Back to Nantian , what to do if the walls are moldy

<>1. When there is mildew on the wall in a small area, you can use a (dry) toothbrush to brush away the mildew stains, and then gently wipe it with a soft cloth dipped in alcohol, which can dry the wall and prevent the growth of mold.

2. The use of mold remover, Biliang brand wall mold remover has a good effect, and gently spraying on the moldy wall can immediately solve the problem of mold on the wall. After the wall is dried, it can be waterproof and moisture-proof for a long time, and the mildew prevention effect will be better.

3. In the case of mildew spots on a small wall, that is, spots, you can not buy a must-light wall mold remover, and it is enough to use 80% alcohol to scrub the wall. Pay attention to ventilation when washing, and wear protective gloves, masks and glasses. In order to avoid re-emergence of mould, care should be taken to dry the walls thoroughly, eliminate the causes of mould, and properly heat and ventilate.

4. During the humid weather, try to open the windows as little as possible. In addition, try to keep the walls dry, and in wet weather, you can use dehumidifiers, air conditioners, and fans to absorb moisture from the walls. As soon as moisture appears on the wall or furniture, it should be wiped off immediately with a dry rag.

If a large area of the wall is moldy, it needs to be reprocessed by finding a well-known construction team. Because a wide range of mold on the wall may be barely internal, the result is a leak in the pipe, which needs to be repaired. At this time, it is necessary to find a construction team to carry out construction on the wall.

"Back to Nantian", what to do if the walls are moldy

1. Dry toothbrush: first use a dry toothbrush to brush away the mildew on the wall, and then use a cotton cloth dipped in an appropriate amount of alcohol to wipe the surface of the wall; 2. Bleach: Mix a certain proportion of bleaching powder and water evenly, then spray bleach on the moldy wall, then wipe the wall with a dry cloth, and finally brush the anti-mildew paint; 3. Waterproof repair agent:

There are many waterproof repair agents on the market now, which are very convenient and simple to use, just spray them on moldy walls.

How to prevent mold on your walls

1. In order to prevent mold on the wall, during the decoration, the wall can be coated with anti-seepage liquid to form a colorless and transparent waterproof adhesive film layer on the wall to prevent the immersion of foreign moisture.

2. If the wall is often moldy, it is necessary to check whether the waterproof layer is not done, and if this is the case, ask a professional decoration team to redo the waterproof layer.

3. If the room is humid, dehumidifier, desiccant and activated carbon can be used to prevent moisture and absorb moisture. There are a lot of moisture-proof and dehumidifying desiccants in the supermarket, and you can buy moisture-absorbing boxes and dehumidification bags to put indoors to prevent mold on the walls.

6. Dehumidify with lime and bamboo charcoal, use a small cloth bag to pack an appropriate amount of lime, tie it into a small bag and put it in the corner of the room, which can play an indoor moisture-proof effect, and the lime also has a disinfection effect, killing two birds with one stone.

7. If the wall is damp on a southerly day, be sure to close the doors and windows and take moisture-proof measures. In normal times, windows should be opened for ventilation to reduce the indoor water vapor content.

8. Use air conditioning, if the family conditions are good, you can also use air conditioning to dehumidify, and the air conditioner used in the family generally has a dehumidification function. However, the use of air conditioners to dehumidify is more power-consuming, and it is easy to catch a cold for a long time, which is not a long-term solution.

I concluded: The above is about what to do if the wall of Huinantian is moldy, I don't know if it will help you! The problem of mold on the wall is very common, it is recommended that you must deal with it in time, if you don't know how to deal with it, you can refer to the above tips.

1. Use mold killing water, 84 disinfectant solution or bleach solution (diluted to 5-10%) to wipe the painted wall, and wipe the mold plaque quickly. The method is to use a rag that is easy to wring out and wipe it, or use a small watering can to atomize it and spray.

2. Leave it in place for 24 hours and wipe it with water. Use a clean rag dipped in water and wring it out and wipe it, if the mold is serious, you can wipe one more solution. In order to avoid re-mold, attention should be paid to making the wall completely dry and slow down the damage of the bridge.

At the same time, friends whose walls are not moldy must prevent the walls from getting damp when returning to Nantian.

1. Close the windows in the morning and evening to reduce moisture ingress

Humid weather is serious to the wall, first of all, it is necessary to prevent humid air from entering the room. When it comes back to the south, remember to close the windows of your home. In particular, the south- and southeast-facing windows do not give humid air a chance to sneak inside.

Close the windows. The time is in the morning and evening every day, and the air humidity during these two periods is higher than that in the afternoon, if you don't close the windows in time, the moisture in the air will take the opportunity to enter the room. It is advisable to choose the window at noon and open the window for a short time.

2. Use desiccant and other products to absorb moisture

Some desiccant, moisture absorber boxes and other supplies can be bought in supermarkets and other places, and reasonable use can reduce the moisture in the home to a certain extent. In addition, you can also make your own moisture absorber box from lime, laundry detergent, etc.

3. Use air conditioners and dehumidifiers

If you want to be lazy, you can use dehumidifying appliances to help. Most air conditioners have a dehumidification function, which can be used to dehumidify when you go back to Nantian; In addition, you can also buy a professional dehumidifier on the market, although the cost of disturbance is higher, but the dehumidification effect is more wrong.

4. Check and clear the water vapor on the wall in time

During wet weather, check the dampness of the walls in your home regularly. If you notice that there is already condensation on the wall, you need to take countermeasures in time. Dry rags, dehumidifiers, air conditioners, etc. can be used to absorb moisture from the wall.