What problems will occur if the radiator does not install a valve

First, the heating valve is a kind of handwheel valve, the use of this valve is, to the left twist is closed and semi-closed, to the right twist parallel to the pipe is to open the valve, generally the valve has a mark, there is an arrow pointing, can be opened in the direction of the arrow on time, if the heating valve is not installed, it will cause unnecessary water leakage accidents.

2. Precautions for the use of heating valves.

1. When testing the water, keep people at home and open the inlet and return valves.

2. The running wind should be in a closed state.

3. Don't shake the heater, and don't load the heating pipeline.

4. Non-professionals should not dismantle and alter the heating.

5. The valve should not be opened and closed frequently in the heating season, and the valve can only be in a fully open or fully closed state.

6. When there is water leakage, close the water inlet and return valves immediately.

7. Check whether there is water leakage in each interface within three days of stopping heating.

8. Method: Touch the connection of the pipeline with your hands, and notify the professional for maintenance immediately if there is water leakage.

9. It is ideal for steel radiators to be maintained with full water.

10. The method of central heating full water maintenance is to close the heating inlet and outlet valves within one day before the heating is stopped.

Third, the heating valve should not only be installed, but also installed in place. The technical content of heating is relatively high, the use time is long, and problems are easy to cause collateral losses, so installation quality and after-sales service are the second life of heating.

Under normal circumstances, each group of radiators is equipped with 2 valves, which is used to control the temperature and water flow of the radiators, and secondly, if the room is not used often in the case of fewer people and more rooms, it can be closed, so as to save gas! In addition, it is easy to maintain.

Valve is a very important accessory of the radiator through the valve can adjust the water flow of a single radiator The relationship between the valve and the radiator is equal to the relationship between a light and the switch, there are many unprofessional companies will definitely say that the water flow can be adjusted like a water separator, it is indeed possible, but it is very inconvenient Generally, regular HVAC companies will be equipped with valves Looking for an HVAC company needs to be cautious Wuhan Junda is not bad.

When the heating leaks, there is nowhere to turn off, the radiator is normally equipped with 2 valves for each group of radiators, the function is to control the temperature and water flow of the radiator, followed by if the home is less people and more rooms which room is not often used then can be closed, so that gas can be saved! In addition, it is easy to maintain.

It's not hot when it's time to be hot. He wasn't hot when he shouldn't.

It cannot be turned on or off. Traffic is not well distributed.

It is relatively cumbersome to overhaul a single group.

RadiatorsInstall a valve on it, and it is useless to put some water when the heating is not hot.

The valve installed on the radiator is the air release valve, if the heating is not hot, it is useless to release water, and you can't release water without permission, if you are caught, you will be fined by the heating company.

01. The heating is not hot, and it is <>useless to open the air valve to release water

I live in the north and there is a heating period every winter.

In recent years, the heating situation in the home has been very bad, the temperature is not enough, and the room is very cold.

Let me explain to you, what is the valve installed on the radiator called? This valve is called an air bleed valve, and there will be an air bleed valve on every piece of heater.

The function of the air vent valve is to remove excess gas from the radiator.

Every year when the heating season comes, the master of the heating company will tell me that the air valve will be opened first to exhaust the air, and then the heating will heat up.

The air vent valve on the radiator only plays the role of exhaust, if the heating is not hot, it is useless to open the air vent valve to drain water.

02. The heating is not hot, it may be that the radiator is blocking the <>

Some people say that if the heating is not hot, wouldn't it be hot if you put some water?

That's not right.

If the radiator is blocked, draining water will not solve the problem.

Besides, how much water does it have to be released to heat up the heating through the air vent valve? Obviously, this is not the right approach.

Let me teach you a method, if the heating in your home is not hot, you must first check whether the radiator is blocked?

If the radiator is blocked by rust, you have to find a way to dredge it, unload the radiator, take something like wire to dredge, take out the garbage, the radiator is passed, the circulation will be good, and the heating will be hot.

03. The heating is not hot, and the pressure from the pump room is not enough, so it is necessary to report for repair and <> in time

In the city where I live, the heating temperature in the whole city is not up to standard during the heating period, and every farmer shouts that it is not hot, and the heating is not hot, because the pressure from the pump room is not enough.

There is no other way but to choose to report for repair in time and let a professional maintenance master come to repair.

Central heating, there is a gas collection tank on the top floor of the unit building, and the gas collection tank should be opened to release the gas, so that it will be hot.

If there is no gas in the gas collection tank, that is, the pressure coming out of the pump room is not enough, so you have to find a professional maintenance master and ask them to ask for gas from above.

Otherwise, the heating will not be hot, this situation is also a very headache, my family lives on the top floor, every year when the heating is not hot, every time you have to find a maintenance master to repair.

Epilogue Friendly reminder to everyone,It is not possible to drain water privately through the air vent valve of the heater, which isIllegal Behavior

The heating company has the right to impose fines on those who release water without permission.

Of course, when the valve is installed and the heating is running, some of the gas will be stored in the radiator, which will not cause the hot water loop to be blocked, which is conducive to heat exchange. The valve, called the air release valve, is used to release the gas accumulated in the radiator so that the hot water flows more smoothly, and the corresponding heat exchange is strengthened, which is also hotter.

Of course not, because when the heating is not hot, you can turn on the plumbing pipe of the heating to circulate it, not by draining the water.

Of course, you can, so that you can promote the circulation of hot water in the pipes, and you can make the heating warmer.

Abstract First connect the inlet and outlet valves of the radiator with the radiator pipe, and then measure with a level to determine whether the installation is straight, if there is no problem, then tighten the connector of the valve with a pipe wrench, and finally test to ensure that the valve can be used normally.

Reasonable installation of radiator valves.

First connect the inlet and outlet valves of the radiator with the radiator pipe, and then measure with a level to determine whether the installation is straight, if it is determined that there is no problem, then tighten the connector of the valve with a pipe wrench, and finally test to ensure that the valve can be used normally.

Radiator valve installation - radiator installation method 1, when opening the radiator package, be sure to carefully check whether the radiator type, color and accessories in the packaging box are complete, regular radiator manufacturers such as Rubens radiator free of charge to provide standard accessories such as running wind, plugs, expansion nails, hooks, etc. 2. Be sure to install the water inlet valve and the return valve, don't ignore it in order to save money, otherwise it will be difficult to repair the radiator after failure. 3. Strictly install the installation legend of the radiator for installation, first smash the expansion screw and hook into the wall, install the radiator with running air, plugging and valve (you can wrap some raw material belt in an appropriate amount), and then put the radiator on the hook, and finally connect the valve with the pipe, and the radiator installation will be successfully completed.

4. Pressure test: close the main connection valve, open the radiator inlet valve with pressure test equipment, the test pressure should be times of the normal use pressure, and not less than the test pressure of the entire residential pipe network, 3-5 minutes without leakage is qualified. The correct installation of radiators can undoubtedly add wings to home decoration and achieve the perfect effect of home heating.

Summary. Dear, hello, the radiator valve can not be opened, you can check whether the direction of the valve is correct. Generally, the trend is closed, and the reverse is open.

First: Make sure to open the valve, which is generally a ball valve, and you can screw it 90 degrees. Second, there is a button at the top of the pipe in your house that can be pulled, which varies from place to place, some are pulled halfway up, and some are pulled up completely.

Thirdly, there is also a black disc-like thing underneath, commonly known as the Qi Ming Core. This one is the same as the second one, pull it out half or all of it, so you can use it.

Dear, hello, the radiator valve can not be opened, you can check whether the direction of the valve is correct. Generally, the trend is closed, and the reverse is open. First:

Determine that the tung argument to open the valve, generally a ball valve, screw 90 degrees on it. Second, there is a button that can be pulled at the top of your house's empty road, which varies from place to place, some are pulled halfway, and some are pulled all up. Thirdly, there is also a black disc-like thing underneath, commonly known as the Qi Ming Core.

This is the same as the deficit of the first game, pull half or all of it, so that it can be used.

You can also dig to check whether the heating is stopped or in arrears. The valve closure is the result of the user's suspension or arrears, if it is a report to stop, you can apply for use and pay in time, the reason for the arrears is closed, as long as you pay the arrears and the overdue payment of the nuclear fee and pay the current heating fee in advance.

If the radiator valve cannot be opened, it may be that the valve is opened in the wrong direction and the heating is in arrears

1. The radiator valve is not opened, causing the radiator to not be hot

If the radiator is not hot at home, you should first check whether the radiator valve is open. The radiator valve is generally a spherical valve, the valve has generally been adjusted before leaving the factory, generally only two directions, the handle is open when it follows the pipe, and the rotation is 90 degrees to close.

In general, radiator heating is safe, convenient, comfortable and environmentally friendly, and there will be no problems under normal circumstances. If there is a problem that the radiator is not hot at home, there is no need to worry about being bored, find the right cause and the right medicine, or find a professional to help.

Second, the radiator is not hot due to the gas plug of the radiator

It is understood that there is a group of radiators at home that are not hot, mostly because of the air lockage inside the radiators. There is hot water flowing in the heating pipe, and then a large amount of gas will enter, and there will be gas precipitation from the hot water continuously, if not discharged in time, air blockage will occur, and the hot water is difficult to circulate so that the radiator does not dissipate heat or dissipates heat slowly.

The solution is to unscrew the exhaust valve to vent the air and let the hot water run normally again.

3. The radiator is not hot due to the imbalance of the system operation

The dysfunction of the heating system can easily cause the radiator to not be hot, because the hot water flow in the pipes is unevenly distributed, and even some radiators only have a small amount of hot water flowing through. If the hot radiator is turned off, the non-hot radiator can be warmed up, which is a sign of system dysfunction.

The solution can be adjusted in the indoor system, turn off the hot radiator first, let the non-hot radiator heat up, and then slowly turn on the hot radiator so that all the radiators can operate normally.