Mercedes Benz s tire pressure warning light is gone

The tire pressure detector or receiving template is malfunctioning. This situation is relatively rare, and the general tire pressure monitor has a good durability, and the life span can basically be the same as the life of the vehicle. However, sometimes there may be signal interference, which can cause false alarms in the tire pressure monitor.

The car quickly pressed over the uneven road surface. At this time, the air pressure inside the tire will increase after hitting the tire at high speed, especially when driving on the road in summer, the thermal expansion and contraction of the air will lead to the possibility of tire pressure alarm.

Mercedes-Benz tire pressure precautions.

It should be noted that the Mercedes-Benz E-Class is equipped with tire pressure monitors, and the wheels of the car will also be equipped with sensors that can monitor the tire pressure of four tires. Instructions for use of the monitor: The tire pressure monitor warns you when one or more tires have a drop in pressure.

The tire pressure monitor will only work if the corresponding sensors are installed on all wheels.

Note that the tire pressure is displayed on the multi-function display, and after a few minutes of driving, the current tire pressure for each tyre is displayed in the service menu of the multi-function display.

Hello dear, happy to answer for you!! It is divided into two situations: one is that while driving, the tire pressure warning light suddenly turns on; Another is to light up for a long time after starting the vehicle.

1. When the vehicle starts, the indicator lights on the dashboard will light up a lot, this is because of the inspection work after the power on, when the car engine starts, under normal circumstances, the indicator lights on the dashboard will be extinguished (except for the handbrake). If the tire pressure warning light is not turned off for a long time, it means that there is a problem with the tire pressure of the car. At this time, the tire pressure should be checked first and inflated in time.

Wait until the car's tire pressure warning light goes off before traveling. 2. When the tire pressure warning light suddenly turns on during driving, first of all, keep calm, don't panic, immediately reduce the speed of the vehicle and avoid hitting the steering wheel and braking sharply (to prevent the rear car from rear-end), stop on the side of the road under the premise of ensuring safety, and check the tires. If the tire pressure does not decrease a lot, it can continue to drive if it remains above first; If the tire pressure has dropped to below, change the spare tire first.

If you can't solve it yourself, you have to contact a 4S shop or car repair shop to find a tow truck to tow away. Insufficient tire pressure will cause the four wheels to be of different heights, resulting in abnormal tire wear or vehicle deviation during driving, so it is necessary to inflate in time if there is a situation, and do not force to continue driving, otherwise it is very easy to have an accident. If the tire pressure alarm, but the tire pressure is not abnormal, then the riders can ignore it.

Have a great day!

YesTire pressureFalse alarms from sensors, at which point resetting the vehicle's tire pressure monitoring system can be resolved.

It is necessary to check whether the tires are normal, if there is nothing wrong with the tires, it is usually caused by a faulty tire pressure sensor or a lack of reset tire pressure settings. If it is caused by the failure to reset the tire pressure setting, you can go to a professional institution to reset it, if it is caused by the failure of the tire pressure sensor, it can be solved by replacing the sensor.

If you are driving, you should slow down your speed first, and when you stop, you should observe the vehicles behind you and stop when it is safe to do so. Then turn off the engine, restart the vehicle after a few minutes, look at the tire pressure value, if the tire pressure is too high or insufficient, you can adjust it yourself in the same place or find a professional to adjust.

Experts recommend that it is most appropriate to reduce the tire pressure by about 10% in summer.

When the high temperature hits in summer, the road surface temperature rises, and the tire pressure is easy to rise, and once the tire pressure is too high, it is easy to accelerate the tire wear, which causes a puncture. But many car owners don't know that over-lowering the tire pressure can sometimes be even more dangerous than over-pressurizing. Once the tire pressure is too low, the tire will rub against a large area for a long time, which will cause the tire sidewall to bend and break, which will cause a puncture accident.

Therefore, taking good tire pressure in summer is the key to preventing a puncture. Experts recommend that it is most appropriate to reduce the tire pressure by about 10% in summer. If the owner has more funds, he can also provide tires and spare tires.

Nitrogen. Nitrogen is a noble diatomic gas with chemical properties.

Extremely inactive, coefficient of thermal expansion.

Low, low thermal conductivity, when the temperature changes, the degree of volume expansion is much lower than that of air, reducing the chance of a puncture.

The way to reset the Mercedes tire pressure indicator is not difficult :

First of all, adjust the tire pressure to the standard value.

Then turn on the ignition switch, press the multi-function button on the left side of the steering wheel, bring up the menu interface in the instrument, select the maintenance option, and then through the steering buttons of the steering wheel, select "tire inflation pressure" and press the "OK" button, wait for the instrument to prompt "After driving for a few minutes, the tire pressure will be displayed", press the flip button, the meter will display "Use the current pressure as a new standard value", at this time, press the "OK" button, and the instrument will display "Re-enable the tire pressure monitor".

Finally, turn off the ignition switch, and the elimination of the Mercedes-Benz tire pressure monitoring indicator is completed.

Common Mercedes-Benz models in the tire pressure monitoring is the test wheel speed sensor for simulation calculation, if after eliminating the tire pressure indicator light for a period of time, the indicator light lights up again, you need to check whether the tires have air leakage.

1. To clear the tire pressure warning light of the Mercedes-Benz C200 vehicle, you need to start the vehicle first and turn on the display screen of the vehicle. 2. Find the vehicle status in the vehicle settings of the Mercedes-Benz C200 vehicle display below, and click on it. 3. Next, Suixiao will be able to find the tire settings on the display screen of the Mercedes-Benz C200 vehicle, and you can click without a single click.

4. Click on the Mercedes-Benz C200 vehicle display screen to reset it.

5. Finally, after the reset of the tire pressure alarm system of Mercedes-Benz C200 vehicle is completed, the tire pressure alarm light will be cleared.

Photo by Pacific Automobile Network Q&A).

1. The key is in 2nd gear or the car is started. 2. Press the left side of the steering wheel to the left or right (until the meter shows the total mileage or the temperature outside the room). 3. Press up once (the meter displays the reset interface).

4. Press the R button in the middle of the upper meter once (yes or no should be selected for the status display). 5, the right side of the steering wheel + select yes6, and wait for the interface to change and it will be completed.

Tire pressure, strictly speaking, refers to the pressure of the air inside the tire. In car maintenance, the engine is the heart of the car, and the damage of the engine will lead to the exhaustion of the car's life, so the tire pressure is the blood pressure of the car, and the tire pressure plays a vital role in the performance and power of the car.

Nowadays, many tires are not filled with air. For these tires, the tire pressure requirements are stricter. Air-filled tires are related to the changing seasons.

And tire pressure is closely related to the performance of the car, such as comfort and carrying capacity, and can also affect the life of the tire. Air pressure is the lifeline of a tire, and too much and too low will shorten the life of the tire.

If the air pressure is too low, the deformation of the carcass will increase, the sidewall is prone to cracks, and at the same time, it will produce flexural motion, resulting in excessive heating, promoting rubber aging, cord layer fatigue, cord breakage, and will also increase the tire grounding area and accelerate shoulder wear. If the air pressure is too high, the tire cord will be subjected to excessive stretch deformation, the elasticity of the carcass will decrease, and the load on the car will increase during driving, and the impact will produce internal cracks and bursts, and at the same time, the high air pressure will also accelerate the wear of the tire crown, and reduce the rolling resistance. (Photo by photo:.)

Pacific Automobile Network Chen Jie 2).