-
Anonymous users2024-02-06Let me tell you first.
It's not a problem with your machine.
Many people have this kind of problem with their computers.
It's not a matter of the configuration of the machine itself, follow the following method.
It should be no problem1、Adjust the screen resolution to the resolution of the current desktop,If your book is1024x768, adjust it to1024x768,Mine is1280x800;
2. Tick off the "hardware pointer" is not enabled;
3. Tick off the "window mode" and do not enable the window mode (whether it is the maximized window mode or the original window mode, it is not enabled!) ）
4. Tick off "Use UI Scaling" and don't enable it;
5. Since the graphics card for 9200 is not very good for World of Warcraft, so in order to save resources, adjust the "world appearance", but adjust the "spell details" to medium and upper, the reason is very simple, adjust the ice ring too low, and the dedication can not be seen clearly! , "Special Effects" and "Others" are not enabled!
6. When you don't read the progress bar, you can restore the above options appropriately, especially the "hardware pointer - correction delay" is best opened, otherwise the mouse will be meaty, I can't describe it, just try it.
-
Anonymous users2024-02-05Hello, black screen. Reason:
Damaged monitors, damaged motherboards, damaged graphics cards, graphics cards.
Poor contact. The power supply is damaged, the CPU is damaged, the temperature of the components is too high, etc.
Microsoft Genuine Verification.
The computer enters the Trojan and the graphics card is driven.
Incompatible or crashed.
Solution: Eliminate the above causes one by one and find out the causes for resolution.
See the references for more detailed reasons, and you can ask questions if you have them.
-
Anonymous users2024-02-04Abnormal!
ZD one-click U disk system software and tutorials.
Hurry up and reload. Break a leg!
-
Anonymous users2024-02-03It's not normal, let's install a new system.
-
Anonymous users2024-02-02Hello, here's how to fix the black screen when your computer boots up:
1。Try to boot the computer, after the computer brand is out, press F8, press Enter, Enter, enter the safe mode, and start advanced.
Guess the item before choosing, configure it correctly for the last time, press enter, press enter, and try it!
2。No more, enter the safe mode, start normally, press enter, and after you get to the desktop, you can kill the virus completely!
After restarting, click on "File Recovery", select all, and delete the files completely!
4。Unplug the graphics card and memory module, erase it, use a brush, clean the slot dust and fan, replace the memory slot, etc.!
6。If you still can't turn it on, you need to "one-click restore" or "reinstall the system"!
7。If there is a problem with the hardware, send it for repair!
-
Anonymous users2024-02-01The computer card is divided into several different situations,It may be a virus,Or there is too much garbage in the system,It may also be affected by third-party plug-ins,Use Tencent PC Manager to scan if you find a virus,Remove it strongly,If there is no virus,Eliminate the system garbage on the line,And this function is very powerful,So that the general electric hunger brain will be restored,There is no so pie flutter card,And set the boot startup item,Don't too much, This can also eliminate the situation of dust and defeat the card, and it is best to blow the host for a while, remember to use cold air to blow, which can speed up the operation of the computer.
-
Anonymous users2024-01-31Generally, it is due to the accumulation of garbage and files that are too much for the computer to use for a long time, and occupy memory.
There are also some junk software, plug-ins or something, which will also slow down the boot speed of the computer.
2. Delete some redundant software, there are many software that come with boot but we don't need it, you can use the software uninstall function of PC Manager to uninstall.
3. Reduce some unnecessary boot items, which are in the computer acceleration function.
4. Maintain good habits of using computers, and often conduct computer physical examinations through Zhendong!
Hope your PC is getting faster!
It is very likely that it is overheating protection (
When the CPU reaches the preset protection temperature of the motherboard, the motherboard will automatically power off) Silicone plays a role in improving heat dissipation >>>More
First of all, let's correct it: the CPU rotation is wrong, to say that the CPU fan is rotating. If the CPU is transferred, it will be troublesome, and the following questions are: >>>More
The oil should be wiped, but not the main thing, the main thing is to see if the cable in the case is too close to the fan, rearrange it, sometimes the line is too close, and the fan will have noise after the start-up time.
1. Poisoning 2. Too much software.
3. Software Conflicts. >>>More
Personally, I think this is the sound of the brake caliper colliding with the bracket when reversing. Because the brake caliper will be subjected to a forward force because of the wheel inertia when driving forward and braking, and the brake caliper will be subjected to a force that goes backward and upward when reversing, the brake caliper and the bracket of the vehicle are generally floating links, there is a certain activity clearance, after you drive forward for a period of time and brake, the caliper will move forward a little from the normal position because of the force, and at this time the reversing brake caliper will be dragged to the rear, one before and one after the other makes this distance longer, so the sound of hitting the bracket is louder. At this point, the brake calipers are already in the rear position, and there is no longer a crashing sound due to the large moving gap. >>>More