How to solve the situation that the computer is always stuck?

Check: 1. If you can enter the BIOS interface, first enter the BIOS interface to check whether your CPU temperature is too high, generally more than 70° is considered a high temperature. That's enough temperature to freeze your computer.

If the temperature is too high, it is recommended that you disassemble the case to see if the fan is running normally, if not, you need to replace it with a new one.

Then check if the heatsink is in good contact with the CPU, if not, it is safe.

Then see if the hot silicone grease on the CPU is applied, whether it is evenly applied, if not, reapply it yourself.

See if the CPU is overclocked, and if so, downclock.

2. Re-plug the memory.

3. Hard disk failure: If the remaining space of the hard disk is too little and there are too many fragments, the machine is easy to crash when it is running. It is necessary to develop a good habit of regularly organizing your hard drive and removing junk files from your hard drive.

If the hard disk is aging or due to improper use of bad sectors and bad sectors, it is necessary to use the tool software to troubleshoot, and if the damage is serious, the hard disk can only be replaced.

4. Driver installation error: When some hardware such as the driver of the graphics card is installed incorrectly, it will suddenly crash with a blue screen or black screen when the system is booted into the desktop, check and delete the problematic driver.

5. Defects in application software: If you run this buggy software, the system may crash or not start normally, and you should find the latest version of the software or simply uninstall it.

6. Virus infection: Viruses and Trojans can cause a sharp decline in computer work efficiency and cause frequent crashes. At this time, we need to use anti-virus software such as KV3000, Kingsoft Antivirus, Rising and so on to conduct a comprehensive investigation and anti-virus.

Before you check for viruses, make sure that your antivirus software has an up-to-date virus database.

You can click on the "Upgrade" button to update it so that you can make sure that you can detect the latest viruses.

Cause 1: Crash caused by high hardware temperature.

For example, if the CPU or graphics card, hard disk and other hardware temperatures are too high to cause a crash, if you find that the computer crashes frequently, abnormal jamming, etc., you can first use relevant software to check the hardware temperature, such as Master Lu, AIDA64 software.

The normal boot temperature of the CPU is 30-50%, and if it is a large software or game, the normal temperature will be 60°C-80°C, and more than 80°C is on the high side. It is necessary to check whether the CPU radiator fan is stopped, whether there is too much dust and blockage, regular maintenance, such as computer cleaning, replacing CPU silicone grease, etc., or it may be that the CPU radiator is too poor to hold down the CPU.

The motherboard temperature is generally 30 to 60, and too high the motherboard temperature is usually a problem of too much dust.

The temperature of the hard disk is mainly around 50 or 60, and its operating temperature limit should be less than 70 degrees.

The normal temperature of the graphics card should be"30℃-85℃"Between them, more than 85 is too high.

Regarding the high temperature of the hardware, desktops can also add case fans to improve, and notebooks can add heat dissipation bases to improve.

Cause 2: The virtual memory setting is too small and causes the computer to crash.

If the virtual memory setting is too small, it will also cause a crash, and the system may also prompt you that the virtual memory is insufficient and you need to reset the virtual memory size. Set virtual memory to win10 as an example, first of all, we right-click "this computer", click "properties", click on advanced system settings, in the advanced tab interface of system properties, click "settings" in the performance column, in the performance options interface, click "change" in the virtual memory column, uncheck "automatically manage all drive paging file size, the best setting for virtual memory is (virtual memory is 2 times that of physical memory), for example, our computer uses 8GB memory, click" Custom size", we set the initial size of the virtual memory to 8000M (physical memory size), and the maximum value is 16000M (2 times the physical memory), and click the set button to confirm.

8.Counterfeit parts were applied, causing the computer to restart automatically. Counterfeit computer parts can cause the computer to freeze or restart. The solution is to replace the parts or reassemble a computer.

5.A hard drive failure causes the computer to restart automatically. Bad sectors on a computer's hard drive, or aging of a computer's hard drive, are common failures that can cause the device to get stuck and reboot while running.

The solution is to repair the computer hard drive at the same place where it is serviced, or to disassemble the computer hard drive.

After I pulled out the USB flash drive and restarted the car machine, the stuck problem was solved! Although the response of all functions is slightly slow, at least compared to the previous situation of infinite stuck, this is already a usable state. Won't get stuck.

In the end, in order to restore the problem 100%, with my consent, the engineer also took my USB flash drive of the root of all evil to go back to help solve the problem of infinite stuck.

Win10 taskbar is frequently stuck? The computer will inevitably become slower after a long time, but some friends' computers are stuck, and the taskbar is stuck, what is going on? Next, teach you a few tricks to solve the win10 taskbar frequent stuck!

In fact, for most of our friends who use computers, there must be no less encounters with the computer blue screen, the blue screen garbled code has not once made you fall into madness, want to solve the problem of computer blue screen, then our first step is to understand the cause of the computer blue screen, in order to better solve the problem of computer blue screen.

What is the reason for the computer to often blue screen and how to solve it? I believe that the vast majority of users have encountered the blue screen situation in the process of using the computer, if it is only once in a while, it is fine, but it is very annoying if it appears often, what can be done to solve it? Let's tell you the solution to the frequent blue screen of the computer.

The computer is always stuck and very still, and the most common is the jamming caused by too low configuration. There will also be this network difference. And there will be a bad system in this system. The first is to upgrade the configuration, and there will be no lag after the configuration.

There are many reasons for this:

The computer configuration is not working.

Excessive memory usage and too many running programs.

The computer is infected with a virus.

It is recommended to change computers, disinfect viruses or restore factory settings after backup.

Deeply clean the computer junk to see if the previous software has been uninstalled cleanly, if it still doesn't work, you can make a new system.

You can flash or change your computer.

Use the shortcut key Ctrl+Alt+Delete to open the Task Manager settings.

After opening the task manager, find the stuck program, and then click End Task to close the stuck program, and if you don't know that the program is stuck, end it all.

Or force shutdown, long press the power button to shut down the computer, and then restart the computer, you can press and hold the CTRL+Shift+ESC key at the same time to open the task manager, and then close the running software, after closing the problem, you can try to reinstall the system or ask a professional to repair.

If we use the computer a lot, we will find that the computer will be stuck, the mouse will not move, the new page cannot be opened, and the page we are looking at cannot be exited. It can only be taken to turn off the power and force it to shut down. Below I will teach you the solution to the computer that will freeze if it does not move for a while, for your reference.

Right-click on the job column and click "Work Administrator" in the pop-up box. You can also use the shortcut keys "Ctrl" + Alt "+Delete" to bring up the "Work Administrator".

Once you're in the "Job Manager", click on the first item "Apps".

In the list of executed programs, find the program that is not responding or is most affecting the computer's execution, and left-click on the program.

Once selected, click "End Task". This is the way you quit and you can continue to use your computer.

If you don't know which caused the card, you can click "Program", see the CPU or memory sorted in descending order, find the one that occupies a large amount of resources, click to select, and then click "End Program".

If you want to solve the problem by shutting down the computer, go to "Work Administrator" in the first step of this article, and then click "Shutdown" and "Close".