Make a disc 100 out of some commonly used software

Norton. Software to burn discs.

Spinning top can be said to be a timeless toy, whether it is children or the elderly like to play, the discarded disc in life after simple processing, to make a beautiful, interesting spinning top for children to play, this is not a very creative idea, its production method is not difficult, let's learn how to use the disc to make this interesting little toy by hand!

Materials: old discs, paints, brushes, sandpaper, marbles, hot glue, brushes.

Method steps: 1. Use sandpaper to rub off the pattern on the disc.

2. Apply a layer of white pigment on it.

3. After that, use a brush to apply another layer of bright colors.

4. Finally, use hot glue to insert the marble into the small hole in the middle of the disc, so that you can do it! Isn't it fun and easy, so let's make it yourself.

Old discs are perforated around the perimeter and can be used to store earrings when laid horizontally.

Driving on the highway to cover the license plate to avoid speeding and taking pictures.

The handmade encyclopedia and methods of waste discs are as follows:

Step 1: Cut two of the old discs in half with scissors. Four discs were cut, two of which were used for the puppy's ears and one for the puppy's body.

Step 2: Fold the carton sheet inward on all four sides, the fold edge is not too wide, fold into a tetrahedron. This paper frame is used to secure puppies.

Step 3: Stick the complete disc with a glue stick or glue to the top and center of the paper frame.

Step 4: Puppy nose making, cut the puppy's black nose can be black paper or black cloth, cut out a round one. The dog's nose is cut and glued to the center of the disc.

Step 5: Take two symmetrical semi-circular discs and put them together on both sides of the circular disc as cool dog ears.

Step 6: Puppy mouth making method, the production material can use the DIY puppy step 4 to make the puppy nose material, just the puppy mouth we need to cut out the oval shape.

Glue the cut oval shape underneath the complete disc as your dog's mouth.

Find a square piece of floral cloth and make a bow, have you guessed that this is a dog's bow tie?

Sew it underneath the complete disc with a needle and thread, the position of the dog's neck, and the cute bow tie is done.

Take another semi-circular disc and glue it under the bow tie with a glue stick to serve as the dog's body. Note: The semi-circular disc logo is facing up at this point.

Using colored paper, cut out a cute pattern with scissors, glue it with a glue stick, and decorate it.

Finally, the other leg of the sunglasses is also broken off and glued to the disc with a glue gun. Cute cool dogs are ready!

Introduction: How to make a disc by hand? Passed by mine. Did you find it interesting after the introduction? The following is a tutorial of the relevant steps, welcome to refer to it! Isn't it fun and easy, so let's make it yourself.

Method Steps:1. Use sandpaper to rub off the pattern on the disc.

2. Apply a layer of white pigment on it.

3. After that, use a brush to apply another layer of bright colors.

4. Finally, use hot glue to insert the marble into the small hole in the middle of the disc, so that you can do it!

First, the CD-ROM should use CD-R, the standard capacity of this type of disc is 700MB, just engrave a complete one on a disc.

XP system, buy a little bit when you buy, *** disc can not only ensure that the file within 700MB can be engraved, but also can be engraved some, and some of the poor quality can only be engraved 650MB.

2. Nero is a German company.

Disc burning. program, which supports ATAPI (IDE).

Target. Disc burner, support Chinese.

Chinese Simplified Chinese version", install nero

System file. To be intact, store in partition d.

Fourth, the process of burning system discs.

1. Start NEOR

burning

ROM software.

2. Set up burning.

Select "cd" from the drop-down list in the upper left corner of the left pane of the "New" window, and click ".

cd-rom

iso), set options:

1) Information. 2) Multiple segments.

Click "Start Multi-Segment".

3）iso：

Data: Data Mode - Select Mode 1

File: File System - select ISO9600+

File name length - select 11 maximum = 8 + 3 characters.

Character set. - choose ISO9600 (standard);

Broadband Limit: Tick the Options.

4) Tag: Automatic.

5) Date: Select "Date and time to use source file".

6) Other: Tick "From HDD or."

Network caching. file".

7) Burn: Operation: Tick "Write".

Write: Write speed — 16 24

Write mode. — Disc burns at once. Number of burn copies.

3. Open the burn file.

Click the "Open" button to open the "Open" window, and the "Find Scope" drop-down list is selected for storage.

ISO file.

, select the ISO folder from the list below, and click the "Open" button to open the "Burn" window.

4. Write to the CD.

Hit the "Burn" tab in the burning window to display the burning progress, and the disc will be automatically ejected after burning.

The disc is also called the CD, don't look at it with a diameter of only 12 centimeters and a thickness of only millimeters, but it is a high-tech product.

The principle of making a disc is as follows: the processed laser is emitted onto the thin film of the disc, and the laser interacts with the recording material on the thin film, undergoing physical and chemical changes to form a recording point. It's like the handwriting we leave behind when we write on paper.