Briefly, there are several kinds of resin luminous words

1. The resin luminous word is divided into:

1. Three-dimensional color matching: concave set, convex set, multi-layer three-dimensional color matching, crystal color matching;

2. Seiko epoxy three-dimensional color luminous words;

3. LED high-brightness epoxy luminous words for shopping malls;

4. Frontal and flat color luminous words;

5. Metal edge resin luminous words: stainless steel, titanium, iron sheet, aluminum-zinc edge three-dimensional luminous words;

6. Black hair white, black hair red, blonde yellow glowing words;

7. Linear neon luminous words;

8. Low-cost epoxy resin luminous words;

9. Gold, silver, and bronze luminous characters;

10. Crystal luminous words: integrated hand-formed crystal words, colorful crystal color luminous words, gold crystal luminous words, fake colorful crystal luminous words, solid colorful crystal luminous words;

11. Solid epoxy resin luminous words;

12, luminous luminous words; (No power supply, can be luminous at night) 13, marble luminous words;

14, pattern pattern luminous words; (The front can do a variety of patterns) 15, spherical luminous words;

16. Colorful luminous words, monochrome luminous words.

2. Acrylic luminous characters: use acrylic plates to engrave and shape through an engraving machine.

3. Blister luminous words: use acrylic as a plate and blister molding through a blister machine.

Fourth, the leakage lattice luminous word: use metal to make the word shell, punch the lattice on the surface of the word shell, and install the leakage lamp.

From the color of the word shell is divided into:

1. Monochrome luminous words;

Second, the plane color luminous words;

Three-dimensional color luminous words.

From the color of the lamp is divided into:

1. Monochrome luminous words;

Second, colorful luminous words; 3. Full-color luminous words.

The most commonly used ones are.

Blister word. Resin word.

Exposed words. Seiko.

Write light on the back. Mini-words.

In-plane nesting.

1. Metal welded word shell resin word.

Considering that the surface of the shell needs to bear the gravity of a layer of heavy resin, in order to ensure that the shell is not deformed, the resin shell is usually welded with the material of the bottom foot and the side belt. This process mainly produces different styles of resin characters by changing the sideband material and resin color. modality.

There is a disadvantage of the metal welded word shell resin word, that is, once there is a problem with the internal light source, the resin must be pried open to maintain, so the entire font has to be basically redone, but as long as you choose a high-quality light source, there will be basically no problem, otherwise there will not be so many customers choose resin luminous word signboards.

Second, the word aluminum edge resin.

The resin layer on the surface of the aluminum edge resin word is mainly transparent resin, and the transparent resin layer can make the aluminum edge resin word make a complex effect, we can paste the spray adhesive, light box paper, silk screen printing and other effects on the resin word light transmission plate, and then pour a layer of transparent resin layer on its surface. This effect is mainly determined by the transparent resin layer, and this effect can also be created by using a transparent resin layer for the resin characters of the metal welded word shell.

At the same time, the aluminum edge resin word is PVC aluminum Shuo plate bottom plate, sealed with glass glue, compared with the metal welding word shell resin word, when the internal lamp source of the aluminum edge resin word fails, it can be woken up by priing open the bottom plate for maintenance, which does not affect the resin layer on the surface, and the heat dissipation effect of the aluminum edge material is stronger, providing a suitable working temperature for the interior and prolonging the service life of the resin word.

Through the analysis and comparison of the above two resin word processes, more friends may be inclined to aluminum edge resin words, in fact, each practice has its own significance. The solid color resin layer used in the metal welding shell resin word has a special light leveling layer, which is more bright and full, and the transparent resin layer on the surface of the aluminum edge resin word is more to shape the appearance of a resin word and protect some of the best effects on the light guide plate. How to choose depends on the needs of the customer.

1.Make a good font and lay out the line.

Note: The interface between the line and the mold can be sealed with glass glue or silicone, and must be sealed to avoid resin leakage.

2.Cast the prepared resin material. That is, [3 copies A + 1 part B] Note:

The resin level is about 5mm away from the top of the mold, and the casting is stopped. The thickness of the resin casting layer is about 2cm. This layer is cast as a colorless and transparent casting layer.

It can be called a light guide layer.

3.After the light guide layer is cured, the second layer is cast, [A + B + homogenizer + color paste, that is, 3 parts A + 1 part B + (2-3% of A) homogenizer + (A's color paste] is the second layer of resin system, this layer is cast with the entire word mold, which is called the uniform light layer.

4.Natural temperature, or heating and curing to complete the curing of the uniform layer.

5.Repair the wrong place.

6.Note:1The inner wall of the glyph can be coated with reflective paint, so that the light emitted by the light source is repeatedly refracted inside the glyph to avoid the loss of the light source.

2.It is necessary to control the thickness of the light guide layer and the uniform light layer, and the above is the thickness of the resin luminous word. After mixing with B, it must be used up within 12 hours (it will slowly thicken during this time, if you feel that the viscosity can still be poured, you can continue to use it), if you can't use it up, discard it, and do not pour it back into A or B.

How to make a resin luminescent word:

Step 1: According to the font size, only make the shell of resin luminous characters, usually choose metal shell, iron shell, or stainless steel shell. There are also chain brands, if the volume is large, you can choose to customize the plastic shell. Usually, the size of the word shell is more than the size of the word, and the thickness of the production is between 3---18cm.

Step 3: Install the LED module (1) Clean the surface of the word shell (2) Install the LED SMD light. (3) Arrange it evenly and connect the wires.

Step 4: Attach the acrylic support sheet.

Step 5: Buckle the acrylic panel and glue it. Seal the perimeter of the acrylic panel with hot melt adhesive to prevent the resin from leaking into the word shell.

Step 6: Pour the resin.

Material details: 1. Imported aliphatic epoxy resin 2, light diffusion powder 3, imported LR colorant 4, precision electronic scale.

First, the resin luminous word.

Longxiang advertising resin luminous word - multi-layer three-dimensional color patent luminous word effect is higher, from the surface of the three-dimensional, at the same time rich in color, excellent visual impact. At the same time, it can make three-dimensional concave sleeves, convex sleeves, multi-layer three-dimensional color registers, drum surfaces, camber surfaces, etc.

Multiple effects. Integrated pouring molding, all handmade, fast, one hour per square meter of luminous words molding. The cost of resin luminous word shell per square meter is about 40 yuan, which is only equivalent to the cost of a mold of blister word, and if it contains a light source, the cost is only about 100 yuan.

Therefore, the production cost is very low and has an absolute advantage. The resin luminous word is purely handmade, and does not require equipment investment, so the investment is very small. The resin luminous characters are rich in color, and the color can be arbitrarily mixed through the color paddle. The resin luminescent word is cured at room temperature and does not occur anything after molding.

Variation. Second, acrylic luminous words.

The acrylic luminous word is made of the acrylic plate through the engraving machine, carved out of the glyph, the side is surrounded by metal, and the LED light source is installed at the bottom.

Third, blister luminous words.

The production of acrylic blister luminous words needs to open the mold, but also to repair the mold, and finally to make an iron groove, but also to spray paint, and then use the acrylic plate to press out a surface, but also to repair the excess edge, the production is troublesome.

Acrylic blister luminous characters require large equipment investment.

Light engraving machine, blister machine on the investment of tens of thousands of yuan.

There is a limit to the color of acrylic. Acrylic sheet is plasticized at high temperature and is easily deformed at high temperatures.

Fourth, the crystal glowing word.

From the effect of the crystal luminous words, the side is crystal clear, and the lighting is white and flawless, presenting an elegant and fashionable feeling. There are resin crystal luminous words and acrylic crystal luminous words on the production materials, and the effect of resin crystal luminous words is better than that of acrylic crystal luminous words.

Fifth, LED luminous words.

Broadly speaking, as long as the LED light source installed in the shell is light-emitting, it belongs to the LED light-emitting word, so the resin light-emitting word, acrylic light-emitting word, blister light-emitting word, crystal light-emitting word are LED light-emitting words, and in a narrow sense, the LED light-emitting word is generally defined.

For the leakage of luminous words, you can see the LED lamp beads from the surface. The production of leakage luminous characters must invest in punching machines, and the investment in production equipment is large.

The resin luminous word is cast into the word mold with a chemical formula and the word, the production process is more, more complex, the advantage is low cost, no need for any professional equipment, the blister luminous word is the word that is heated by a large blister machine and heated by the mold, the word is more beautiful, but the cost is correspondingly higher, the luminous crystal word is carved with a transparent acrylic plate plus acrylic panel, the external light, this word is used on small signs.

LED light-emitting word is a general term, like resin, blister can be called LED light-emitting word, there is a kind of plane light-emitting word, this word is relatively simple, carved out of the glyph, around the edge of the lamp.