Why does the indicator light stay on after the Huawei Honor 6 enters the water?

We are sorry to hear this, and in order to reduce your losses, we recommend that you deal with it as follows:

1. Please try to place your phone in a dry and ventilated place and use a paper towel to blot the water stains on the surface of your phone.

2. If the phone is turned on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

3. Please take out the SIM card and microSD card.

4. Take your phone to a Huawei customer service center as soon as possible to avoid unnecessary losses.

Precautions: 1. Do not move or shake the mobile phone frequently after entering the water, so as to avoid the spread of moisture inside the mobile phone.

2. Do not bake with a hair dryer or stove after entering the water, so as to avoid the liquid being blown into the inside of the mobile phone and damaging the mobile phone at high temperature.

3. Some mobile phones can be turned on and used normally after simple treatment, but the mobile phone is composed of precision electronic components, and there is a hidden risk after water ingress, so it is recommended not to try to turn it on.

The phone is not broken. The indicator light is working normally, representing the battery level and event reminders.

Repair steps after water ingress.

1. First of all, of course, the whole machine should be disassembled, and the corresponding screwdriver should be prepared before that.

2. When removing the screen, pay attention to gently separating the chiplet connected to the motherboard from the motherboard.

3. Before removing the metal shielding isolation layer, tear off the network access card and the card slot sticker under the network access card.

4. The last is to take a hair dryer to dry, but don't blow on the screen for a long time, such a high temperature will destroy the screen, even if the screen has a watermark, you can use the phone normally, the water in the screen will generally dry in two days, and you will see that the watermark inside is getting smaller and smaller.

5. Blow the front and back of the motherboard to ensure that there is no moisture residue, and try to blow out the water at the earpiece and buttons.

For hardware failures caused by water ingress, Qianyan recommends that you directly contact the manufacturer's after-sales service for inspection and repair.

Causes of malfunction when water enters the phone:

1) Impurities and corrosives make the oxygen index of the mobile phone motherboard modified and broken.

When the mobile phone enters the water, on the one hand, there may be a variety of impurities, dirt and electrolytes accumulated in the water, resulting in the fouling of the circuit board, which may lead to the failure of the circuit, and the electrode is easy to cause the integrated circuit and power supply circuit on the circuit board of the mobile phone to fail. The mobile phone burns the power amplifier, CPU, and power supply IC, and the line is broken and the wiring part is oxidized.

2) Change the parameters of capacitance, inductance, and resistance. When the water of the incoming mobile phone volatilizes, a variety of impurities and electrolytes may be left on the circuit board, which will directly change the distribution parameters of the circuit board during design, resulting in a decrease in performance and indicators. Samsung's small components such as resistors and capacitors are also the most susceptible to corrosion.

3) The electrolyte of sewage short-circuits the mobile phone, and powering up will produce software failures. If the mobile phone is flooded, the user or repairer does not completely dry the water without powering on the test phone. The high current of the mobile phone after powering up may burn out the components, and the short circuit will also cause the data of the mobile phone to be disordered.

Don't turn it on, it is easy to cause a short circuit if the machine is forced to start after the machine enters the water, and it will take more than 1,000 to change the motherboard when the time comes, which is not worth it.

As soon as possible, go to an after-sales repair point or a random place to repair your phone and find someone to remove the shell of the Honor 7, if you have a special-shaped screwdriver, you can also disassemble it yourself.

First of all, the finger card slot is withdrawn, the screw is in the card slot, just one, and the back cover can be buckled off with a fingernail after removal.

Generally, maintenance personnel will use a hair dryer to dry the phone.

Then clean up the motherboard and try to boot it.

If you can turn on everything, if you can't turn it on, then you have to put it in the store to check the problem.

Finally, it is recommended that you go to Huawei's after-sales repair point to do these things, during the warranty period, step 2 and 3 fiber elimination is free.

In short, don't turn on the machine, go to repair and destroy the back cover quickly, disassemble it early and dry it early to prevent greater damage.

Huawei Honor 6 If water enters, don't continue to turn on the phone, turn it off as soon as possible, and then dry the fuselage, don't shake the phone, so as not to cause water inside the fuselage to cause a larger impact area. Then send it to dismantle and repair, and it can be thoroughly cleaned after disassembly, so as to avoid short circuits caused by live operation.

1.Shut down in time.

The reason why people are worried about the mobile phone falling into the water is that after the water enters the mobile phone, the motherboard of the mobile phone will be burned out, so that various faults and problems will occur. Therefore, at the moment when the mobile phone falls into the water, it is necessary to take the mobile phone out of the water at the fastest speed in your life, and then if the mobile phone is still on, you must turn it off immediately.

2.Wipe dry.

After turning off the phone, use a towel or paper towel or other tools that can absorb water to dry the water on the surface of the phone, and as for the headphone jack and charging hole, you can use a small cotton swab to absorb water. It is best not to use the hot air of the hair dryer to blow directly at the mobile phone, as the high temperature can easily damage the internal parts of the mobile phone.

3.Send it for repair.

After a simple "care" of the phone, the fastest and safest way to send it to the repair shop for repair, because the shorter the time of water ingress, the least chance of damage to the phone. Of course, there are many users who are reluctant to pay for this repair, and decide to use it directly after simple treatment, if you are lucky, the water does not enter the phone, but on its surface then there is no problem. But if you're unlucky, then you might get your phone scrapped, and it's up to you to choose.

If the phone is scrapped, then you have to buy a new one.

Blow it down with a hair dryer, and if it doesn't work, go for a warranty

Don't switch back and forth and wait for it to dry.

The red light is always on, which alarms and indicates that the power supply is not cut off and is in a dangerous state. Turn off the power and cut off the power, and it will naturally go out.

1. How to save yourself after the Huawei phone is flooded:

Once you have rescued your phone from the water, remove the battery as quickly as possible.

Take out the SIM card of your phone, shake the water in your phone vigorously or use a paper towel to absorb it.

Find a hair dryer and use cold air for an hour or two, then use an electric fan for a day and a night, and then put it in a ventilated and dry place for a day and a night.

2. Specific introduction of Huawei mobile phone: Huawei mobile phone is a medium-sized mobile phone manufacturer in China, with a huge human resources department, mobile phone products and sales integration, and Huawei mobile phone is at a low price, which is easier to enter the public life. In 2015, Huawei was selected as one of the top 100 most valuable brands in the world by Brand Z, ranking 16th among brands in the technology field.

3. The development status of Huawei's mobile phones: As of 2015, Huawei's products and services have spread to more than 170 countries, serving 13 people around the world, and 16 R&D centers have been set up in China, Russia, Germany, Sweden, India, and the United States. The consumer business is one of Huawei's three major businesses, and its products cover mobile phones, mobile broadband, and home terminals.

Huawei's consumer business will adhere to the boutique strategy, and its current product lineup includes the Mate series, the P-series, the G-series, and the Enjoyment series.