough kinetic energy.

2. Gear failure: Gear train failure such as deviation wheel and center wheel failure will lead to the condition of stealing stop of the watch. These situations are often not easy to detect and require disassembly, careful inspection and testing to find out the problem and solve the problem.

3. Lack of maintenance: mechanical watches should be maintained every 2-3 years or so. If it is not maintained for a long time, a large amount of oil sludge will be generated inside. Friction between gears increases, causing slippage.

There will be after-sales ** on your warranty link, call after-sales ** to inquire about the after-sales address.

Patek Philippe watches stop when they go because the watch does not do a good job of regular maintenance of the watch during long-term use, which leads to the failure of the watch's kinetic energy storage system, resulting in the watch being stopped when walking. It is recommended that Patek Philippe watch users should promptly send their watches to a professional watch repair center for repair in such a situation.

Service**Patek Philippe Watch After-Sales Service Center.

Why did Patek Philippe watches stop?

1.For mechanical watches can be divided into automatic winding and manual winding, when the mechanical watch is insufficient kinetic energy or long-term placement, if there is a stop-and-go situation, it is a very normal situation, only need to supplement the kinetic energy to "it".

2.Affected by external collisions, although the watch is generally shockproof, but sometimes the watch can not be avoided by a violent collision, this situation sometimes causes the watch individual parts of the "stuck" phenomenon, if the problem is not very serious, the activity is good, if it is serious, send it to repair it!

3.The problem of magnetism in the movement, if some mechanical watches are exposed to a strong magnetic field (such as audio, etc.), it will cause the movement to go faster, and if it is more serious, it will also cause the watch to stop, which is mainly because the slender hairspring in the movement is "sticked" together.

Stop, there may be the following reasons:

1. See if the crown is pulled out, the crown is pulled out, and the watch stops.

2. Whether the second hand touches the glass, there will be a circle mark on the glass.

3. Whether the three watch hands are not well balanced, causing contact and causing stopping.

4. Whether the battery is exhausted or not, it generally needs to be replaced in 1-2 years.

In fact, there are many reasons why mechanical watches do not go, such as: bumps, movement gear misalignment, magnetization of the watch, shelving for a long time, sludge drying, etc., generally divided into two kinds, the first is because of insufficient kinetic energy. The second is due to a malfunction of the mechanical watch.

Therefore, don't panic too much when you find that the mechanical watch is not leaving, and first distinguish which kind of big one it belongs to.

1. Insufficient power reserve. You need to check whether the power is sufficient, if the amount of movement of the self-winding mechanical watch is small, it may also cause insufficient power reserve, you can supplement the power by manual winding, and then observe whether there is a phenomenon of speed and slowness, if it is still recommended to go to the store for testing.

2. The power is insufficient. If the quartz watch suddenly finds that it is slowing, it is likely to be caused by insufficient battery energy.

3. Having been beaten or impacted. The watch is very tight, if it is hit or dropped, it may cause loose damage to the internal parts, and it may also cause time problems, so it is recommended to go to the store for testing.

4. Maintenance is required. A lack of oil or wear and tear of the internal parts of the movement can cause time-keeping problems and require maintenance.

5. Under the influence of ambient temperature, the watch is magnetized: if the hairspring of the watch is magnetized, the watch will not be accurate. The influence of the wearer's usage habits may cause an increase in the error of the time, which will be sent to the store.

Note: 1. Mechanical watches vary according to the model and manufacturing quality of the movement, and the error of the general watch within 30 seconds per day is within the normal range. Some of the higher precision movements can reach around 10 seconds.

The more common reason may be a lack of kinetic energy, but some friends may say that I buy a fully automatic mechanical watch, and I don't need to wind it myself. In fact, this is a big misunderstanding, automatic mechanical watches do not need to be wound manually, but to keep the mechanical watch on the hand to wear at least 8 hours of time, because the automatic mechanical watch is the use of the arbitrary swing of the rotor to wind up, and the rotor is swinging with the movement of the arm, so if the mechanical watch needs to be worn on the hand often.

But what if you wear it on your hand a lot and don't leave? Don't worry, it may be a lack of kinetic energy, and then we need to manually wind the clockwork.

After passing the above methods, what should I do if I also find that the machine is not gone? Here we can rule out the reason for the lack of kinetic energy of the mechanical watch, it should be that the mechanical watch is faulty, if you are not a watch professional, it is best not to disassemble it rashly, please send it to a professional watch repairer for repair. Before the watch bar talked about the maintenance method of mechanical watches, mechanical watches need more maintenance than quartz watches, here is an emphasis on the maintenance methods of mechanical watches:

1.If it is a manual mechanical watch, the mechanical watch should be wound regularly, and it is recommended to wind the mechanical watch around 8 pm.

2.Automatic watches, such as insufficient arm movement, need to manually wind the watch, and the rotation of the crown needs to be controlled within 20 turns.

3.If an automatic watch has not been worn for more than 40 hours, it is necessary to turn the crown twenty times to activate the movement's drive system.

4.Regardless of the water resistance of the watch, it should be avoided as much as possible, and if it does, wipe it dry and make sure that the crown is locked at all times. It is best to replace the waterproof ring once a year.

What should I do if the mechanical watch is gone? We need to establish the common sense of protection of mechanical watches in ordinary times, and when we encounter the situation that we can't go, we don't need to worry, and we can eliminate them one by one according to the above methods, which are usually caused by insufficient kinetic energy.

Summary. 1.Why does the date of a mechanical watch stay yesterday and how to adjust it.

If the date of the mechanical watch stays yesterday, then take a look at whether you can manually adjust the date, if you have just used it may not be set well, the date of the watch is 24 hours, if you say that you adjust the watch at 1 o'clock and adjust the watch at 13 o'clock is not the same. Because the watch is a 12-hour circle, a day is 24 hours, 24 hours will jump, if the mechanical watch is less adjusted a turn, it is 12 hours slower, although the time is accurate, but the date is slow, that is to say, the watch will jump at 12 noon. Therefore, you should look at the watch after 12 noon today, whether it is today's date, and then pull the watch to the time adjustment gear, turn around, adjust to the afternoon time, and then adjust the calendar.

If you adjust it like this, the date problem of the mechanical watch is still not solved, and it is best to send it to the watch repair center for testing.

Patek Philippe's week adjustment is stuck.

1.Why does the date of the mechanical watch stay yesterday, how to adjust if the date of the mechanical watch stays yesterday, then first look at whether you can manually adjust the orange date, if you have just used it may not be set well, the date of the watch is 24 hours, if you say that you adjust the watch at 1 o'clock and adjust the meter at 13 o'clock is not the same. Because the watch is a 12-hour circle, a day is 24 hours, 24 hours will jump, if the mechanical watch is less adjusted a circle, 12 hours slower, although the time is accurate, but the date is slow, that is to say, the watch will jump at 12 noon.

Therefore, you should take this watch by hand to see if it is today's date after 12 noon, and then pull the watch to the gear of adjusting the time, turn it around, adjust it to the afternoon time, and then adjust the calendar. If you adjust it like this, the date problem of the mechanical watch is still not solved, and it is best to send it to the watch repair center for testing.

2.How to adjust the date of the watch: First of all, the watch handle pulls out the first gear to adjust the day and date, and pulls out the second gear to adjust the time; Then adjust the date and the day before the day before the date you adjust the watch; Pull out the crown again to the "adjust time" state when the hands stop, start to adjust the time, let the hands rotate clockwise (do not make the hands turn counterclockwise, there is a lot of damage to the time module Huaitong), then the action needs to be gentle, adjust the time until the hand indicates close to 12 o'clock, and find that the date and day of the week jump to the next day (that is, the day of the watch), this jump may not occur when the hour hand passes 12 o'clock for the second time.

3.Attention should be paid to the date adjustment of mechanical watches: the watch cannot adjust the date randomly, nor does it need to be adjusted every day, because the default of the watch is 31 days per month, so it is best to manually adjust the date every two months.

In addition, the date cannot be adjusted from 21 o'clock to one o'clock every day in a mechanical watch, because one may cause the reversal of black and white time, and the other may damage the date module in the watch.

Possible causes are: insufficient power of the watch, short wearing time, hairspring failure and bump failure.

The details are as follows:

1. The power of the table is insufficient. It is feasible to move the arm and bury the winding of the mechanical watch from the stool, but if the wearer has reduced the amount of exercise, or the watch is not worn for too long, the watch may not be accurate or stop directly due to lack of power. Of course, there is no need to throw your arms as a hula hoop for the sake of winding the watch, just do it normally.

2. The wearing time is too short. If it is really caused by too little exercise, just take off the watch and shake it horizontally for about 2 minutes before going to bed, of course, you can shake it for 4 minutes, because then it can walk longer. If the watch can be wound, it can also be wound clockwise by itself.

In order to make the watch last longer, it is recommended to leave it on the wrist for at least 6 to 8 hours a day.

3. Hairspring failure. If the above two reasons are not the same, it may be the cause of the original jujube potato rotten. Usually, if the amount of exercise is too large, the clockwork will be tighter.

If it is really a winding that causes a lack of power, it is usually between 9 and 12 p.m., when it is easy to stop if there is no one to push it. During this time, don't reverse the dial, many mechanical watches have a plastic calendar wheel, and if you are not careful, you will break the gear, if you break the tooth, it will be stuck at this time every day, or it will no longer jump until a fixed date. So the mechanical watch stopped.

4. Bump failure. The parts of the watch are very delicate and small, if you are careless and accidentally bump into it, or if you are fitness bumped. This can easily cause the movement parts to fall off or break directly.

All automatic watches must be worn or wound regularly in order to function properly. If the mechanism stops working for a long time, it will cause the watch to deteriorate for a long time. Generally speaking, the power reserve of a large three-hand watch is probably no more than 38 hours, which means that if you do not wear the watch for more than 45 hours, the watch will eventually stop due to the exhaustion of the mainspring.

Mechanical watches can generally be divided into the following two types: manual and self-winding. Hand-wound watches are powered by hand, and if the watch suddenly stops, you have to consider the lack of power.

Hand-wound watches should be wound at the same time every day as much as possible so that the watch has enough energy to function in the next 24 hours.

The principle of a self-winding watch: it operates by the action of the automatic winding mechanism that can tighten the mainspring by turning the rotor in any direction. That is, many cousins say that when you wear it, the oscillating movement has a sound similar to that of a balance wheel.

Cousins who don't know this principle, some even think that which part is loose and rotating, but it is not. It is a self-winding component that is automatically wound. Generally, a fully automatic watch should be worn on the hand for more than 8 hours a day to make up for the amount of clockwork, but it is not absolute, and it is adjusted according to the amount of exercise you have.

If you have a large amount of exercise, you can store enough energy on the wind, and you can wear it for a few hours to be used for a day, and you don't need to manually replenish the chain frequently. If the amount of exercise is small, it is necessary to properly supply the manual to maintain the normal mechanical operation.

If it is found that the reason why the mechanical watch does not go is not due to insufficient kinetic energy, it is that the mechanical watch is faulty and needs to be sent to a professional maintenance personnel for repair. Remember not to talk about mechanical watch disassembly yourself. Mechanical watches are driven by mechanical gears and clocksprings, and friction is inevitable when turning, so it is necessary to add oil and lubrication over time to reduce the wear rate of parts.

Otherwise, wait until something goes wrong to send it for repair, and the problem is often very serious.

Let's not consider the truth or falsehood, any mechanical movement of the watch you don't take it will stop, because his power comes from the barrel, the general automatic mechanical movement behind the rudder to wind the barrel, of course, you can also manually twist the crown clockwise to wind, if it is a hand-rolled movement, it can only be wound by the crown, so the mechanical watch you don't move it, it will definitely not go, even if it is a real Patek Philippe.