What is a diamond wire saw machine and what is a diamond wire saw?

The wire saw machine is basically composed of four basic components, namely the chassis, the large motor, the small motor, and the control box. The large motor is the cutting motor, which is responsible for driving the wire saw to rotate and friction cutting, and the small motor is also the walking motor or the rope retraction motor, which is responsible for dragging the rope to complete the cutting operation. The control box is responsible for regulating and directing the speed of the large and small motors.

If it is to cut concrete, it is a reinforced concrete wall sawing machine, which is widely used in the demolition and cutting works of concrete buildings. Cutting of bridges and support beams. Shenzhen Hanpeng Technology is a professional manufacturer specializing in the production of hydraulic concrete wall saws and wire saws.

You can check it out.

Cutting equipment (carrier) for mounting diamond wire saws.

The diamond wire saw mainly passes through a flexible wire rope with a length of 50 meters or 100 meters, this wire rope has strong tensile resistance, is not easy to break, and the wire rope increases the tensile value through continuous winding, on the outside of the wire rope, the processed annular diamond beads are fixed through rubber, plastic, springs and other materials at the same spacing, and the final diamond wire saw is composed of three parts of the wire rope, beads, and connecting materials to form a whole, and the final product is called a diamond wire saw.

Diamond wire saws are mainly composed of: flexible wire rope, diamond beads, springs, and rubber. The flexible wire rope plays a role in connecting and increasing the tension of the left and right, and the annular diamond beads are installed at the same distance on the wire rope, the diamond beads are responsible for the cutting friction in the work, and the springs and rubber play a reinforcing role, so that the diamond beads will not be loosened, and the diamond wire saw generally has 40 beads per meter, which is divided into the following according to the degree of sharpness

Wear-resistant, sharp, and comprehensive. According to the use, it can also be divided into: cutting steel-concrete comprehensive type, cutting stone special type, etc.

Diamond wire saws weigh approximately per meter.

Diamond wire saw is a cutting and demolition tool for mines, blocks, curved plates, large slabs of stone, thick concrete, irregular concrete reinforcement, bridges and roads, etc. It is easy to install, flexible to use, horizontal and vertical cutting. The following can learn about the composition of the equipment structure and the types of wire saws.

It is a hydraulically driven power unit cutting equipment that can achieve a variety of cuts for thicker concrete. It is the most suitable cutting construction equipment for cutting, dismantling, and repairing basements, chimneys, and pillars. Wire saws (wire saws) are capable of working on close-packed reinforced concrete structures, thick brick walls, and even underwater cutting.

Wire saws (wire saws) can meet cutting depths that hydraulic wall saws can't reach.

Diamond rope.

The price point is around 200 to 300.

Diamond wire saws.

There are all kinds of prices, and imported ones are expensive. Generally, it costs seventy or eighty thousand.

I have a friend who uses Jiande's wire saw, they are the manufacturer**, quite affordable, and the quality is also very good, it is said to be 260 a meter.

You can search for it online.

Wire saws and row saws are used to cut stones, according to the cutting object is generally divided into four series, such as concrete, marble, granite, and heterosexual, which is a kind of saw, theoretically speaking, if you cooperate with enough mechanical devices and long enough diamond wire saws, you can completely cut the earth into two equal halves, because the diamond contained in the beads above the wire saw is the hardest substance in nature, and can cut any material.

Compared with the traditional saw blade, the concrete diamond wire saw is not limited by the size of the building, and can be cut in any direction, such as cross-cutting, vertical, diagonal direction, etc., getting rid of construction vibration, noise, dust and other environmental problems, with extremely high efficiency, and can be controlled from a distance for underwater cutting;

The use of marble diamond wire saw is very wide, and now most of the world's marble mines are mined by diamond wire saw technology, which has a qualitative leap compared with the traditional method, not only protects the environment, but also achieves maximum savings in the use of resources. At present, there are still some rare stones in China that are mined by the first method, which not only has a great impact on the environment, but also is a great waste of precious resources. This kind of rope is usually fixed with springs, and two vertical holes are drilled in the horizontal or vertical direction to thread the rope, and then cut by mechanical drive, which can be cut to different sizes according to actual needs, representing a trend of mining in the future.

The use of granite diamond wire saw is similar to that of marble diamond wire saw, but the diamond beads on the granite series contain diamond quality is better, ** high, so the cost is higher. At present, there are more and more wire saw cutting processes used in granite mining, which can greatly reduce waste, and is safer and more efficient, although the purchase cost is higher, but in the long run, the comprehensive cost is far lower than the cost generated by the traditional ** method. The special-shaped diamond wire saw can be formulated according to the special requirements of customers, mainly for the sawing tasks that cannot be completed by other sawing tools such as diamond saw blades for processing, generally stone products with larger diameter or larger volume.

Due to the special performance of the wire saw, a new type of tool with great market prospects, is a miniature wire saw, the industry name is "diamond wire saw", the diameter of the wire saw can be done, he can process high-precision circuit board trunking, and there is no burr, the accuracy is very high, not limited by the size of the workpiece. This is a new type of tool that will play an unimaginable role in the future in the circuit board, electrical appliances and other industries.

Shanghai Zongsen wire sawing machine and road cutting machine are of good quality, many years old brand, quality assurance. For more information, please contact VX: 15017880890

The main products are intelligent diamond wire saws, intelligent remote control wire saws, electric remote control wire saws, electric rack wire saws, electric chain wire saws, electric road cutting machines, diamond string ropes, wall cutting machines, mining wire saws, diesel road cutting machines, pile cutters, bilateral road cutting machines, saw blades, steel tongs, hydraulic pumps and other professional demolition and cutting machine equipment manufacturers.

1. Diamond chain saw, also known as concrete chain saw, concrete cutting machine.

As a concrete cutting machine with a large cutting depth, diamond chain saw is suitable for irregular cutting of concrete (including fine steel bars) and brick surfaces, such as: wall opening, cement pipe cutting, building demolition, house renovation, ground trimming and other on-site mobile operations.

2. Product features:

Gasoline internal combustion power, need to be cut with water, mainly for concrete blocks and red bricks, easy to carry and maintain.

It is suitable for irregular cutting of concrete (including fine steel bars) and brick surfaces, such as: wall opening, cement pipe cutting, building demolition, house renovation, ground trimming and other on-site mobile operations.

The mixing ratio of high-quality gasoline to engine oil is required to be no less than 40:1.

3. Product parameters:

Model 633GC engine air-cooled two-stroke;

Power kW mailbox capacity 1L;

Displacement 101 cc maximum cutting depth 400mm;

Can be equipped with chain plate 16"Chain speed 25 m s ;

Noise 102 db weight kg.

Forming presses, sintering equipment, polishing machines, cutting machines, welding machines, etc., as well as related testing equipment.

Automatic presses, sintering furnaces, cutting machines, etc.

First of all, there are people, electricity, machines, diamonds, substrates, powders and other equipment.

Founded in 1992, Zhengzhou Songshan Abrasives is a professional manufacturer of diamond tools, located in Zhengzhou, the hinterland of the Central Plains, with convenient transportation and developed diamond industry, which is an enterprise approved and registered by relevant state departments. Songshan brand and "Hengrui brand" 150mm road engraving blade, 180mm road slotting blade, 350 road cutting blade, 400mm road saw blade, 400mm slotted blade, 500mm diamond saw blade, 600mm diamond saw blade, 700mm wall saw blade, 800mm diamond wall saw blade, 1000mm diamond wall saw blade, 1200 diamond wall saw blade Round diamond grinding block, special-shaped diamond grinding block, terrazzo grinding block!

Diamond saw blade is a cutting tool, which is currently the hardest substance, and it is widely used in many industries. In the use of the market, it has a greater advantage in use, and compared with other similar products, it can be more favored by users. At present, there are four main processing methods for diamond tools, namely thin film coating, thick film diamond welding, diamond sintering and single crystal.

Different machining methods produce different types of tools and play different roles when used. It is capable of cutting a wide range of different substances, even if the material being cut is hard, it will not have any effect on it, and it can also complete the cutting job.

Diamond saw blade has a variety of different classifications, according to the process division, it can be divided into sintered type, welded type and electroplating type, but due to the serious pollution of electroplated diamond saw blade, therefore, the current production of this product in the market has been very small. Most of the products sold in the market are sintered and welded.