How to avoid winter renovation traps? Three major problems of winter decoration with solutions

What are the precautions for winter decoration?

1.When spraying various paints, oilers should apply them strictly according to the temperature in the product instructions. Under normal circumstances, the ambient temperature of paint application should not be lower than 5 degrees Celsius; Among them, the ambient temperature of the commonly used mixed color paint should be above 0 degrees Celsius, and the ambient temperature of the varnish should not be lower than 8 degrees Celsius.

2.The main materials used in the decoration, especially wood, should be prepared in advance, and it is best to place it in a room with heating equipment for three to five days, as it is easy to volatilize the moisture formed due to temperature changes. This is done so that the moisture content of the wood is close to the level in the house, so as to avoid deformation after renovation.

3.The sand used by bricklayers should be carefully sifted and should not contain ice, and the temperature of the water should not exceed 80 degrees Celsius when mixing the mortar. If there is bricklayer work that needs to be made of cement in the renovation, it is better not to work in the open air. The construction site should also pay attention to thermal insulation.

Tips: Pay attention to close doors and windows in winter decoration construction to ensure that the indoor temperature is at least not lower than 5 degrees Celsius. In particular, oilers should pay more attention to "keeping warm", and then open doors and windows for ventilation after they are fully dried.

In addition, it is windy and sandy in winter, so be careful not to let the sand particles fall on the undried paint surface.

Generally speaking, winter is not suitable for decoration, the temperature in winter is too low, and some water-containing materials are easy to freeze and difficult to solidify, especially the wood, tiles, floors, paints, and glues required for hard decoration. It is easy to achieve the expected effect due to weather conditions, so that it is difficult to achieve satisfactory results in decoration. Here are the three most likely situations to occur, and reveal the corresponding solutions for Dajing Haojia.

Brand store: Runtai Decoration Oubiya.

Problem 1: Cracking of the veneer.

Solution: After the decorative panel is transported to the construction site, the dry towel should be used to wipe off the floating dust, and the varnish back cover should be painted twice in a row. All decorative panels should be placed flat, with a large core board at the bottom and a large core board pressed on top, which cannot be placed vertically, so as to prevent the panel from cracking and warping.

Problem 2: Cracking of the wall.

Solution: Ventilation with normally open windows is best between 10 a.m. and 4 p.m. The temperature is relatively high during this time, which can prevent the new batch of putty from freezing.

Wait for the first putty to dry completely, and then batch the second time. After the putty is completely dry for the second time, it is carefully sanded with sandpaper. It is best to paste the sand-gray wall and the insulation wall with a bean bag cloth or a good cloth, and scrape the putty directly on the bean bag cloth or good cloth until it is dry and then sanded with sandpaper.

If there are large holes or depressions in the wall, it is best to use gypsum powder and latex to mix and flatten the wall, which is convenient for quick drying and firm. When there are large cracks on the wall, the local place is double-pasted kraft paper and then batch putty, and when the area is larger, it is best to paste bean wrap cloth and then batch putty.

Problem 3: Gypsum board ceiling cracks, gypsum line cracks.

Solution: When carrying out gypsum board ceiling operation, the joints between gypsum boards, gypsum boards and walls, are left with a gap of about 1 to 2 cm, first use caulking to make up, then double paste kraft paper, and then scrape putty.

The moisture content of the wooden keel must be controlled below 12%, and the "keel" must be firm and not loose, so as to prevent cracks in the gypsum board ceiling. When sticking the gypsum line, let the gypsum board and the top surface and the wall leave 0?A gap of about 5 cm

In people's inherent belief, construction is not suitable in winter. Therefore, every winter, most families who are anxious to move out as soon as possible are anxious for the cold winter to pass as soon as possible and decorate their new homes in the spring of the next year. As a result, the great opportunity for renovation was wasted.

In fact, winter is the best season for decoration. Due to the harsh construction conditions in winter than in other seasons, there are many unavoidable problems in winter construction. Since the spraying work of the paint must be above minus 5 degrees Celsius, the temperature has a greater impact on it; The climate in winter is drier, and the concentration of paint increases, which is not easy to paint; In the winter decoration, because the plate itself is in a shrinking state, if the installation is too dense at this time, the plate will heat up when the temperature is hot in summer, and if the joint is too small at the time of construction, it will cause deformation in the future because there is no extension position.

Although there are some disadvantages to winter decoration, there are also factors that are suitable for decoration. As long as it is handled properly, the strengths and weaknesses are avoided, and some problems that are prone to winter decoration can be successfully decorated and perfectly decorated in winter. The main manifestations are:

In the current decoration materials market, due to the constraints of the best factors, there is almost no real drying wood, the wood moisture content in winter is the lowest, the degree of drying is the best, and the wood is not easy to crack and deform in this season. Winter does not affect the paint spraying. The quality of the paint directly affects the final effect of the decoration, because the baking of the indoor heating in winter makes the air dry, the paint dries quickly, which effectively reduces the adsorption of dust particles in the air, and the paint effect is the best at this time.