How to make a pattern pen holder by hand? How to make the pen holder handmade

Wash the plastic bottle of soda after drinking, dry it with a cloth, and then use scissors to cut off the larger bottom for later use. Pay attention to try to be as flat as possible when cutting, so that it is more beautiful to cut out. Use scissors to cut out the opening edge of the bottom plastic bottle with scissors to cut out a shape, circle, arc, triangle, etc.

Prepare a blank sheet of paper and a box of watercolor pens to create a brighter color of the scenery here. The design of the scenery is also drawn according to your own preferences, it can be the marine world, the prairie, the zoo, the playground, etc., depending on everyone's preferences. I like to add some greenery to the table, so I choose grass to paint.

The cutting of the painted scenery is the hardest and most critical step, here it is recommended that the pattern of the scenery can be painted larger, so that it is easier to cut, cut along the edge of the pattern, cut out will be better and beautiful. The pattern that has been cut hard is now pasted, and the solid glue on the back of the pattern will be more convenient and easy to operate than the double-sided tape. Then assign the position of the pattern and put it on reasonably.

After pasting, a simple, beautiful and generous pen holder is ready, and then put the pen we usually put in the pen holder, and then find a suitable place to place the pen holder, so that we no longer have to worry about not finding the pen when we want to use the pen.

Prepare six pieces of colored paper (because this origami pen holder is a combination of six parts), take out a piece of colored paper and fold it in half along the middle line of the square, then fold it in half, four traces appear after opening, and then fold it in half and then fold it in half, and then fold it in half after opening, and the crease presented after opening divides the square colored paper into 16 small squares, fold the small squares on the four corners of the square in half along the diagonal, after folding in half, fold the rectangular area where the folded part is located inward, and after folding, flip it to the other side, Fold the outermost two small rectangles of step 8 inward, inserting one rectangular area into the other until it is fully inserted.

The tutorial of making a pen holder by hand only needs to prepare some popsicle sticks, as well as materials such as paper cups, tape, glue, etc., and it can be completed in a few steps. Suitable for children of any age, it is easy to understand and can not only exercise children's hands-on ability, but also cultivate their environmental awareness, arrange the popsicle sticks neatly, and apply tape to the upper and lower levels. Then roll it up to make a cylinder and put it in a paper cup and you're done.

Let's make a LEGO doll-style pen holder out of a glass bottle! You only need to prepare a glass bottle, yellow and black paint, a paintbrush, and the materials and tools are ready, find a way to paint the glass bottle yellow, and then paint the expression It's OK The paint can choose acrylic, and the painting shop can buy it. If you want to buy gouache cheaply, then spray a layer of varnish after the painting is dry.

If you want to be beautiful and don't care about being expensive, you can consider buying mineral pigments, the color is very beautiful, and the medium is acrylic.

The materials needed are easy to collect, which is the tin cans used to hold milk powder! Let's tear off its label and dress it up again, if you're interested, try it In addition to milk powder cans, we also need to use black tape. Attach the tape to the mouth of the can, cut out the sharp corners, and make a pair of ears.

Continue to paste and wrap the entire milk powder can with black tape. Cut out the eyes, beard, nose, etc. from the white paper, and paste them on the milk powder can, and the cute black rabbit pen holder is ready.

Share a relatively simple pen holder method: we can first carefully cut off the bottom of the paper cup. Then fasten it upside down on cardboard and glue it along the edges. With the addition of buttons, popsicle sticks, twist sticks and other decorations, it is a very beautiful pen holder

It's really super simple: cut to the right height, stick a piece of cardboard at the bottom, and wrap your favorite wrapping around it. I like to use wallpaper the most, you can stick it directly, or use double-sided tape to paste your favorite colored paper, and decorate it according to your favorite, such as my emperor!

The ultra-simple handmade pen holder is not only beautiful but also usable.

The practice of the pen holder is as follows:Tools Raw material: square colored paper.

1. Fold the square colored paper on opposite sides.

2. Fold two of the adjacent corners towards the midline.

3. Fold the opposite side towards the midline.

4. Fold the left and right sides to the midline.

5. Glue it with glue to make it look like a three-dimensional body.

6. Make a total of 6 identical shapes in the same way.

7. Then glue them all together.

8. The pen holder is ready.

The handmade pen holder is made as follows:

Materials: including denim scraps, sealing adhesive paper cores, paper pattern kraft paper scraps, leftover tags, etc., basic factory scraps.

1. Find two 2-and-a-half-inch sealing tape paper cores, which are available in the packaging department, and glue them up and down to make the blank of the pen holder.

2. I found some flower patterns on the Internet for reference by car flowers.

3. Find a piece of washed denim in the board room, denim after washing, color and style can be varied, I selected a whitewashed light-colored cloth, a little elastic, intended to embroider royal blue thread, is expected to be an imitation blue porcelain effect, and then use a ruler to measure the surface length and width of the pen holder core data, according to which cut out a piece of cloth with a reserved paper mouth, with the line on the real size of the first car a frame, in order to control the size of the pattern.

4. Patterns embroidered with electric flat cars.

5. When making the second pen holder, because I choose thin denim, I have to iron the fabric with an iron after cleaning the embroidery pattern with water.

6. Use the jeans tag and the kraft paper used for the paper pattern to make the bottom of the pen holder.

7. According to the circumference length of the paper tube, sew the jeans well and put them on the paper core.

8. Glue the cloth tightly to the paper tube.

9. Use the cloth tag of jeans to frame the outsole and inside of the pen holder, so that the pen holder is basically done.

Here's how:Materials needed: scissors, utility knife, empty drink bottles.

1. Remove the outer wrapping paper of the beverage bottle, and then use a utility knife to cut it in 1 3 places on the beverage bottle.

2. Use a utility knife and scissors to trim the incision of the beverage bottle to prevent the burrs from pricking your hands during use, and trim them neatly.

3. Take the incision as the starting point, and use scissors to cut the bottle into vertical strips, with a width of 6 mm and a length of about 4 cm.

4. Press down the cut plastic strip horizontally so that it is perpendicular to the beverage bottle.

5. Select a vertical bar and fold it to the left, and the top of the vertical bar is opposite to the edge of the third vertical bar to the left.

6. Continue to fold the cut vertical bars in the way of step 5 in turn until all the vertical bars are folded.

7. After all is completed, put in the pen and start using it.

The practice of the pen holder is as follows:

Tools Original which beam orange material: square colored paper.

1. Fold the square colored paper on opposite sides.

2. Fold two of the adjacent corners towards the midline.

3. Fold the opposite side towards the midline.

4. Fold the left and right sides to the midline.

5. Glue it with glue to make the shape of the Li Tuan.

6. In the same way, make a total of 6 slags of the same shape.

7. Then glue them all together.

8. The pen holder is ready.

Hello, happy to answer your questions! Prepare the materials: a mineral water bottle, a pair of scissors, cotton thread (depending on the color you like), hot water.

1.Cut off one part of the remaining dust on the mineral water bottle with scissors and cut the edges evenly. 2.

Put the bottle in the hot water basin to soften the edges, and turn it outward along the mouth of the bottle one centimeter so that it is not easy to cut your fingers. 3.Prepare a colorful cotton thread for destroying the car, and use double-sided tape to glue the cotton thread around the body of the mineral water bottle.

4.Roll the cotton thread into a circle and paste it in different positions on the bottle body, and other things can be pasted and matched at will, and the pen holder is completed. 5.

Hope it helps!