What is the difference between a European single girder crane and an ordinary single girder crane?

The European crane is different from the previous domestic, Soviet-style and traditional cranes. Mainly contains: overhead crane.

Gantry cranes, jib cranes, explosion-proof cranes, etc. Although the design of the steel structure is basically the same as that of ordinary cranes, the performance of the Rifotin European crane is stable compared with ordinary cranes, the structure is compact, the weight is reduced, the height is reduced, the energy saving and consumption reduction are high, and the cost performance is high.

The differences between the Lifuting European single girder crane and the ordinary single girder crane are as follows:

1. Performance.

Compared with ordinary cranes, the performance of the Lifuting European crane is more reliable and the failure rate is higher.

Low, the reducer of the running mechanism of the Lifuting European crane adopts a three-in-one geared motor with a hard tooth surface.

The arrangement is compact and the operation is smooth. Forging wheel group, machining and boring assembly, high assembly accuracy and long service life. The steel plate is used to roll the drum to improve the strength and service life of the reel.

2. Self-weight.

Ordinary cranes are traditional cranes, also known as Soviet-style cranes, which can be traced back to the former Soviet Union.

Period, at that time, foreign countries had a technical blockade on China, and only learned crane manufacturing experience from the Soviet Union, but due to the cold over there, all the main beam structures and electrical components.

It is considered to be designed in the case of extreme cold, so it appears very bulky, backward technology, easy to break and other defects, an ordinary crane is about 30% heavier than a European crane.

3. Energy saving.

Ordinary cranes are clumsy and consume more energy, while European-style cranes are optimized to make the structure more compact and shorter in height. If the new plant is built, the use of Lifuting European crane, can reduce the height of the plant; If the transformation is added, the use of Lifuting European cranes can reduce the cost of transformation. Lightweight European-style components, flexible technology application, and optimized design of main beams.

The application of new energy-saving technologies such as European direct drive and variable frequency drive has greatly improved work efficiency.

First of all, put your mind at ease, friend. I happen to have had a similar experience before, and I can talk about it.

European single girder crane, with light weight, small structure and low energy consumption. The European-style crane adopts a unique design concept, which has the characteristics of small size, light weight and small wheel pressure. Compared with the traditional crane, the limit distance from the hook to the wall is the smallest, the headroom is the lowest, it can be closer to the front operation, and the lifting height is higher, which actually increases the effective working space of the existing plant.

The European-style single girder crane realizes the stepless speed regulation of frequency conversion between 0-45m min, and adopts a low headroom design, which can effectively increase the dispatch space, as well as the unique C-shaped structure, which correspondingly improves the dispatch space.

The European-style single girder crane starts and runs smoothly, without impact, and has a good silent effect, which can reduce the harm of noise.

The European-style single girder crane has a low failure rate, which reduces the maintenance cost to a large extent, and the service life is up to 30 years without worries.

The European-style optimized design not only has a light weight, but also can be programmed to lift and limit the position to achieve comprehensive protection, and the protection level is IP55 and H class insulation, which has a strong effect.

In the composition of the system, there is a hard tooth surface reducer, high bearing capacity, long life, electric disk brake, dustproof, self-debugging brake, no manual adjustment, semi-grease lubrication and high-strength galvanized anti-rust steel wire rope, maintenance-free, and there is a motor, brake, reducer three-in-one drive.

The European-style single girder crane can be applied to warehouse loading and unloading, material handling, mold assembly and other work scopes.

The main beam of the European-style single girder crane is mostly made of I-shaped steel or a combination of steel type and steel plate, and the lifting trolley is often assembled by chain hoist, electric hoist or hoist as a lifting mechanism component, which is used to lift goods on different occasions.

The European-style single girder crane adopts hardware configurations such as high-strength galvanized steel wire rope, disc brake, hard tooth surface reducer, programmable lifting limit, anti-cable-stayed rope guide, and is equipped with real-time monitoring, electronic anti-sway, inch function, micro-speed function, zero-speed hovering, 4G remote communication, remote diagnosis, automatic control and other intelligent modular functions, so as to easily realize intelligent handling.

There are many features of European cranes, but there are also many disadvantages.

One: First of all, let's talk about the advantages.

1: Smaller than normal footprint.

2: The steel is higher than the ordinary grade.

3: Low noise.

4: When there is a fault, it is easy to find the fault point when there is a hint 5: Smooth operation and good handling (because it is frequency conversion control, the effect of ordinary frequency conversion is also very good) 6: The failure rate is relatively low.

Two: Then let's talk about the shortcomings.

1: The cost is much more expensive than the ordinary one.

2: Although the fault point is easy to find, the accessories are not easy to buy in the general market, so the accessories are high, and the later maintenance costs are also very high.

3: The work level is relatively fixed, and there is no ordinary work level high (there are also ordinary low levels) 4: The structure is relatively simple (it is not convenient to overhaul) Do not blindly follow the trend when buying.

We manufacture equipment such as cranes (European style and ordinary).

To put it simply, the single girder crane is super cost-effective, and it is suitable for factories.

Single girder is a type of crane.

The crane contains many kinds, such as: single girder, double girder, gantry crane, double girder, gantry, etc. 1: single girder**low.

2: Easy to control (can be operated by air or remotely).

3: The single beam market is large and easy to maintain.

We manufacture equipment such as cranes.