-
If you have a fully automatic washing machine, it is a proof that the washing machine is malfunctioning. If your washing machine is not fully automatic, the timer function is broken.
The fully automatic washing machine only needs to throw the clothes into the washing machine, turn on the switch, set the washing method, and you can wash and throw it according to the way you specify, and wait until the washing machine stops, just dry it. If it can't be stopped, it means that the timing function of the washing machine is damaged, which needs to go to the repair place for consultation and repair, **according to the actual damaged parts for pricing, find problems and, the repairer will give you the damaged parts, roughly**, etc., and then you need to negotiate with the repairer**, and then you can repair.
-
If you use a washing machine to wash clothes, the reason why you haven't finished washing after two hours may be: the washing time is set for a long time, and some wash slowly for two hours; If not, see if the washing machine is faulty, it is advisable to stop and try again to see if the same problem still occurs.
-
Why did it take two hours to wash clothes in a washing machine, and you set up a soaking function in the process of debugging, what do you write in the process of debugging, if you set up a soaking function, it may take about three hours to wash, so yes, sometimes the water inlet is slow, it may be determined according to some of your own water inlet speed.
-
Some functions are set to two hours or more. If the function is not set for such a long time and the laundry takes more than two hours, the washing machine is broken and should be repaired.
-
You take the laundry and take the washing machine to wash it in the sun for about an hour, if you want to use it for two hours, you can take your laundry at that time, you take the washing machine to wash, generally in about an hour, if you want to use two hours, that can, you are adjusting your time wrong.
-
If there is no problem with the setting, just check the water supply, it will be affected by the slow water supply.
-
You wash your clothes in the washing machine, and if they haven't been washed for more than two hours, that's the time you set, which is more than two hours.
-
You are talking about using a fully automatic washing machine, and the reason why you didn't finish washing is that there is a problem with the washing machine control program.
-
Look at the mode, and whether the door is closed tightly, I once also had a long time not finished washing the sound of dripping, as soon as the door was opened, it was not closed, and it did not start to wash at all.
-
The length of time it takes to wash clothes in a washing machine is based on the function you choose when you do your laundry.
-
You can check the mode you set first.
-
This is a very high-end washing machine in Korea, and there is a gear below to clean the washing machine, and the two hours are almost over.
-
I don't know if you've ever encountered such a situation......When I washed my clothes in the washing machine, it was clear that it was done in 20 minutes. After waiting for half an hour, you find that there are still 5 minutes left.
What's going on??? Let's find out with Xiaohu!
The time displayed at the time of laundry includes the time of water inlet and the time of drainage. In actual use, the time it takes to wash the laundry will be differentThe type of laundry placed, the amount of laundry, the water pressure, the drainage conditionsand other factors to shorten or lengthen.
The actual time is longer than the display time. The problem lies in the three processes of the washing machine:
Washing process
Factors that affect washing time are water pressure, water discharge, and the amount of laundry. The washing machine has its own detection program, which will detect the weight of the clothes inside, automatically adjust the washing time, and sometimes too much laundry detergent will cause the washing foam or the clothes will be unbalanced. The washing machine also adjusts automatically to make the washing time longer.
For example:
1.Too much foam
During the washing process, if there is too much foam and the laundry is unbalanced, the washing machine will automatically adjust the rinse and rinse. It also extends the laundry time.
2.Unbalanced clothing when dehydrated
The front-loading washing machine is equipped with a balance sensor that automatically detects the balance of the laundry during the dewatering process.
If there are too many or too few clothes and you can't adjust the balance of your clothes for a long time, it may lead to U13 errors. At this time, the clothes can be adjusted manually.
If the weight of the laundry is unbalanced and eccentric during the dehydration process, the washing machine will automatically adjust the distribution of the laundry through the inlet dehydration, so that the laundry is uniform and the laundry deviation is corrected. When the equilibrium state is reached, the machine will dehydrate at high speed.
Dewatering process
Since the washing machine flattens the clothes through water ingress and dehydration operations, the time of the washing machine becomes longer due to the unbalanced placement of the clothes. As the number of operations increases, so does the actual time. This can happen with too much or too little clothing.
Drying process
The washing machine adjusts the drying time according to the material and humidity of the clothes; Room temperature is also a factor that affects the change in drying time.
【Little Tiger Tips】
The displayed time is only a reference time, and the washing machine time is subject to the actual situation.
If the actual run time is much longer than the set time each time, Xiaohu suggests that you can try running a program with an empty cylinder to see if the time is basically the same. If the machine is idling, the time will also deviate from the set time.
It's all in [Xiamen Gome].
-
It cannot be left dry, it needs to be washed again, and once the washed laundry has been placed in the washing machine for more than 1 hour, it should be washed again.
When washing clothes, add water and detergent according to the amount of clothes and the degree of soiling, and set the washing time. Generally, the water should completely cover the clothes, the laundry detergent should be fully dissolved, and the washing time should be set at about 10 minutes.
It is best to use centralized washing, that is, all the same kind of clothes are washed together, which can save washing time and at the same time wash the clothes thoroughly. Washing your clothes with a low-foaming laundry detergent or detergent will keep your clothes cleaner and will prevent the detergent from sticking to the washing machine if it doesn't dissolve. Therefore, it is also very important to choose a good cleaning agent for the washing machine.
-
Summary. Hello dear, I'm glad to answer for you, why doesn't the washing machine wash until the last 9 minutes? A:
9 minutes left in the fully automatic washing machine? In this case, there are the following problems, the first problem may be a power outage, washing and washing suddenly power outage, the second situation will not be the washing machine washing and washing suddenly broken, and the second problem is to press the hand to see stop building, these kinds of problems are not, I think these are the cases.
Hello dear, I'm glad to answer for you, why doesn't the washing machine wash until the last 9 minutes? A: 9 minutes left after half washing in a fully automatic washing machine?
In this case, there are the following problems, the first problem may be a power outage, washing and washing suddenly power outage, the second situation will not be the washing machine washing and washing suddenly broken, and the second problem is to press the hand to see stop building, these kinds of problems are not, I think these are the cases.
Pro, 1. In this case, it may be due to the overheating of the washing machine motor caused by the external environment and excessive washing of clothes, and the motor thermal protector automatically disconnects the circuit to stop the washing machine from working. 2. In this case, please unplug the power plug first to see if the ventilation of the washing machine is not very good, or the ventilation hole at the bottom of the washing machine is blocked, and the heat dissipation is poor. 3. In this case, whether the laundry washed in the washing machine is excessive, if it is excessive, please take out part of the laundry before washing.
4. When the voltage is too high or too low, the washing machine may also have the above situation, and it is necessary to wait for the voltage to be normal before using the washing machine.
-
It is recommended to put in the laundry detergent and wash it again.
Because the temperature is still quite high, the high temperature and high humidity environment in the washing machine is easy to breed mold, on the one hand, it is easy to cause allergens, and on the other hand, the musty smell will also make people uncomfortable.
-
Summer and autumn are definitely not good, you need to wash again, winter should not be too much of a problem, but no one at home try not to wash clothes, after all, there are still safety hazards.
-
Don't get in the way, take it out and dry it directly. Because there is a certain temperature in the laundry process, the laundry detergent contains the effect of decontamination and sterilization, washes and dries at high speed, and finally cools slowly in the washing machine, so it is okay to leave it for a day. Usually people wash at night and wait the next morning.
At nine or ten o'clock, take out the one to dry.
-
It must be rewashed, and the clothes in the washing machine will have to be dried in half an hour, otherwise the bacteria will multiply a lot, which means that they are not washed, especially the underwear, and it will smell after a day.
-
Washing machines generally have a special rinsing program, which can be used to rinse the clothes again, of course, without adding laundry detergent. Wait for the garment to dry before drying.
-
It is best to wash it once, and then you can use it with an appointment function, make an appointment 24 hours a day, and dry it directly at home.
-
If it's summer, wash it again, and if it's autumn or winter, just dry it!
-
If the weather is humid, it is best to wash it again to prevent mold and smell.
-
It depends.
1. If the washing machine is with spin drying.
The drying function is very good, and the dao version can be directly taken out to dry it.
2. If the washing machine only has a washing function, then you can clean it again.
3. If the clothes feel a little smelly after taking them out, then rinse them again.
-
Look at the temperature and smell the smell.
If there is hot water in the washing machine, or touch the clothes to see if there are signs of fever, then it is very likely that the clothes are boring for too long, and this can only be done with clean water.
In addition, you can smell the clothes if they have a noticeable stuffy smell, and if so, re-pass the water.
Because some detergents will be exothermic in use, a certain amount of heat will make the clothes stuffy, and the washing machine is generally rolling or rotating, which is easy to knot or pile up. The heat cannot be dissipated, and the fibers and colors on the clothes are fermented by heat ......
-
If you leave it for a day, it is recommended to wash it again, and wash it simply.
-
It had to be washed again because there were too many bacteria left in the washing machine.
-
It is recommended to rinse it again, and keep it in the washing machine to suffocate it, as it may breed bacteria if you don't wash it.
-
I think it's better to rinse it again to reduce the risk of getting bacteria.
-
It is recommended to rinse again, and you can choose to rinse once.
-
No, after the clothes are washed, they can be placed directly on the balcony to dry.
-
Rinse at least once, after a certain period of time, bacteria will grow in it.
-
Check whether there is any peculiar smell under the clothes, if there is no peculiar smell normally, there is no need to wash it again!
My own experience: I usually wash clothes twice, the first time I use laundry detergent, soap powder, laundry detergent, etc., and the second time I put water to soak and pour gold spinning!!
-
It's shameful to waste, and if it's been washed, why bother to do it all over again for the sake of psychological problems, to dry.
-
First of all, it can be considered that the position of the drainage pipe of the washing machine is wrong, in actual life, sometimes the position of the drainage pipe is placed too high, or the drainage pipe is broken, which will cause the drainage pipe to be unable to go through the drainage program normally, and the washing machine can not be sensitive to normal dehydration. In this case, the best solution for users is to find a professional maintenance personnel to repair the washing machine's water pipe. 2. Too little laundry in the washing machine or the laundry in the washing machine is not flat, which will also cause the washing machine to not be able to dehydrate normally after washing.
Usually, this situation can be solved by itself, so users must pay more attention to the placement of clothes in the drum when using the washing machine. 3. After excluding the above two situations, if the washing machine is still not able to dehydrate normally, then it is likely that the internal parts of the washing machine have failed. In this case, the user is obviously not able to solve the problem by himself, so it is best to find a maintenance master from a local service organization to provide door-to-door service.
-
It is normal for the washing machine to be washed for 28 minutes, and the general cleaning of the drum washing machine is at least 30 minutes, and it will stop when the time is up. During these thirty minutes, the washing machine completes the normal process of washing, rinsing, and spinning. In the remaining two minutes.
The washing machine doesn't turn much until the last thirty minutes, when the reminder that the laundry is over will sound, and you can take it out to dry.
-
1. This situation may be caused by the overheating of the washing machine motor due to the external environment and excessive hail guide keys for washing clothes. The thermal protector of the motor automatically disconnects the circuit and stops the washing machine from working.
2. In this case, please unplug the power plug first to see if the position of the washing machine is not well ventilated, whether the ventilation hole at the bottom of the washing machine is blocked, and the heat dissipation is not good.
3. In this case, if the washing machine is too heavy, please take out a part of the clothes before washing.
4. When the voltage is too high or too low, the washing machine may also have the above situation, and you need to wait for the voltage to be normal before using the washing machine.
There is a knack for washing clothes in a washing machine, and there is no one to wash them cleanly. >>>More
Friend, this is simple, make a wooden base, do it according to the base of the washing machine, and when it is done, the washing machine will not be displaced when you put it on this base.
1. If there are obvious stains on the clothes, you can use laundry detergent to rub the stains and then put them in the washing machine for cleaning. >>>More
Using a washing machine to wash clothes, I don't feel that it will make the clothes old, because washing machines are invented by people to wash clothes. It's to make the clothes tidy and new. So I don't think washing clothes in the washing machine will make the clothes old, but only make the clothes cleaner.
According to the national three guarantees regulations, you have passed the return period, can not be returned, can only repair, unless it is the manufacturer can not be repaired can be replaced. >>>More