How to use Epson wireless screen transfer projector

First of all, we must understand the projector line connection: now it is generally mainly connected to the power cord and VGA cable, when connecting the VGA cable, check whether the projector and the input terminal have VGA connectors, that is, the blue fifteen-hole trapezoidal connector of conventional computers. In addition, if there is a DVI connector at the projector and input terminal, it is generally a white 18-pin or 24-pin rectangular connector, and the VGA cable can also be converted to a DVI cable.

As for the old-fashioned ** wire (a joint), the kind has now been eliminated, so I won't list it for the time being. In addition, if the whole projection system does not have audio equipment and the projector has a loudspeaker, it is necessary to connect the audio cable in two, except for the DVI cable.

After the input and the projector are connected to the cable, take out the remote control board in the projector box, install the No. 5 battery, and then press the power button (usually red or colored), wait for the lamp to be preheated and self-test within 20 seconds, the temperature will be low for a little longer, and the blue panel image or the image of the input will be displayed on the curtain, wall, etc.

The way the projector is mounted determines the settings: for example, if you want to do it right, you only need keystone correction (some projectors have automatic keystone correction) and wait for the focal length and frame size to be adjusted. If you want to set the rear projection or hanging projection, you need to select "Installation Method" in the remote control board to set the rear projection or hanging projection, (the installation method may be different for different projectors, please refer to the manual) and then set the projection distance.

Set the projection distance: This is the most important step in using the projector. In general, when buying a projector, you can ask how much area the projector is projected relative to the reasonable distance of the projector.

For example, a projector is 80 inches for meters, 100 inches for meters, and 120 inches for meters. In principle, except for short-throw and engineering projectors, conventional projectors are that the farther away the projector lamp is from the display screen, the larger the display screen.

If the projector can't ask how far the projector lamp is from the display screen to cast the right picture, you can check the brand model on the projector manual, and then search for this brand model on the projector brand official**, and there will be an announcement. According to the size of the screen you want to display, make fun of the data given by the buyer or the manufacturer's official website. Note:

Teasing must be made within the data range.

Picture focal length clarity: Different projectors have different settings, some rotate the lens ring, some set the button, and some set automatically, repeat it several times until it is the clearest.

Finally, if the projector is used for the first time, the color cast is caused by the connection cable is not tightened, and it can be tightened. Remember to turn off the projection and turn it on again immediately, it will greatly affect the life of the lamp, you can turn off the projection five minutes after turning off the projector before turning on the projector.

It takes a projection treasure to achieve it.

Summary. Hello, the Epson projector turns on the bluetooth method.

1.Press the menu button on the body of the Epson projector;

2.Select Bluetooth in the system settings;

3.Select the Bluetooth audio function in Bluetooth, and turn on the Bluetooth audio by pressing the up and down buttons.

Extended content:If you want to use the Epson projector to connect to a Bluetooth device, you need to turn on the Bluetooth device you want to connect to"Pairing mode", and then select "Search for Bluetooth device" on the projector, and finally press the up and down buttons to select the corresponding Bluetooth device name, and press the confirm button to connect.

How to use the Bluetooth of the Epson projector.

Hello, Epson projector turns on Bluetooth method 1Press the menu button on the body of the Epson projector; 2.Select Bluetooth in the system settings; 3.

This method is suitable for Epson projectors that support Bluetooth connection) Extended content: If you want to use Epson projector to connect to Bluetooth devices, you need to turn on the "pairing mode" on the Bluetooth device you want to connect, and then select "Search for Bluetooth devices" on the projector, and finally press the up and down buttons to select the corresponding Bluetooth device name, and press the confirm button to connect.

The menu doesn't have this jian, and I can't find it in the settings.

Look again. Take a look at which key is pressed.

Press the button that goes down.

Press to Settings. I'm sorry, I was in a bit of a hurry last night.

You can look for any of these options to see if there is Bluetooth in them.

Bluetooth means Bluetooth.

Detailed tutorial:1. Open the filter cover on the back cover of the projector.

2. Remove the cover of the wireless unit.

3. Install the wireless unit module of Luyichang.

4. Set the name of the projector and the password for software access to the projector in the basic items.

5. In the wireless LAN item, set the dismantling wireless LAN electric god high source switch to on, if you don't want to use the wireless function, you can set it to off.

6. You can choose a security type and set a password so that you need to enter a password to access the projector.

The above is the Epson projector.

Installation and configuration method of wireless module unit.

Summary. 6. Select "Computer Only" means that the image will not be displayed on the projector, and the computer will not output the image to the projector; If we select "Projector Only", then the computer will turn off the image output on its own monitor, which in some cases will help save energy. As for copying, the resolution display output on the projector and computer is exactly the same; There is also an extension function, we can put the image output on one monitor to two monitors, and we can also adjust the resolution of these two different monitors differently, which needs to be adjusted by ourselves according to actual needs.

How to connect the Epson projector to the computer wirelessly.

Hello, dear, the Epson projector is wirelessly connected to the computer as follows.

1. Press the menu button on the remote control of the Epson projector to enter the projector menu interface.

2. On the wireless LAN page, change the connection mode to fast and change the security option to on.

Epson projector when connecting wirelessly,There may be some delay in the projection screen,It is especially obvious when projecting ** picture,This is a normal phenomenon,Don't worry。 If you need a lag-free projection screen, it is recommended to connect the projection through a wired connection, such as a VGA cable or HDMI cable.

Here's how to connect wired.

3. Open the computer desktop and right-click to open the screen resolution option.

3. Open the computer desktop and right-click to open the screen resolution option.

4. Enter the interface to change the appearance of the monitor and click "Connect to Projector".

5. Then, we will open the relevant setting options. What we need to pay attention to is,We can use shortcut keys to operate,Press the Microsoft logo key and the P key,You can quickly turn on the relevant settings displayed by the projector。

6. Select "Computer Only" means that the image will not be displayed on the projector, and the computer will not output the image to the projector; If we select "Projector Only", then the computer will turn off the image output on its own monitor, which in some cases will help save energy. As for copying, the resolution display output on the projector and computer is exactly the same; There is also an extension function, we can put the image output on one monitor to two monitors, and we can also adjust the resolution of these two different monitors differently, which needs to be adjusted by ourselves according to actual needs.

The Epson projector mobile phone connection tutorial is as follows:Material: Huawei P7-L07.

1. In the settings page of your phone, you need to find the smart assist and select enter.

2. Open a new interface at this time and continue to click on the multi-screen interactive jump.

3. Next, after completing the above operations, directly determine the wireless connection to the Epson CB-X21 projector.

4. In this way, you will see the corresponding results, and you can achieve the goal.

Preparation of the projectorInstall the Epson dedicated wireless network card to the correct interface (refer to the user guide on the projector's included CD), the wireless network card of some models is built-in to the projector, no installation is required, and the indicator on the wireless network card is normal after the projector is turned on (blue and green solid on or flashing).

If the above solutions cannot be solved, please log in to the "** engineer" on the Epson official website and communicate with the Epson engineer ** so that the problem can be solved in time. (Epson "** Engineer" service hours: Monday to Friday 8:30-18:00).