What are the study methods and experience of the Certified Consulting Engineer Examination?

1.Confidence is the key, and the vocational exam is definitely simpler than the college entrance examination, graduate school, and the fourth and sixth level exams, so you must have confidence in yourself. Since you have registered, you have to make up your mind to pass, and you must not have the attitude of giving it a try.

If you're not ready, don't sign up. One blow of strength, then decline, three and exhaustion. It is not possible to pass the exam the more you take, and most of the people who pass it do it once or twice.

2.Teaching materials are the purpose. In fact, there is no focus and focus on the vocational examination, anyway, it is a book, this is out today, and that will be published tomorrow, with a wide range and shallow content.

In other words, you have to thoroughly understand the textbook. You must remember what you should remember, and if you can't remember it, you have to read it a few more times, at least mix it up, choose one of the four multiple-choice questions, and judge if you feel it. Blindly doing questions has little effect, after all, the question is knowledge, and the exam is a face.

3.Time is a prerequisite. At least one year before the exam should be prepared, say it is a year, go to work, family, friends and a lot of other things, there is not much time that can really be used to review, and it is less than three months to really enter the state of the exam.

Don't have the idea of "big exams, big plays, small exams, small plays", that's for the school. The vocational examination is to race against time, make use of the time that can be used in normal times, and not slack off.

4.The plan is the direction. If you don't have direction, you get lost.

At the beginning, you should make a test plan that is more in line with your reality, it doesn't matter if you write it down or not, but you have to be clear that you should constantly compare it with the plan you have made in the specific process, and make adjustments accordingly, The main purpose is to always know your progress and mastery of the preparation for the exam, and you must be in a state of imminent examination until the exam.

5.Mindset is the guarantee. A good attitude will have a good performance, and success or failure may depend on whose mentality is better.

Don't take the exam too seriously, don't take the exam too seriously, after all, if you can't take the exam, it's not that you don't have nothing to eat, always keep a peaceful mind, especially in the exam room, patiently complete every question, even if you are not sure, you must do your best. When I walked out of the exam room, I could say to myself that I had put all my efforts into this time and had no regrets.

The examination subjects of the Registered Consultant are divided into five subjects: Introduction to Engineering Consulting, Macroeconomic Policy and Development Planning, Engineering Project Organization and Management, Project Decision Analysis and Evaluation, and Modern Consulting Methods and Practices. The knowledge points of the consulting examination are relatively wide, and the macro economy, project decision-making, procurement and bidding process management, project budget management, financial benefit evaluation, etc. The difficulty is there.

But there are still people who pass every year. This requires finding the right direction, making up our minds, and working hard. In addition, it is necessary to have a basic understanding of the content, scope, scoring rules and question types of the test.

Be aware of it, and review it will be more targeted. Make a plan to revise for the exam, step by step, and you will definitely be able to pass the exam.

1.Keep an eye on the exam.

The exam dynamics here include: When is the exam? When to register?

Which version of the textbook and syllabus are used? What's changed? How many subjects do I need to take for the exam?

How long does the exam take? What are the eligibility criteria? How many years can the results be kept?

and other important information related to the exam.

However, no matter what happens next, the original intention of the Consulting Engineer exam will not change, so candidates can start preparing for the exam with confidence. To prepare for the exam in order from easy to difficult, candidates should pay attention to the time to prepare for the exam, our ultimate goal is to pass the exam, and the preparation must be focused. I believe that through their own efforts, candidates will be able to successfully pass the 2020 first-class cost engineer exam!

2.Review the textbook carefully.

The 2019 Consulting Engineer Exam uses the new version of the exam textbook and syllabus, and now the review of the guys should be subject to the new version of the textbook and exam syllabus. It is necessary for candidates to carefully review the textbook to make up for the lack of professional knowledge and lay the foundation for the exam.

Focusing on the revision of the old and new textbooks, you can listen to the lessons based on the new textbooks from the beginning, or you can listen to the special explanations of the comparison between the old and new textbooks; At this stage, it is necessary to further understand the knowledge points on the basis of the preliminary understanding in the early stage and form a knowledge system, which is like building a building, and the construction of the framework structure should be completed at this stage.

3.Do the past papers.

Candidates must do the past questions, the past questions are an important review material for the consulting engineer exam, and it is the essence of the exam.

Learning is sometimes boring, and some knowledge points are complicated, which will make you want to give up while learning! At this time, you must persevere, it is too difficult, you can put it aside for a while, and then focus on the difficult points after learning some knowledge points that are easy to grasp.

To sum up, if candidates want to do well in the 2020 consulting engineer exam, in addition to having a comprehensive understanding of the exam, they must also take the textbooks and past questions seriously, and then the candidates themselves should also calm their minds, study hard, lay a solid foundation, and master the easy test points. Believe in yourself and you will definitely be able to win the Consulting Engineer Exam 2020! Let's work together!

The difficulty of the examination between consulting engineer, first construction municipal, cost, supervision, and second construction is roughly as follows:

The first construction of the municipal "cost" consulting engineer "supervision" two construction.

If you already have any certificate of construction, cost, supervision and other engineering categories. Those who have been engaged in engineering consulting business for 8 years can be exempted from some subjects and only take the examination of two subjects: "Project Decision Analysis and Evaluation" and "Modern Consulting Methods and Practices".

As we all know, the examination time for consulting engineers is generally in April every year.

Now it seems that there are still 5 months left until April next year, and many test takers are wondering: Will it be too early to start preparing for the exam now? In addition, many candidates may be preparing for the exam for the first time, so they are also confused about how to study.

Xiaoyou picked out the cheats of Xueba to share with you, hoping to help you.

Wouldn't it be too early to answer first, where is there a dislike for the exam too early, only dislike is not early enough, earlier preparation means more time, and the probability of success is greater if you start earlier than others.

Then answer how to learn how to prepare for the consulting engineer exam effectively, in fact, there are six words: watch more, think more, practice more.

1.See more. When you decide to go for the exam consultation, the first thing you need to do is to look, what to see? Look at the content of the exam, what subjects to be tested and in what form, consulting engineers have carried out reforms after 16 years, and currently take 4 subjects: "Macroeconomic Policy and Development Planning", "Engineering Project Organization and Management", "Project Decision Analysis and Evaluation", "Modern Consulting Methods and Practices".

First go through the textbook yourself, take a cursory look, and then read it again, this time you have to take out what you are not familiar with, and then follow the teacher to learn again, once raw twice cooked three times, read more.

2.Think more. This is easy to understand, that is, you will always encounter some questions and chapters that you don't understand very well when studying, at this time, don't rush to find the answer, you should first think of the solution yourself and then write down your own ideas, or communicate with other colleagues, classmates or seniors and then look at the standard answers. Keep your mind moving, and don't try to find standard answers when you encounter a problem.

3.Practice more. Needless to say, what's the use of not practicing questions on the exam? Only continuous practice can make enough progress, and the better way to practice is to practice past papers, especially past past papers.

The last point is to be calm, consulting engineer is not too difficult to take the exam, generally speaking, as long as you are serious enough, you can pass well.

Okay, how do engineers learn better? Is there any way to do it? Of course, I have to study hard to do this.

Consulting an engineer, so far it is better to learn, just take a step-by-step approach.

1. Clarify the purpose of the examination and give full play to the subjective initiative.

Only with a clear purpose can you ensure that you can squeeze out enough time and energy for revision. Although I am busy with work and have a lot of entertainment, in order to pass the exam in one go and smoothly, it is necessary to calm down and revise with peace of mind, which will help improve the efficiency of revision. After all, what you learn is also helpful for your daily work.

2. Read the textbook intensively and be proficient in calculation.

In view of the fact that the knowledge points of this course are complex and diverse, the structure of the textbook and the context of the knowledge points are sorted out through intensive reading of the textbook, which is convenient for memorization. Based on the requirements of the syllabus (mastery, familiarity and understanding), combined with practical work experience, the method of memorizing the necessary calls varies from person to person. For various calculation formulas, it is necessary to understand thoroughly, clarify the meaning and value method of the parameters contained in the formula, and carry out necessary calculation exercises to achieve proficiency, so as to be accurate and fast in the examination.

In the first 4 courses, the content of the exam is all knowledge points in the textbook, so the review should focus on reading through the textbook.

3. Answering skills.

In view of the scoring criteria of "wrong selection and wrong judgment and missed selection" for multiple-choice questions, a steady strategy should be adopted for multiple-choice questions, and only the options that are really sure should be selected, and not greedy.

4. Combine work and rest, and carry out necessary physical exercises to ensure abundant energy. Maintain a balanced, confident mindset.

Skillfully grasp past past questions

There is a famous saying in the consulting engineer examination industry that "the heavy is always heavy", that is, the key content of the consulting engineer examination is basically fixed, although it changes every year, but the main content involved is basically unchanged, and more than 70% of the knowledge points examined are the consulting engineer examination has been tested or repeatedly tested in the past five years (except for the new knowledge points). And there are also duplicate original questions.

For the consulting engineer exam, the role of past papers is quite prominent, and we must have enough understanding of it - treat the past papers well. It should be said that the past questions are the essence of the consulting engineer exam, which shows the knowledge points within the scope of the consulting engineer exam in the form of questions, which is also the crystallization of the wisdom of proposition experts.

Through the analysis of the key points of the question, readers can understand the meaning of the relevant content, learn to analyze the problem from the perspective of the proposer, find the entry point, and cultivate the "sense of the question".

How do I use the textbook?

1. Don't fantasize about reviewing textbooks once and for all, and be sure to spend your own effort to take notes and integrate materials.

2. Look repeatedly, remember, remember, and remember.

3. First look at it line by line and sentence by sentence, then look at the key points of self-drawing, and then look at it in series with yourself.

4. Achieve systematization and clarity of knowledge through the comparison of knowledge points before and after.

5. After that, you will disrupt your original framework structure by doing questions, clear to vague, and then from vague to clear, and then from vague to clear, and only after such a process will you be able to use freely and flexibly use knowledge points.

6. In principle, the "three major books" shall prevail on the disputed issues, unless the textbooks are obviously contrary to the provisions of the law.

7. The consulting engineer exam is an exam-oriented education, and it is bound to take a lot of time to read the textbooks, so for some partial legal subjects, it is completely possible to focus on the law.

Big taboo

1. The concept of holistic and systematic learning is wrong, and students should not always force themselves to form a chapter or textbook knowledge point system in their minds when studying. Emphasis should be placed on memorizing "points" rather than "faces".

2. It is not advisable to do the questions without a specific purpose, most candidates do all the new and old questions when reviewing, in fact, this not only wastes a lot of time, but also causes other subjects, especially cases, to have no time to practice. It should be done with a targeted multiple-choice set of questions.