Is the abnormal noise of Buick Yinglang serious? Does it have many disadvantages?

I don't think the abnormal noise of this car is serious, this car has few shortcomings, it is very cost-effective, the failure rate is very low, it is worth buying.

Yinglang's abnormal noise is not serious, and the engine technology is very stable. This car has not many shortcomings, and there are not many places to complain.

The 4S store is equivalent to wanting to directly evade the relevant responsibilities and choose to take an indifferent attitude towards this matter. The abnormal noise of the car is mainly caused by the problem of the engine or the loosening of the chassis. The author believes that it can be done by going to the China Automobile Quality Network, Buick Motors.

After-sales headquarters, mass service **12345 reflects related problems.

1. Reflect relevant problems to China Automobile Quality Network

You can feedback your own problems to the China Automobile Quality Network, there will be the corresponding staff to arrange the quality inspection service of the car, after a multi-link rigorous and careful inspection, the problems existing in the car will gradually be exposed, and under the detection of professionals, you can know whether it is because of the quality of the car itself caused by the occurrence of frequent abnormal noises of the car, if so, the staff of the China Automobile Quality Network will notify the corresponding 4S shop to negotiate and communicate with the owner, And give the owner a satisfactory and proper solution.

2. Report relevant problems to Buick Automobile After-sales Headquarters

You can directly contact the Buick headquarters to respond to related problems, under the guidance of the relevant staff, re-stationed in the corresponding 4S shop, and under the supervision and guidance of the relevant personnel of the after-sales service department of the relevant Buick headquarters, the inspection process of the car will be rearranged, so as to detect whether the fault of the car is the quality of its own, or the improper driving of the owner, if it is a car quality problem, it will urge and guide the corresponding Buick 4S store to give the corresponding reasonable plan to the owner.

3. Serve the masses **12345 to reflect relevant problems

You can meet the situation you have encountered, call the public service **12345 in time to reflect the relevant problems, the relevant ** staff will also visit the relevant 4S car sales stores to coordinate and communicate, in the case of ineffective ditch disturbance, will arrange the car to carry out the corresponding multi-link testing, in order to eliminate the driving problems of the car owner itself, once the lead date is the quality of the car itself, then** The staff will inevitably ask the corresponding 4S store to compensate or give a reasonable solution.

Note: If it is detected that it is a quality problem of the car itself, then it is necessary to find and destroy the car purchase contract or even the car loan record in advance to verify the identity of the car owner and play a better role in protecting rights.

It is very likely that the quality of the products in this store is not rigorous, and at the same time, Zen Qin also hurts and guesses the legitimate rights and interests of these buyers, and then there is no way to ensure the safety of the vehicle, which will also lead to the loss of consumers.

This kind of problem often occurs in cars, so the car should be strictly inspected so that the safety of passengers can be protected.

In fact, all the car judges will dig Huai Wang more or less a Ming Qingding problem, we only need to choose a more cost-effective car, the problem does exist, but it can also be ignored.

You should go to the relevant place and get tested accordingly, so that you can have a very clear result. There will also be a very fair judgment.

1.The common cause of the new Buick's squeak is that the throttle is too dirty or the fuel nozzle contains too much carbon. Also, check the working condition of the spark plugs, high-voltage wires, and ignition coils.

Poor ignition system operation and poor spark plug ignition conditions can also lead to such failures. The solution is to check the spark plug for excessive carbon deposits and replace the spark plug.

2.If the driver has cleaned the carbon deposits from the engine, cleaned the throttle, replaced the fuel pad and spark plug, etc. However, if the body shakes when idling, the driver should thoroughly and professionally check whether the fuel supply pressure and intake pressure sensors are normal.

If the values of the fuel pump supply pressure and intake pressure sensors are abnormal or incorrect, and improper operation can cause vibration of the car body. Among the joint venture brands, Buick's sales have been not low, especially Yinglang, which ranks among the top five monthly sales of family cars.

Buick Yinglang abnormal noise in the car is mainly caused by the door lock, this is indeed a more common problem, can be solved by adding butter, other abnormal noise may also be the door sealant aging, hardening, due to long-term use, the sealing strip will become hard and lose its soft elasticity, so when closing the door, it will rub and squeeze each other to produce abnormal noise, the car will make a sound if it shakes slightly, and the sealing strip may need to be replaced.

Buick's new Yinglang door panel abnormal sound, what to do if the new Yinglang car door has abnormal noise, Buick's new Yinglang car door has abnormal noise, it may be that the sealant of the door is aging, hardening, due to long-term use, the sealing strip will become hard and lose its soft elasticity, so when opening and closing the door, it will rub and squeeze each other to produce abnormal noise, and the car will make a sound if it shakes slightly, and the sealing strip may need to be replaced. The abnormal noise caused by the door lock is a common problem in Yinglang, which can be solved by adding butter. If the parts or buckles in the door are loose and falling, the door can only be dismantled for inspection, and it can be reinforced with 3M glue or filled with foam to solve the problem of abnormal noise.

How to solve the abnormal noise of Buick Yinglang door, how to deal with the abnormal noise of Buick Yinglang door is mainly caused by the abnormal sound caused by the door lock, which can be solved by adding butter, and other abnormal noises may also be the aging and hardening of the sealant of the door, due to long-term use, the sealing strip will harden and lose its soft elasticity, so when the door is closed, it will rub and squeeze each other to produce abnormal noise, and the car will make a sound if it shakes slightly, and the sealing strip may need to be replaced. If the parts or buckles in the door are loose and can only be removed for inspection, the problem of abnormal noise can be solved by reinforcing it.

Buick's new Yinglang driving door abnormal noise, the new Yinglang door abnormal noise how to solve the Buick new Yinglang driving door abnormal noise is mainly caused by the door lock, this is indeed a more common problem, can be solved by adding butter, other abnormal noise may also be the door sealant aging, hardening, due to long-term use, the sealing strip will harden and lose soft elasticity, so when closing the door, it will rub against each other to produce abnormal noise, and the car will make a sound if it shakes slightly, In this case, the sealing strip may need to be replaced. If the parts or buckles in the door are loose and can only be removed for inspection, the problem of abnormal noise can be solved by reinforcing it.

Buick Yinglang gearbox problem, Yinglang gearbox abnormal noise What's going on Buick Yinglang gearbox abnormal noise: mainly due to the damage to the internal bearings of the gearbox, if there is still abnormal noise after replacing the bearing, it is a problem with the gears of the gear. At present, Yinglang gearbox is mainly due to abnormal noise, oil leakage, and the control module is prone to failure.

These are all common problems of Buick Yinglang gearbox, especially for the problem of abnormal noise, it is a big problem to solve the gearbox gear, and the oil leakage can only need to replace the oil seal, and the failure of the control module is only to replace.

Photo by Q&A) M5 Trumpchi GS8 AION V Macchiato DHT PHEV Latte DHT Hiphi X @2019

Generally speaking, it can be divided into three aspects: the harsh belt whistling, which is caused by the belt slipping. The engine is accompanied by the screeching sound of dry friction of metal parts when it is running, due to damage to the bearings of the generator, water pump, and power steering pump.

If it's the sound of an engine leaking, it could be the result of a clogged exhaust system, a leaking or ruptured vacuum tube. Moreover, it is normal for the cold car to step on the accelerator to about 40 yards shortly after starting, which is the sound of the ABS system starting. Abnormal engine noise can be roughly divided into abnormal engine noise at idle speed, abnormal engine noise during cold start, and abnormal engine noise during rapid acceleration.

Learn to distinguish between abnormal noises that are reasonable sounds.

On the issue of abnormal noise of automobiles, it is difficult for ordinary car owners to distinguish which ones are abnormal noises and which ones are reasonable abnormal noises. Only nearly 20% of the vehicles that went to the repair shop to detect abnormal noises really had problems. In the case of a turbocharged engine, there is a must be a difference between the sound and the sound of a naturally aspirated engine; Models with engine guards may also make noises due to friction; After some car owners come into contact with different cars, it is likely that due to their lack of understanding of mechanical knowledge, they mistake reasonable abnormal noise as a vehicle failure.

Therefore, learn to distinguish the abnormal noise of the car and avoid wasting time and energy.

Second, the identification method of car noise:

In practice, due to the limitations of working conditions, it is difficult to measure the sound of the car with special instruments, and the sound of the car can only be described and compared with the judgment of the sound in daily life. For example, the "rattle" sound caused by the dry friction of the bearing, and the "click" sound similar to the small hammer hitting the cement floor caused by the excessive valve clearance.

1. Correctly distinguish between normal and abnormal sounds.

The vibration of each mechanism in the work of the car will emit a variety of sounds, but the sound does not mean that the car is faulty, in order to avoid unnecessary disassembly, we must first distinguish between normal sound and abnormal noise. The normal vibration sound of each system component (such as the noise on the surface of the engine), the impact sound of the gear when shifting, the air intake sound and exhaust sound of using gas as the working source, and the gear meshing noise are all normal sounds. Abnormal noise (abnormal noise) can be divided into slight noise, general noise and malignant noise according to the impact on the performance of the car.

Slight noise, such as the flashover sound of high-voltage electric leakage, the slight loose sound of rolling bearings, etc., the general volume is small, the degree of wear of the parts is not large, and there is no significant change for a long time, and this kind of fault can still maintain the normal operation of the car without repair.

3. When diagnosing abnormal noise, attention should be paid to creating good auscultation conditions and trying to eliminate the interference of other noises, so as not to affect the accuracy of judgment.

It is best to consciously amplify or reduce the sound, that is, use a screw or other metal rod as a stestological instrument to contact the sound part to amplify the sound, or use a single cylinder fire cut-off to reduce the sound to meet the diagnostic needs. The auscultation site should be kept quiet to minimize human interference.

Hello Buick Yinglang makes a strange sound after ignition, mainly because the starter is worn out and the starter is loose. When the engine room is abnormally loud, the specific causes are divided into belt slippage, generator damage, exhaust system blockage, vacuum pipe leakage, and breakage according to the sound.

1. The toner of the carbon brush of the starter motor affects the speed of the starter motor, and the gear corresponding to the engine is not quickly disengaged, and the sound produced by the hanging teeth.

2. The engine of some cars has a long engine life, and the idle speed is high every time it starts, and this phenomenon will occur.

3. The oil added for car maintenance may also be affected, so you should choose the right oil for your vehicle.

3. The belt needs to be replaced for a long-term car, and this sound may also occur when the belt is worn.

Hello... If it's a chirp. It is a belt noise. Check the belt tension. If there is a click. It's the sound of the valves. Cold starts will have a short period of poor lubrication.

Just listening to the sound, you can't accurately judge the condition of the vehicle without driving experience, it is recommended that you go to a 4S shop or auto repair shop to find a technician! Sometimes the abnormal noise is not necessarily a problem with the vehicle. It needs to be judged on a case-by-case basis.

There are many possibilities for starting abnormal noise, and it is necessary to determine the abnormal noise source first.

What is the sound of seeing? If it really doesn't work, go to a professional repair shop to test the computer!

Most noises are difficult to hear at the first time, requiring repeated adjustment and auscultation before the location of the fault problem can be determined. And many failure problems have similar phenomena, but the reasons are different. Generally, the reducer bearing emits a piercing "rumble" or "squeak" sound, and the sound rhythm is stable and changes with the change of vehicle speed.

When the vehicle is coasting, the front bearing of the reducer cone driving tooth is noisy, and the rear bearing is noisy when driving. The reasons for the noise of the new Buick Yinglang chassis: 1

The noise emitted by the car when it starts is generally a suspension system failure, which may be caused by loose or damaged engine mounts; 2.The noise made by the car when cornering can be a malfunction of the steering and suspension systems. Since the car leans during cornering, the suspension system is deformed, and it is also involved in the movement; 3.

When the car is driving in good road conditions, the noise may be caused by the failure of the brake system components, or it may be caused by the loose wear of the brake system components, the unrounded brake drum or the uneven plane of the brake disc; 4.It can also be a bearing problem between the dynamic and static parts of the car. If it's a bearing problem, the driver can tell it by braking slightly.

If the sound of the brakes does not change when the car is driving at a constant speed, it is a bearing problem.