What is the best waterproof material to use for fire fighting pools

Use JS permeation crystallization to make a second fortification to clean up the debris and floating mud on the base surface of the waterproof coating with JS mortar, and repair the seriously uneven concrete base surface.

2. Remove and clean up the oil and debris on the waterproof surface of the cement-based concrete structure, and then wash it with clean water, and paint the waterproof material on the wet base surface.

3. If it is found that there is serious leakage on the base surface, the leakage plugging material should be used for construction first, and then this material should be used to ensure the quality of the project.

4. The water-cement ratio is, the dosage is in, and the thickness is (for the standard.)

How much does it cost to scrape putty once per square meter?

1. K11 waterproof coating, the general construction process is, one cloth and three coatings.

Basic requirements: stable, clean, flat, no, no dust, no oil, no shedding and other debris substances. Obvious voids and sand holes should be plugged and smoothed with cement mortar, and sharp edges should be removed.

There is no need for maintenance after brushing, and it is easy to operate. The waterproof layer has good water resistance (when the water is soaked for a long time, the waterproof layer does not fall off and does not peel), which is green and environmentally friendly, and can be used for waterproof treatment of drinking water pools, swimming pools, fish ponds and other pools. It has good acid and alkali resistance, and can also be used as a waterproof general domestic sewage treatment tank, without the need for anti-corrosion.

Good impermeability and compression resistance, can be used to do waterproof and moisture-proof treatment of large pools, the water storage is more than several thousand tons, as long as the main body of the building is not deformed, its waterproof performance will not change. The disadvantage is that the waterproof layer cannot withstand the violent impact of heavy or sharp objects.

2. Cement-based permeable crystalline waterproof coating, the general construction process is roller brush or batch scraping on both sides, and the construction thickness is above. The basic requirements are concrete material, and the base surface must fully absorb water to saturation before construction, but there is no obvious water accumulation.

Cement-based permeable crystalline waterproofing coating is a rigid, permeable crystalline light gray powdery waterproof material, which is made of special cement and a variety of activations. Its special ingredients make it permeable inside the concrete, and form crystals with water to seal the cracks and pores inside the concrete, increase the compactness of the concrete, and achieve the purpose of thorough waterproofing. Therefore, the post-construction maintenance is very important, and it is necessary to spray clean water on the surface of the waterproof layer 1-2 times a day for a week before the closed water test.

Its outstanding advantage is that even if the waterproof coating layer is damaged, it will not affect the waterproof effect, and can be used to waterproof large sewage treatment tanks.

polypropylene waterproofing membrane for pool waterproofing; Polypropylene relies on the network void structure provided by the surface reinforcement layer and the cement material to achieve waterproofing, with good structural stability and no weakening with time. There are also waterproof coatings with high water resistance; For example, K11 waterproof coating, JS polymer cement-based waterproof coating and waterproof coating for pools, etc., have high impermeability and compression resistance, and long durability. It can also be water-tight; It is a highly efficient moisture-proof and impermeable material, which can not only be waterproof but also plug leaks.

Polypropylene waterproofing membrane polypropylene is achieved by He Liang relying on the reticulated air-to-void combustion gap structure provided by the surface reinforcement layer and the cement material directly solidified and bonded. The structural stability is good, and it does not weaken with time, and there is no requirement for the low moisture content of the main body during the construction period.

Commonly used materials for pool waterproofing include epoxy resin, waterproof coating, PVC waterproofing membrane, asphalt waterproofing membrane, etc. Among them, epoxy resin is suitable for concrete, masonry and other pools with relatively firm foundations, with good waterproof effect, but difficult construction; Waterproof coatings are easy to apply molds and are suitable for small-scale pools, but the waterproof effect is relatively poor; PVC waterproofing membrane and asphalt waterproofing membrane are suitable for large pools, and the waterproof effect is excellent, but the construction is also relatively difficult. It is very important to choose the right waterproofing material according to the situation.

Common pool waterproofing materials include renting Xunzhao:1Waterproof coatings:

Such as polyurethane, acrylic, epoxy resin, etc. 2.Waterproofing membrane:

Such as polymer cement waterproof coating, polymer waterproof mortar, etc. 4.Waterproof adhesives:

Such as polyurethane glue, acrylic glue, silicone glue, etc. 5.Waterproof membrane material:

Such as HDPE, LDPE, etc. Choosing the right waterproofing material needs to consider factors such as the material of the pool, the environment in which it is used, and the budget. It is recommended to consult a professional waterproof engineer or construction team before construction to ensure the waterproof effect and construction quality.

Pool waterproofing is usually sealed and covered with waterproof materials. Here are a few commonly used pool waterproofing materials::

Polyurethane waterproof coating: Polyurethane waterproof coating is a commonly used waterproof material with excellent waterproof performance and durability. It forms a tough waterproof layer on the surface that prevents moisture from penetrating.

Water-repellent coating: A water-repellent coating is a special coating applied to the surface of a building, usually made of materials such as polyyanamithane or acrylic resin. These coatings can increase the waterproofing properties of the building's surface and prevent water from penetrating.

Waterproof sealant: A waterproof sealant is a special sealant used to fill gaps or defects in the surface of a building. They are usually made of materials such as polyurethane or silicone, which can ensure that the surface of the building is sealed and waterproof.

Pool wall tile: Pool wall tile is a special tile used for the surface of a pool, usually made of waterproof material. These tiles are waterproof and prevent moisture from penetrating.

When choosing a pool waterproofing material, you need to consider the size and usage of the pool, as well as the factors of the surrounding environment. In general, high-quality waterproofing materials can provide a longer service life and better waterproofing effect. If you need waterproofing repairs, it is recommended to have a professional technician inspect and evaluate and choose the most suitable waterproofing material for your pool.

I believe we all know that the fire pool is a pool for storing fire water, and in order to avoid leakage, it also needs to be waterproof, so do you know what the waterproof practice of the fire pool is? Let's take a look.

First of all, level the base layer and clean the stains, if the water level is relatively high, you need to make blind ditches at the bottom and outside of the pool; secondly, brush about 1 to empty leakage lead millimeter of waterproof mortar on the screed layer as the interface layer; Then brush with a waterproof layer of 2 to 3 mm before initial condensation; Then, after condensation, brush a layer of waterproof layer that is perpendicular to the previous one; Finally, after the construction is completed, it needs to be maintained for 5 to 7 days.

2. What are the precautions for waterproofing the fire pool?

1. Before construction, it is necessary to check the drawings of the pool, and give detailed construction plans and technical guidance according to the drawings and the actual situation. The purpose of this is to avoid doing it all over again, after all, it will not only cause a waste of materials, but also lead to the loss of human and financial resources. In addition, with a detailed plan, the normal development of the construction project can be promoted, and mistakes and omissions can be avoided, which will affect the final quality.

2. When operating, it is necessary to pay attention to the technique and position, in order to increase the effect, the thickness is generally 2 to 3 mm, and the first and second are perpendicular to each other. In addition, we should also pay attention to the slope, under normal circumstances, cement will be used to find the slope, and pay attention to compaction, otherwise the effect is not good.

3. Finally, you need to finish up, mainly to pay attention to some convex parts, handover places and corner places, because in the normal process, how much will be missed, so in order to increase the effect, you should pay attention to these places. After all the processes are completed, it should be maintained at room temperature for 5 to 7 days, during which time it cannot be used, let alone water storage.

Summary: The waterproofing practices of fire pools and the precautions for waterproofing fire pools are introduced here, I hope the above content can help you. If you need to know more about it, please continue to ******, and more exciting content will be presented to you in the future.