Acer 4736g notebook specs

Acer 4738G laptop is the i5-480MCPU machine, and the memory supports up to 8G DDR3-1066 type memory (i3-380M, i3-390M, and i5-460M are also the same).

Speed can be boosted by increasing the number of memory modules.

1.Start by preparing your tools, including a screwdriver and memory.

2.There will be a mark on the back of the notebook with a memory compartment, of course, different models and different brands of notebooks will be different. But it's all pretty much the same. Be careful not to make a mistake, and if you are unsure, it is best to check the manual or consult a professional.

3.After opening the lid of the memory compartment, adjust the position of the notched part of the gold finger of the gold bar to align it with the fixed protrusion of the slot, which is actually a foolproof design in industrial design.

4.Then insert the slot at an angle of about 45 degrees, and with a light tap, it will make a "pop" sound and snap into the slot. If you don't hear a sound, it's probably not installed properly and needs to be reinstalled.

5.After the installation is completed, close the back cover, and then tighten the screws with a screwdriver.

Your computer can support a maximum of 8G RAM with 2 card slots.

But if your system is 32-bit, the system will only recognize 3 GB of memory.

If your system is 64-bit, you can upgrade to 8G, otherwise you will waste 5G of memory.

Hope it helps.

It is recommended that you check the model batch, it has a lot of configurations, or go to the after-sales service to ask, generally you use a 32-bit system 2G is enough, 64 can add a 2G, or buy two 4G.

It is more suitable for design in a notebook for the following reasons:

1.The screen is relatively large, inches. To be honest,It's not too big to do a design screen.,I did architectural drawings and bought a 16-inch big book, it's not enough.,Fortunately, the broadband can open 2 A4 windows at the same time.。

1366*768The resolution has a good effect,16:9 widescreen, you have to see if the real thing is acceptable,My friend uses mine to make it too narrow,But I think it's very good for my own use,Everyone has their own preferences。

The processor is enough,The graphics card is a powerful tool for playing games on the N card of GT540M,It's not bad to use it to make pictures,1G DDR3 video memory 3D performance is very good。 4G DDR3 memory, with balanced. Overall, the performance is satisfactory for your use.

64-bit system, pay attention to the choice of 64-bit software or patch when installing daily software and games, the advantage is that the 64-bit system supports some 64-bit professional software better, and the 32-bit system cannot run the software written for the 64-bit system. Having said that, most of the commonly used 3D software supports 32-bit systems.

3.The brand is still good, the bottom plate design helps to dissipate heat, and the appearance is also very professional, even if you see the customer, you have a lot of face, and the design of this kind of thing is still up to the customer.

4.Very good value for money.

On the whole, this machine still meets your requirements, and you should pay attention to asking for an invoice when you buy it. I wish you a satisfactory machine.