The computer keeps turning in circles when it starts up, and the laptop keeps turning in circles whe

Part 1: Computer System Built-in Disk Repair Tutorial:

After selecting the drive letter in my computer, right-click to select Properties, select "Tools Start Checking" in the pop-up drive properties window, and select "Automatically Repair File System Errors" and "Scan and Recover Bad Sectors", and then click Start, the scanning time will vary depending on the disk capacity and scanning options (after doing it according to the above method, a box will pop up, the point is, Auto shutdown and repair at boot, win7 select the Disk Check button according to the plan). Bad sectors on the hard drive can lead to corruption or loss of computer system files, computer failure to boot or freeze (computer stuck in booting windows, which is likely to be caused by this). Hard disk bad sectors can be repaired using NDD Disk Utility or Scandisk.

If the fault persists, restore the computer system or reinstall the system (it is still not possible to format the hard disk and repartition and reinstall it, if it doesn't work, you have to replace the hard disk, or overhaul it).

Second, the steps. 1. Click "Attachments ->System Tools" in the "Start" menu, and then click "Disk Defragmenter" under the subfolder to open.

2. After opening the program, select the C drive, and then click the "Disk Defragmentation" button to analyze and organize the disk fragments of the C drive, as shown in the figure. After the decluttering is completed, you can fragment the other disks here in the same way.

3. When there are too many programs running in the computer, performing the shutdown operation will make the shutdown very slow, you can close all the running programs, and then click the start menu "shutdown" operation.

4. You can shorten the waiting time for the program to be automatically closed after shutting down. Click the "Start" button to open the "Run" program, or you can use the key combination Win+R to open it, as shown in the figure.

5. After opening, enter "regedit" in the text box, and then click the "OK" button to open the registry and locate the Control PanelDesktop node.

6. Find the waittokillapptimeout key on the right side, then double-click this key, and enter the numeric data as 3000 in the pop-up form, that is, the waiting time for closing the program is 3000 milliseconds, that is, 3 seconds.

The above,It's the solution to the problem that the computer can't get into the system after it starts up,Do you know how to deal with this problem of not being able to enter the interface? We can deal with this problem by reinstalling a system, or we can operate by entering the computer's system in safe mode, and we can restore the computer's system to a relatively earlier point in time, and that's it. But it may also be because the hard disk is broken, and we can also solve this problem by replacing the hard disk.

The computer keeps showing the rotation when it is turned on? Ever wondered if it's a problem with the hard drive.

Laptop boot keeps spinning in circles and solutions:

1. The computer is installed with malware, or malicious programs are generated when surfing the Internet.

Solution: Use anti-virus software such as 360 Guardian and Kingsoft Guardian to clean up garbage, check and kill malware, and restart the computer after completion, and it will be solved. If it doesn't work, reinstall the system and restore the system, which can solve the problems caused by the software.

2. Just run individual software, or the game appears occasionally.

3. Computer poisoning, unstable software installed, etc.

Solution: Take a full antivirus, uninstall the software that caused the problem, and reinstall another version, which may solve the problem. If it doesn't work again, reinstall the system.

4. Dust enters the memory module in the computer case.

Solution: Disassemble the chassis, remove the memory module, clean the memory gold finger, and reinstall it.

5. The memory of the computer is bad after a long time, the parallel memory is bought, and the multiple memories are incompatible when used together.

Workaround: Replace the memory.

Compared with desktops, laptops have a similar structure (monitor, keyboard and mouse, CPU, memory and hard disk), but the advantages of laptops are still very obvious, and their main advantages are small size, light weight, and easy to carry.

Portability is the biggest advantage of notebooks compared to desktop computers, the weight of general laptops is only about 2 kg, whether you go out for work or travel, you can carry it with you, which is very convenient.

Laptop care.

Hard disk

1. Try to use it in a stable condition and avoid operating the computer in a place that is easy to shake.

2. The power-off process is the most vulnerable time for hard disks. At this time, the speed of the hard disk bearing has not yet been stabilized, and if there is vibration, it is easy to cause bad rail. Therefore, it is recommended to turn off the laptop and wait for about 10 seconds before moving the laptop.

3. Perform disk reorganization and scanning once a month on average to improve disk access efficiency.

Floppy drive

1. Avoid using floppy disks with poor appearance or mold.

2. Purchase a floppy drive cleaning tablet and clean the reading and writing head regularly. Optical drive (CD-ROM).

3. Use the disc cleaning tablet to clean the laser reading head regularly.

4. Please put the disc into the CD drive with both hands, hold the CD tray with one hand, and fix the CD with the other hand to avoid the deformation of the CD tray.

Touchpad

1. When using the trackpad, please be sure to keep your hands clean to avoid the occurrence of cursor running around.

2. When you accidentally stain the surface, you can gently wipe the surface of the touchpad with a dry cloth wetted corner, and do not use rough cloth and other items to wipe the surface.

3. The touchpad is an inductive precision electronic component, please do not use sharp objects to write on the touch panel, and do not use it under heavy pressure to avoid damage.

If it is stuck for too long, it is recommended to press and hold the power on button until the power is off.

If you still can't get into the system after rebooting, it is recommended to use the automatic repair feature, which can detect and resolve some system problems and prevent Windows from starting.

To run automatic repair, follow these steps:

Boot to WinRE (Windows Recovery Environment), which can be understood as recovery mode.

You can press and hold the power on button until the machine is powered off, then turn it on again, and then power off again, repeat 3-5 times until you enter the recovery mode as shown below.

From the Select options screen, tap or click Troubleshoot.

Tap or click Advanced options, and then tap or click Automatic repair.

Auto-Repair will launch and attempt to fix Windows to prevent loading.

If the above still doesn't work, try restoring the system, or reinstalling the system.

Answer: Hello, the laptop has been turning around and can't enter the system, generally because the system or drivers have been updated, and the installed software has compatibility problems, which can be solved by automatically repairing and entering the safe mode to uninstall the update or driver.

Ask how to get it.

If it can't be repaired automatically, click Advanced Options, select Troubleshooter, click Advanced Options in Troubleshooting, click Launch Settings in Advanced Options, then click Restart, and then select Enter Safe Mode after starting again, here select Enable Safe Mode, and then enter Safe Mode.

I didn't respond to the question.

<> asked, no matter if the key was still spinning in circles.

Answer: Restart the computer in the current state or press the host restart key, or press and hold the power button to force shutdown and then reboot, if there is no longer an error prompt and can enter the system operation normally, it means that the last abnormal is only an occasional program or system running error, it does not matter.

The question kept pressing to restart the power, but it didn't respond, and it was still spinning in circles.

You can press and hold the power button to force it to shut down, and then wait for 10 minutes to restart, if it still can't be opened, the system is broken, and the system needs to be reinstalled.

<> pro

Hello, I'm glad to answer for you. There are several possibilities for the computer to restart and keep spinning, here are a few solutions to deal with this problem:1

Check whether it is caused by a system update. If the system is being updated when the computer restarts, please wait patiently and do not force the computer to shut down or cut off the power when you are bored. If the update takes too long, you can try to fix it after entering safe mode.

2.Try entering safe mode. Restart the computer and press the F8 key to enter the advanced options interface, choose to turn on "Safe Mode" or "Safe Mode + Network", and then restart.

If you successfully enter safe mode, the problem may be due to a third-party driver or software, and you can troubleshoot and fix it accordingly. 3.Repair the operating system.

Corrupted system files can be recovered using the repair tools that come with the Windows system, such as System Restore, System Image Repair, etc. It is also possible to use a Windows installation disk or a USB flash drive for system repair. 4.

Check for hardware failures. If the above methods do not work, consider further checking for hardware faults, such as loose memory module sockets or hard disk failures.

The solution to the problem that the computer reboot keeps going in circles: 1. It may be caused by the incompatibility of some programs or hardware drivers. After turning on the computer, I see the windows10 logo, and there is a circle under it when it is turning, count 5 seconds.

Then press the power button directly to power off. For desktops, if there is a "restart button" on the case, you can also press the restart button directly, but some users may need to disconnect the power supply directly. 2. Repeat this 2 3 times, and when you turn it on again, you will enter the blue screen recovery page.

3. Click the lower right corner of the mouse to view advanced repair options, you can enter the RE mode of win10. In the troubleshooting in the RE mode of win10, you can "reset this computer" or "go back to the previous system". 4. You can choose to reset this computer, reinstall the Windows 10 system automatically, and you can choose whether to keep the existing software, applications and data.

You can also choose to go back to the previous system, through the "upgrade" or Hengxiao way, install win10, you can directly return to the system before the upgrade. For example, if you upgrade from win7 to win10, you can choose to try to reinstall win10 to solve the current failure, or give up win10 and return to the original system.