Where is the wifi frequency band set for Xiaomi mobile phones

If you don't have a computer, you can also set up a router through your mobile phone, so let's introduce it below.

Tools Raw materials.

Smartphone Xiaomi router.

Method steps.

1 13 step by step reading.

First of all, take a look at the router management address on the back of the router, as shown in the red box below.

Now open your phone's browser.

After opening, click on the address bar circled in red above.

After clicking, the interface as shown below appears, and the keyboard appears below to enter the address we see on the back of the router.

As shown below, after entering the address, click "Go" in the upper right corner

The interface as shown below opens, enter the management password below, and then click the forward key pointed by the red arrow.

The password is entered correctly, and the login is successful, as shown in the following figure. No need to remember passwords.

The first thing you see is the routing status by default, as shown in the following figure. At the top there is the "Common Settings" click.

The default setting is "WiFi Settings".

Can't see clearly, can be zoomed in. Place two fingers on the screen, then expand the distance between the two fingers. WiFi settings, you can change the name of the WiFi display, and the password used to connect to the WiFi.

See 1 image remaining.

Click on "Internet Settings" above, as shown below.

In the Internet settings, you can see that there are "Internet Access" and "Password". Home use is generally pppoe mode, use and password login. If the router is not "Internet set" for the first time, it will not be able to connect to the Internet.

If you change your broadband provider or password changes, you can set it here. This experience is introduced, thank you partners**!

Precautions. If this experience helped you a little, please vote below!

Phone Settings Set Router WiFi Settings Router WiFi Change Password.

Like and share. Read more

The Xiaomi wifi frequency band is currently two-in-one, no need to set it, if you want to turn off one of the frequency bands, you can also do it, open the Xiaomi wifiapp, click on the toolbox below, find the wifi settings and click to enter, find the frequency band you want to turn off.

Xiaomi router settings are mainly divided into three aspects: wifi settings, Internet settings, and security settings, and the specific operation steps are as follows:

Tools Ingredients: ASUS Tianxuan 2, Windows 10, browser.

1. Enter the address.

After opening the browser, enter it in the address bar to enter the login interface of the Xiaomi router.

2. Enter the administrator password.

After entering the administrator password, enter the main interface of the router and click on the common settings option above.

3. Switch dual frequency in one.

Turn on and off the wifi dual-band function according to the demand, and you can set the name of the wifi in the wifi setting interface below.

4. Change your password.

It is recommended to choose hybrid encryption for encryption, and then change the wifi password, and the wireless channel and frequency band bandwidth are usually automatic.

5. Set the signal strength.

The signal strength is recommended to be set to through the wall (the strongest), and the 5G and wifi settings are exactly the same, so I won't repeat them.

6. Choose a way to access the Internet.

Click on the Internet settings to select the Internet mode, the Internet access method is determined by the operator, you need to ask the operator, now the mainstream Internet access method is DHCP.

7. Set up a blacklist.

After clicking Security Center, you can set a blacklist in the wireless access control system, and devices that join the blacklist cannot access the wireless network.

8. Change the management password.

You can change the administrative password (the password you entered when logging in) by entering the original password and the new password in the Change Management Password field.

1. First find the "Settings" button in your phone, and then click to enter the settings button, as shown in the figure below.

2. After clicking to enter "Settings", find "WiFi" in "Common Settings", and then click to enter, as shown in the figure below.

3. If your mobile phone is equipped with a security guard, the following selection box will pop up, and then you can select "wifi" to enter, as shown in the figure below.

4. After entering the "wifi", then you can see the wifi you have connected, and then you can also click the "turn on wifi" button in the picture below, and then turn off the wifi, as shown in the figure below.

5. After turning off the wifi, you will disconnect the wifi, and you will not be able to see the wifi that can be used, as shown in the figure below.

The method of setting the wifi switch on the MIUI of the Xiaomi mobile phone: enter the phone's [Settings] - [Network and Connection] (the category name cannot be clicked) - [WLAN] - [Turn on WLAN] - Turn on Close - [Select the WLAN you want to connect to] - Enter the WLAN password - The connection is successful.

Method 1: Pull down the menu and click Wi-Fi to turn off.

Method 2: Click: Settings - Wi-Fi - Turn on Wi-Fi. Tap to cancel it to turn it off.

Method 3: Tap on airplane mode in the settings to turn off all data.

The wifi signal is relatively weak, you get close to the router and turn the wifi back on. If it's still like that, don't save the previous connection, search again, enter the password to try, and it's estimated that it's okay. Do not rule out the phone firmware problem, restore the factory settings to see.

Drop-down screen Press and hold Wifn and it will appear in the settings.

Cases like this are due to the reason of bad wifi signal.

Wifi requires you to have a wireless router around you or you can only use it under a wifi hotspot such as mobile telecommunications.

First, if you use a wireless router, you have to see if your wireless router settings have a password, if you have a password, you also have to set up the link password of your wireless router in Xiaomi, the setting method is: Settings - System - WLAN, find out your own wireless router, you choose to connect, if you need a password, you fill in your password, if you don't have DHCP enabled in the wireless router, you have to click on your wireless router name, click and select Settings, Fill in the IP address, gateway, mask, and the nameserver is your DNS. If the wireless router enables DHCP, you don't need to fill in those IPs and the like.,That can be obtained by yourself.,But sometimes enabling DHCP will make the phone unable to connect to the Internet.,That's what I'm like.,So you need to not enable DHCP.。

Second,If you use mobile telecommunications in public placeswifi,Those generally have passwords,In this case, you need to use Xiaomi's built-in browser to go online,At this time, there will be a call for you to fill in a password or something like that,You can go online after you fill in the account password or the like according to the interface,Otherwise, you go to Xiaomi's WLAN settings,He will keep writing to save or get an IP or the like,If you use UC,Sometimes there is not necessarily an interface such as filling in the password。

Enter it in the browser address bar first, and that's what the exit setting is generally about, as long as you haven't changed it.

Please click Enter a description.

If you have already set a password, enter the password to enter the page, and if you have not entered the password, it will pop up directly to the homepage for setting.

Please click Enter a description.

After entering, we must first set a password, click on the top of the commonly used settings of the tab of the bend, and look below after entering.

Please click Enter a description.

Then select Security Center in the secondary tab column, where you can change and add passwords.

Please click Enter a description.

After that, enter the password below, remember to click Save, and then you need to restart the router, and come in again.

Please click Enter a description.

Then click on the upper right corner, where you can modify the router name and set a recognizable name for your router. Then go online with peace of mind!

Please click Enter a description.

Please click Enter a description.

You click on the settings, and you will see the WLAN settings when you go in, and this is it. The wifi you link to is all inside, and you can also add it manually.

Mi wifi mobile client is a wifi management tool, the computer with xiaomi wifi can be wirelessly connected with the mobile phone with xiaomi wifi mobile phone client, to achieve three very practical functions! File transfer, ppt**, control computer shutdown lock. Let's talk about how to set up the Xiaomi wifi mobile phone client.

1. After the installation is completed, you will be prompted to install the mobile terminal. If you have installed the Mi WiFi client on your computer before. You can directly use your mobile phone to search for Xiaomi wifi**. The logos are as follows.

2. Click Mi WiFi (on) on the computer. Find the phone you're connected to.

3. Click the button on the right, drop down the menu, and check Allow remote shutdown.