What s going on with the chainsaw always going to one side? Can anyone tell me how to fix it?

First, the preface of our factory with XK5040 CNC milling machine milling 051 chain saw guide plate rail shape, the tool relative to the machine tool XY direction of the movement as shown in Figure 1. In the process of processing, one end of the guide plate appears in a stepped shape, and the error is at Fig. 1a), which becomes two parallel facets from the end of the guide plate. The contour line of the surface around the guide plate has obvious regular convex and uneven wavy curves, which makes the workpiece seriously out of tolerance.

doi]:Body Snapshot]:

1. Preface Our factory uses x gongzhang 5. Patrol. The shape of the guide rail of the 051 chain saw guide rice is milled by animal husbandry control washing and milling, and the tool is in the XY direction of the machine tool relative to the circle.

In the process of processing, one end of the guide plate appears in a stepped shape, and the error is at Fig.la), from the end of the guide plate, it becomes two parallel facets. The contour line of the surface around the guide plate has obvious regular convex and uneven wavy curves, which makes the workpiece seriously out of tolerance. The gear of the spool valve with a pitch of 3 mm is forced to move from zero to point A (according to one control side, the other control sides have the same displacement, see Figure 3), so that the opening between the spool valve and the valve sleeve is 25 mm (oil inlet).

A high-pressure oil enters the plunger cylinder of the working cavity of the hydraulic motor from the day of oil intake....

It is estimated that there is a problem with the fastening device, and it is recommended to adjust it appropriately.

Summary. Hello, it is a pleasure to serve you. Chainsaw mistracking:

1. One side of the chain touches the stone, causing one side to become dull.

2. The grinding deviation on one side of the guide plate is generally caused by poor material or lack of oil.

3. When using a round file to cut the chain, the technique is not good, resulting in inconsistent blade angles on both sides, which will also cause deviation.

Take care of your own safety when using chain saws. I hope my answer will help you.

What is the reason for the chain saw to deviate.

Hello, it is a pleasure to serve you. The chain saw deviated: 1. One side of the chain hit the stone, causing one side to become dull.

2. The side of the guide is not worn on the board, and the general travel is caused by poor material or lack of oil. 3. When using a round file to cut the chain, the technique is not good, resulting in inconsistent blade angles on both sides, which will also cause deviation and pay attention to your own safety when using the chain saw. I hope my answer will help you.

If you are still satisfied with my service, please give a comment Thank you<> Hello, because I saw that you did not rate my last time, and I am very concerned about your experience with you. If you are satisfied with my service, I hope you can give a thumbs up! If you are not satisfied with my service, you can also click on my avatar and tell me in a private message, and I will definitely give you a satisfactory physical examination in the next service!

What's going on with the chainsaw always going to one side? Can anyone tell me how to fix it?

Hello dear, happy to solve the problem for you, <>

What's going on with the chainsaw always going to one side? Can anyone tell me how to fix it? A:

1. The chain is overworn, or lacks lubrication, the transmission friction increases, and the power transmission is blocked, which can be removed by replacing the chain. 2. The fuel of the gasoline saw is a mixture of gasoline and engine oil, and the mixed fuel ratio is not suitable, which will also cause insufficient power, please match the fuel as required. 3. The cylinder, piston and piston ring are worn, resulting in a drop in pressure in the cylinder, insufficient combustion and insufficient power, which can be eliminated by replacing the cylinder, piston and piston ring.

Li Yin 4. The fault of the carburetor can be eliminated by cleaning or replacing the carburetor ant. 5. The fault of the air filter can be eliminated by cleaning or replacing the air filter.

Look at the chain saw blade to see if there is a place for the blade, if so, file flat. If you are a novice, you must file the sharpest corner of the chain fast, so there will be no situation where the saw cannot enter, and the saw will not deviate.

Normally, the teeth should be staggered slightly in different directions, so that the front saw slit does not affect the feed of the rear blade. Otherwise, the saw gap is too narrow, and the blade behind it will jam, and it will not be able to saw.

What's going on with the chainsaw always going to one side? Can anyone tell me how to fix it?

What's going on with the chainsaw always going to one side? Can anyone tell me how to fix it? Kiss! Hello, happy to answer your <>

Dear, what's going on with the chainsaw always going to one side? The original rough cain is as follows: 3 reasons 1 One side of the chain hit the stone, causing one side to become dull.

2. One side of the guide plate is abrasive, which is generally caused by poor material or lack of oil. 3. When using a round file to cut the chain, the technique is not good, resulting in the angle of the blade on both sides is not consistent, and it will also cause deviation! Hope mine can help you <>

Do you have any other questions?