How to adjust Mercedes Benz E260 tire pressure monitoring

1. First of all, start the Mercedes-Benz E260, and the following interface will appear on the Mercedes-Benz E260 dashboard.

2. Keep pressing the Mercedes-Benz E260 steering wheel.

select the maintenance option on the dashboard.

3. Then press the OK button on the Mercedes-Benz E260 steering wheel.

4. Wait until the Mercedes-Benz E260 dashboard appears in the interface shown in the figure below.

5. Then press the select button on the Mercedes-Benz E260 steering wheel and select Yes.

6. Finally, restart the Mercedes-Benz E260, and monitor the tire pressure of the Mercedes-Benz E260.

It's adjusted.

The arrow keys on the left side of the steering wheel Left and right Find the light adjustment Press OK to go in The tire pressure does not display the specific value Only alarm when there is no air.

This tire pressure needs to be set in advance, that is, you will charge all four tires into the standard tire pressure and then drive on the road for about 10 minutes, you need to press and hold the set button of the tire pressure, in front of the gear handle, long press for a while The system will knock, which means that the tire pressure monitoring system has recorded the current four tire pressure values, the standard of the tire pressure system is the current tire pressure value, any tire will be flat in the future, or the time is lower than the tire pressure value you set now, the system will alarm, That is, there will be a fault light on the instrument with a bang, which is the same indicator light as the front of the gear handle, yellow, but the system will not tell you that it is the tire, you need to see it yourself, and measure it yourself. When you need to press and hold the set after flushing, the fault light will be eliminated. If you want to change your standard tire pressure, such as turning the tire pressure lower in the summer and the cold tire pressure higher in the winter, you will need to reset it, run on the road for a while after the air is flushed, and then press and hold to remember the current value.

The first step is to turn on the ignition to the ON gear, and then select the maintenance interface through the buttons on the left side of the steering wheel, up and down, left and right, and OK, and confirm whether the tire pressure is normal or not, and then continue to confirm the reset.

Step 3: Press the R button on the left side of the instrument once, and the instrument displays "Yes and No" (English) Step 4, use the plus and minus buttons on the right side of the steering wheel to select Yes (English) and then wait for about three seconds after the instrument display is successfully reset in English.

I'm glad to answer for you and hope it helps.

Mercedes-Benz E260L tire pressure lamp reset tutorial.

1. The tire pressure should be restored to a normal level before resetting.

2. Find the "Maintenance" option in the trip computer.

3. Select "Tire" in the maintenance option, and the system will display "Use the current air pressure value as a new reference value?" Finally, press the confirmation button on the left side of the steering wheel.

Summary. Hello, I have seen your inquiry, please wait for a moment and answer it for you immediately.

Hello, I have seen your inquiry, please wait for a moment and answer it for you immediately.

Hello, I am your exclusive technical Ling New Year's Master, attentive, careful, dedicated to answering your car questions, for you to find the corresponding problem solutions and noisy solutions! Your question: how much is the normal tire pressure of Mercedes-Benz E260, the normal tire pressure of the car, the tire pressure standard in summer is the tire pressure between the to, and the tire pressure in winter is the standard tire pressure.

My car is 12 imported Mercedes-Benz E260 tire specifications are 235 40ZR18 plus some tire pressure, which is the most standard.

Now there is no change in the tire pressure measurement, but the tire pressure monitoring always alarms.

If there is always an alarm, this needs to check the tire pressure sensor itself, or the tire has a slow air leak.

Last time, the tire pressure was so low that it didn't call the police, but now it is inflated and it calls the police.

That means there is a problem with your tire pressure monitoring system, and the tire pressure sensor is not monitoring accurately.

Is it possible that the tire pressure was too low before it could not detect the air leak, and now the tire pressure is enough it can detect the air leak.

No, it's just that there is an abnormality on the tire pressure monitoring right now.

You can help me take a look.

You need to go to the repair shop decoder to see it, otherwise the judgment will not be accurate.

The standard tire pressure is what I said, and the tire pressure monitoring is not accurate, which means that there is a problem.

If I can help you, please give me a thumbs up Thank you!

Adjust the tire pressure to the standard tire pressure, start the engine, display the mileage interface on the dashboard, select the upper arrow from the left side of the steering wheel, a string of English letters will appear, and then press the R button above the dashboard or there is a small black button on the dashboard, it will appear, yes+, no-, and then select the plus sign on the right side of the dashboard, return after a few seconds, restart after turning off, and there will be no more prompts.

Mercedes-Benz B200 as the entry model of Mercedes-Benz, Mercedes-Benz B series models have a fashionable exterior design, large interior space, and relatively complete configuration, which is very suitable for family use. In terms of safety, the B200 inherits the excellent safety performance of the Mercedes-Benz brand: ABS anti-lock braking system, ESP electronic stability program, BAS brake assist system, full-size driver and passenger airbags become a strong guarantee for the safety of occupants in the car.

1. First of all, start the Mercedes-Benz Jingbian E200, and the interface shown in the following figure will appear on the vehicle dashboard.

2. Then pass the Mercedes-Benz E200 steering wheel.

on the Select key, select a maintenance option.

3. Then press the confirmation button on the steering wheel of the Mercedes-Benz E200.

4. Bright beam oak and other equipment to the Mercedes-Benz E200 car dashboard.

When the interface shown in the figure below appears, press the OK button on the steering wheel.

5. Next, through the select button on the Mercedes-Benz E200 steering wheel, select Yes.

6. The tire pressure of the last Mercedes-Benz E200.

The lights can be eliminated.

Steps to eliminate Mercedes-Benz E280 tire pressure light:

1. Turn the ignition switch to 2nd gear.

2. The system key is flipped to the mileage or temperature interface.

3. Use the up and down keys to turn to the tire pressure indicator.

4. Press the R button on the meter.

5. There will be a "+" button that asks you to press the volume button to reset the tire pressure before resetting.