How to set the IP address of the Tengda router Urgently

If you use a router to build a local area network, realize network sharing devices; In general: Here's how to connect and set up:1:

Connect the network cable (RJ-45) of your broadband modem to the WAN of the router, and connect the network cable (RJ-45) to the LAN port of the router for the rest of the computer. Copyright Notice: This answer is original to "Harmony" and may not be stolen by anyone! ★2：

The IP address of the computer network card is set to be obtained automatically, and there is also input in the address bar of the computer browser, specifically according to the network parameters obtained by your computer network card, through the IP address of the gateway to log in to the router, most of the usernames and passwords are admin, select WAN port settings. Copyright Notice: This answer is original to "Harmony" and may not be stolen by anyone!

3: Set your broadband account and password to PPPoE mode (if it is a fixed IP, you should choose the static IP mode). 4：

Thank you for my answer!

Thank you: friend!

There are IP in the back of the router.

Log in to the management page of the router, click "Advanced Settings", click "Internet Settings", select "Static IP" as the Internet access mode, and then enter the IP address, mask, gateway and DNS of the corresponding jujube according to the actual stool rent, and finally click "OK".

First, open the browser and enter the wireless router.

admin background IP or domain name**, enter the admin background page, enter and password to log in to the backend.

After logging in to the Tengda router management Burning Clear background, find the system management, and pull to the LAN parameters, DHCP server.

If you check Turn on before uncounting the pith, the DHCP dynamic address allocation will be turned off, and the start and end addresses will be set, and the static address will be set.

Because DHCP dynamic address assignment is unchecked, you need to manually set the address between start and end when you are connected to the router's network in order to access the Internet.

Method steps.

1. First of all, you need to log in to the web management interface of the router, the login IP of Tengda wireless router is, the default password and user name are admin, log in.

2. After logging in to the router successfully, select "Network Parameters" and then "LAN Port Settings".

3. Modify the default login IP, for example, here, enter :, and then the setting of the subnet mask is not modified, and then click Save.

4. The router saves the settings and makes the settings take effect, and the router restarts and then the settings can take effect.

2. Enter the Tengda router operation page and click [Next].

3. Select the connection mode of the router to the telecom operator. Telecom opens [ADSL virtual dialing] [next step] for individuals.

4. When applying for ADSL virtual dial-up service, the network service provider will provide you with an online account and password, which should be filled in the following box.

5. This is done, and the password and user can go online normally after more than 20 seconds.

To change the IP address of the router, you need to log in to the router's settings page to change the IP address of the router, which is generally in the LAN port settings under the network parameters of the router.

If you don't have a Tengda router at hand, take the TL-WR541G 542G as an example, the specific steps are as follows:

1. Enter the current IP address of the router in the address bar of the browser, open the router login page, enter the router's management username and management password, and log in to the router's settings page.

The default IP address, management username, and management password of the router are usually printed on the bottom of the router, which can be seen by turning the router over.

If the current IP address and management username and password of the server have been modified, the only way to restore the router to factory settings is to ask an insider or check the modification documentation, but this method will erase all the current settings of the router, so be cautious.

2. Click on the LAN port setting under the network parameters on the router settings page, and then modify the IP address in the right window, the router will disconnect the link and restart after this address is modified, and it may not be connected to the computer after restarting, you need to restart the computer or set an IP address with the same network segment as the IP address modified by the router to reconnect.

According to my experience of using Tengda F3, first connect the power supply, and connect the network cable to the WAN port; After the device is connected to the router, open the browser and enter or, log in (generally the username and password are admin) and enter the operation interface; Choose a way to access the Internet according to your actual use (PPPoE dynamic IP static IP), generally broadband is automatically assigned IP, if you want to modify, you can choose a static IP to enter the address provided by the operator. The device connection router can change the private IP address of the device, and the range is, if there is a conflict, just change it.

TP Router Settings and Router IP Change Method.

Unless a static IP address is applied for, there will be a change that will be randomly assigned by the operator based on the network balance.

Wide Pending Dial is a dynamic IP

Only when a business or an Internet café has a fixed IP

It can't be done unless you use a bare brazing.

Tools: **Nine. State **IP

Language: Chinese Simplified.

Environment: WinXP Vista Win7-10 Mobile 1Break through the corporate campus.

2.Dynamic IP to do web crawler!

3.Brush the traffic, brush the click traffic!

Rank up!

5.Modify the IP address

Multi-IP regions.

Will the IP of the router change? Or will the IP address of your computer change every time?

Most of Tengda's wireless routers use: as a set**; Tengda portable wireless routers and 3G wireless routers are used as settings**, and a small number of models of wireless routers are used as settings**.

Note the problem: The setting of the Tengda wireless router** is actually the IP address of the LAN port of the Tengda router, and the IP address of the LAN port can be modified; Once the IP address of the LAN port of the router is modified, the settings of the Tengda router** will also be changed, and the user must use the modified IP address to be able to log in to the settings interface of the Tengda wireless router.

Connect the router's line first, then log in to the router's management center, enter the broadband and password, and set the name and password of the wireless network. Here's how:

1. First, connect the router, modem, and computer together.

2. Then enter the browser and press the enter key to enter.

3. After entering the router management interface, select ADSL dial-up in the Internet settings, and enter the broadband and password.

4. Then continue to enter the password of the wireless network, and click OK.

5. If you see that the display is connected to the Internet, you can go online, which means that it has been set successfully.

Notes:1. When setting up the router, you need to remember the broadband and password.

2. The password must pay attention to the distinction between case and case.

The first step, take Xiaomi Mi 8 as an example, connect to Tengda wireless router wifi.

Step 2: Open the browser, enter the chain, and click Refresh. Summoning the Forest.

Step 3: Click Continue to visit the web version.

Step 4: Enter the administrator password and click OK.

Step 5: Select the network status, modify the Wi-Fi name and password, and click Save.