How to use wood wax oil, wood wax oil formula production method

Hello,Cheresi wood wax oil1. Substrate treatment White billet requirements: the moisture content of the wood does not exceed 20% Grinding treatment: Sanding the wood with sandpaper until the surface is smooth and smooth.

Sandpaper should be used in order from small to large, and the larger the number of sandpaper meshes, the more delicate the grinding effect. The finer and smoother the surface of the wood, the smootherWood wax oilThe better the effect, and at the same time, it is more economical to save wood wax oil. Hole Filling Treatment:

Nail holes, knots, scars and holes are repaired with transparent or same-color putty to be flat Cleaning treatment: make the surface before painting clean, dry, free of grease and dust 2. Operation instructions Stirring: After opening the can, stir fully until even.

Brushing: Use cotton cloth, hard brush, roller and other tools to evenly extend the paint in the direction of the wood texture, after slightly drying, if there is uneven paint on the surface, wipe off with a clean cotton cloth to make the surface of the coated wood smooth. The surface of the wood is painted in place, leaving no dead corners; If you don't need gloss, you can use a scouring pad or polishing cotton to achieve a matte effect after 6 hours of drying.

Operation method: apply directly, no primer, no dilution, stir evenly, and brush two to three times. 3. Drying time: Keep the surface well ventilated, the surface is dry for 4-6 hours, and the dry surface is 20-24 hours.

4. Maintenance and refurbishment Maintenance: Clean the old wood surface to dry, no grease and dust, and reapply a new paint Refurbishment: If the wood surface was previously usedWood wax oil, just clean the dust on the surface of the wood and brush it directly; If the surface of the wood was previously painted with traditional paint, the old wood surface should be restored to the new wood surface by means of paint stripper or sanding, and then the construction should be carried out according to the above steps.

5. Precautions The second time can only be applied after the first brushing, and the wax oil shall not be mixed with other paints or coatings for pre-coating treatment, and the surface will be polished to smooth, clean and dust-free Pay attention to product storage. Hope it helps. Choose a good wood wax oilCheresi wood wax oil

Wood wax oilHere's how to make the recipe:

Wood wax oil formula:

1. Wind-blown polymerized flax oil.

Carnauba wax (beeswax (dama resin (lac (citrus oil, d-limonene (anhydrous alcohol.

2. Wind-blown polymerized linseed oil (wind-blown polymerized rapeseed oil.

Wind blowing polymerized soybean oil.

Hand wax paste (carnauba wax (beeswax (dama resin (lac (citrus oil d-limonene (anhydrous alcohol (.

1. Turpentine is not recommended.

To make a thinner, the use of wood wax oil is for environmental protection, health, although turpentine is also a natural product, but its chemical composition and properties are harmful to the human body (natural is not necessarily environmentally friendly).

2. It is not recommended to use carnauba wax, which is Sichuan wax, which can replace carnauba wax in terms of performance, but it is higher than carnauba wax and is not economical.

3. It is not recommended to use Marty resin, ** is almost ten times that of Dama resin, and the economy is not strong.

4. It is not recommended to use ordinary flax oil and other oils, and unmodified oils cannot be used as furniture coatings.

5. It is not recommended to use Wuliangye.

**Almost 100 times that of anhydrous alcohol, although the taste is good, but the economy is too poor, haha.

6. It is recommended to use citrus oil (D-limonene) as a thinner, which is pure natural and environmentally friendly, harmless to the body, and smells good.

7. It is recommended to use wind-blown polymerized linseed oil as the main component of homemade wood wax oil.

8. It is recommended to use silicone modified wax paste, which is better than using carnauba wax in terms of performance and perception.

The villa master provides you with local building policies, building drawings, and villa design drawings;

Villa appearance renderings service, thousands of popular drawings for you to choose.

Villa Master.

The correct way to wipe wood wax oil is as follows:

1. Polishing first.

Let's take a wooden table as an example, first go to the hardware store to buy some sandpaper, you can buy 180 mesh, 320 mesh, 600 mesh sandpaper. Use this sandpaper to sand the surface of the wooden table until it is very smooth.

2. Clean up again.

There will be a lot of dust on the surface of the sanded furniture, so you can use a brush or cotton cloth to clean the dust on the surface.

3. Wood wax oil treatment.

At this time, you can turn on the wood wax oil, and then dilute the wood wax oil with thinner and stir evenly to be used in this trembling.

4. Coloring. Usually the color of the wax oil is fixed, if you need to use different colors, then you also have to buy a special color paste. Pour the color paste into the wood wax oil, stir well and set aside.

The rest of the aspects are clever

This step begins with a cotton cloth or brush, or you can buy a spray gun and paint along the grain of the wood, first applying the wood wax oil. After painting, place it in a sunny and ventilated place and wait for it to dry.

After the coating is dry, you can use polishing cotton, or if you can buy more than 1000 mesh fine sandpaper, you can also gently polish the coating directly. The purpose is to improve the feel, and after the grinding is completed, the dust on it is still cleaned up. Then stir the wood wax oil evenly and carry out the second painting, the construction method is exactly the same as the first painting.

After painting, place it in a ventilated and sunny place and let it dry.

Eco-friendly paints and coatings --- are now mainly used on wood products. Some can also be used on unglazed tiles.

To put it simply, it is a wood coating.

Wood wax oil is an environmentally friendly and healthy wood coating that does not contain formaldehyde.

Wood wax oil is a kind of environmentally friendly wood coating used in indoor and outdoor wood products, bamboo products, rattan products, simple construction, environmental protection, natural texture, delicate texture is its characteristics, but also the reason why many people choose wood wax oil, very suitable for DIY, no construction experience personnel can also operate the construction, construction is generally 2-3 times.

Wood wax oil construction steps:

1. Polishing the substrate to make its surface clean and dust-free.

2. Stir the wood wax oil fully to avoid the separation of oil and wax caused by long-term stationation.

3. You can use brushes, cotton cloths, spray guns and other tools to apply it, brush it thinly, do not build too thick, and avoid slow drying.

5. Polishing and grinding, with about 1000 mesh of fine sandpaper or polishing surface for gentle grinding on the surface of wood wax oil, can play a role in gifting brightness and feel, outdoor requirements for it is not high, can also not operate this step.

Wood wax oil is a coating that protects the surface of wood, which can effectively prevent wood from moisture, deformation, cracking and other problems. Here's how to use wood wax oil:

Prepare tools and materials: wood wax oil, sandpaper, brushes, clean cloth.

Clean the surface of the wood: Use sandpaper to smooth the surface of the wood to remove dust and dirt. Then wipe it clean with water to make sure the surface of the wood is dry.

Apply wood wax oil: Use a brush to evenly apply an appropriate amount of wood wax oil to the surface of the wood, taking care not to overdo it. If more coats are needed, you can wait for some time after the first coat before applying a second coat.

Wipe the surface: Use a clean cloth to gently wipe the surface of the wood and wipe off any excess wood wax oil. Be careful not to wipe too hard to avoid scratching the surface of the wood.

It is important to note that the surface of the wood needs to be treated before applying wood wax oil to ensure that it can fully absorb wood wax oil. In addition, it is also very important to choose the right wood wax oil for pure collapse, and different types of wood wax oil need to be used for different woods. It is recommended to understand the relevant knowledge or consult the advice of professional Tongyuan people before use.