When word 2010 generates a table of contents, the content of the abstract is recorded in the table o

Upstairs is a mess.,The landlord's problem is that the content of the abstract is also in the table of contents.,You must be using a first-level title or other titles you set to brush the word "summary",This doesn't work.,Don't go to brush.,Teach you a simple:Set the word "summary" to the title 1 or any other format.,As long as it's not the title of your directory.,Or the format of the text.,Set the content behind the abstract to the format of the text.,Other fonts,The size or something is set again. When generating a table of contents, put the format of your abstract in the options, I assume that it is heading 1, and set the directory level of heading 1 to 1, or you can set it to which level you want to be at which level, and generate a table of contents, there are only two words of abstract. The English abstract is set the same, as for the capitalization, after generating the directory, select the English capitalization those, or simply select the entire directory is no problem, right-click into the "font", "small caps", "all caps" before the tick is removed, OK.

Of course, you need to make sure that you only use the word "abstract" in the format "abstract", otherwise there will be another content in the format of heading 1 in the table of contents.

Text, text, formatting, layout. 1. Select the title of all levels; 2 On the left side of the formatting toolbar, "Style" list and click Title "1" to set the format of the title 1 according to the requirements; After step 1, 2 set two or three headers to format as heading 2, heading. Please note that English abstracts and abstract summaries should be set to the first level.

Second, the first step of automatically generating the table of contents: the left cursor of the first word is positioned to the first page of the text (the English table of contents at the back should be in the body; 2) Execute the menu command "Insert References Index and Table of Contents" dialog box to open the catalog index; 3. In the dialog box, click the Directory tab to make relevant settings, and click OK to automatically generate the directory.

Select all the things you don't need to put in the directory, there is a small box under the "paragraph" under the development tools at the top of the start screen, click on it, select the outline level - body, OK, then go to the references and click on Update Table of Contents. And then that's it.

How to solve this problem, urgent?

After the word document table of contents is completed, if there is a new outline title, you only need to update the table of contents to add it.

The specific steps are as follows:

1. Open the Word document (the picture below is the demo text).

2. Add a first-level title (the following figure is the fourth title of the demonstration).

3. Click the table of contents with the mouse, and select the [Update Catalog] button at the top (in the lower version of Word, you can right-click the directory with the mouse, and then click Update Directory).

4. In the pop-up pane, select Update Entire Directory.

5. At this point, the new title outline has been added.

If you want to add one or more items to an automatic catalog that has already been generated, you can do so without affecting other catalog items

Step 1: Set the title level of the new content.

Step 2: In the generated directory, type a blank line in the position where you want to add the directory, find "Cross-Reference" in the "Insert" menu, click it, and the "Cross-Reference" window will appear.

Step 3: In the "Cross-Reference" window, select "Title" for the citation type, select "Title Text" for the citation content, and then find the newly added title in the title displayed below, click it, and then click the "Insert" button.

Step 4: Select "Page Number" for the reference, and then click the "Insert" button again to close the cross-reference window.

Step 5: Type a "tab" key between the content of the title and the page number just generated.

Step 6: Use the format painter to unify the format of the newly added directory items. If the color and underline appear when using the format brush, you can set the color again and remove the underline.

If you want Word to automatically generate a table of contents, you can't create an outline index that the system can recognize, which is the premise of automatic table of contents.

Now that we're ready, we're going to generate the directory. First, position the cursor in the directory where it is stored, and then, click on the tab's references - >> Table of Contents >> >> >> >> >> >> >> >> >> >&

The table of contents will be automatically generated.

If multiple articles have been updated, or the directory structure has been adjusted, then you need to update the field of the directory, click on the directory, and the right-click drop-down menu - "Update Field".

It is recommended to choose to update the entire directory so that it will not be missed, click OK to update.

If you are not satisfied with the default directory format of the system and need to customize it, you can also do it. Click on the quote ->> Table of Contents ->> to insert the table of contents.

There are many options for the table of contents format, such as whether or not to display the page, whether the page is right-aligned, display tabs, how many levels to display, etc.

At the same time, you can also set the font size and format of the directory, click Modify - >> Select the directory you want to modify >> Click Modify >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >

After all the custom settings are made, click OK, and a replacement prompt box will appear in the place of the just directory, click Yes.

The directory of the first font has just been changed to compare with the previous one, and of course, you can customize the more complex directory format you like.

If there is a problem with the style of the directory, you can modify it, and the simple modification operation is as follows:

1. Open the directory dialog box: Reference-> directory-> insert directory 2. In the open "Directory" dialog box, the simple operation is to modify "General"."(the settings in the red box in the figure below, select different formats, and the above print preview and web preview can be viewed).

If you need more detailed ways to set up the directory, you can send me a private message.

1. Move the cursor to the location where you want to insert the table of contents, click on the References tab, and click on the left table of contents. Choose an automatic catalog. Or, if you need to work on the format of the directory or something, you can click to insert the directory.

2 There are some options to choose from. (There are three main ones: there are a variety of formats for you to choose from, like a set of templates, easy to use.)

The line between the table of contents title and page number can be set with a tab leader. The display level generally does not need to be changed, and it is accurate to three layers is sufficient. ）

3. Set it up and click "OK", and the whole directory is ready.

Select the abstract and adjust the outline level in the paragraph format to the body.

Select Delete the summary content directly.

1. Position the mouse to the front of the ** body, then switch to the "References" tab, click the [Table of Contents] button in the "Table of Contents" option group, and select an automatic catalog style in the drop-down list that opens immediately, such as "Automatic Table of Contents 1".

2. Click the selected directory to quickly generate the directory corresponding to the current document and insert it into the document. end to insert a directory of other styles.

3. Execute the [Insert Directory] command in the "Directory" drop-down list. In the Catalog tab of the Catalog dialog box that opens, you can set the options according to your personal needs. For example, in the General options area, select the Formal format in the Format drop-down list box.

Finally, click the OK button to close the dialog box, and the document directory in the corresponding format can be generated.

4. In the written ** document, click the mouse to quickly generate the document directory, which is convenient and fast, and saves a lot of time.

After the table of contents is successfully added, the entire document writing work is basically completed.

The directory box is not affected, it will not be displayed in print, it will be saved in doc format, and there will be no box in 2003.

Have a directory box? You send it to me.

I'm using WPS.,Because there's a directory box and was scolded to death by the teacher.,You just don't care about it.,After it's all done.,Just save the document as doc format.,Open it and there's no more.。 Because WPS saves in docx format by default.

The title style is not set correctly, reset it, note here that the title must be followed by a carriage return, not a manual line break (that is, the downward arrow marker).

What you said is too messy, I don't understand, the document is here, I'll help you take a look.

After the word document table of contents is completed, if there is a new outline title, you only need to update the table of contents to add it.

The specific steps are as follows:

1. Open the Word document (the picture below is the demo text).

2. Add a first-level title (the following figure is the fourth title of the demonstration).

3. Click the table of contents with the mouse, and select the [Update Catalog] button at the top (in the lower version of Word, you can right-click the directory with the mouse, and then click Update Directory).

4. In the pop-up pane, select Update Entire Directory.

5. At this point, the new title outline has been added.

In word2007, first set the title level of the newly added content, and then do the following: reference - table of contents - update the table of contents - update the whole table of contents - OK.

I don't understand the landlord's problem, how to add new items when the original directory is done, if the entire directory is changed, the original work will be lost. I've also encountered this situation, so please give me some pointers.

You need to set the appropriate outline level for the content added to the document, and then you can update the content added to the table of contents when you update the table of contents. To set the outline level, select the content you want to set, and select one or another level at the outline level [Formatting] [Paragraph] [Indentation and Spacing].

Set the outline level of the new content correctly, then select the table of contents, and then update the field.

Right-click on the directory area - Update Fields - Update Catalog.

It hasn't really been tuned into the text yet.

Check the operation to see if something is incorrect.

Alternatively, you can delete this paragraph directly from the table of contents.

Select this paragraph and set the outline level to body in the paragraph formatting.

You don't have a paragraph mark in the middle of that paragraph, so you must have put a bunch of words in the table of contents.

When grading, press enter to add paragraph markers, and then select the previous one to modify it to the title.