How to strengthen wifi strength, how to increase wifi strength

1. Adopt the highest speed setting supported by the device.

Enter the router settings interface and set the wifi parameters. Set the speed of the wireless network to the maximum speed supported by the network device, that is, set it if the device supports it, set it if it does, and try not to set it to this form.

2. Set the MIMO enhancement mode.

If the wireless router supports MIMO Enhanced Mode, please also check this option on the settings screen, and then set the "Bandwidth" to "20 40MHz" (select the highest setting). However, not all routers that support MIMO have this option, if you can't see this option, just set the bandwidth.

3. Enable QoS control.

If you see this option, you may want to consider enabling it. In the LAN, if there are too many classmates, friends who use PPS to watch network TV, and students who use P2P programs, even if the signal is good, the Internet will also be very stuck, and it will be much better to enable QoS control.

4. Manage the wireless network card.

Nowadays, many notebooks are wireless network cards, and the wireless router with them can theoretically reach a network speed of 300m, but sometimes the network card needs to be set up. On "Computer" in the start menu, right-click and select "Manage". If you are an XP, you can right-click on the desktop "My Computer" and select "Manage".

5. Check whether it is enabled.

On the management interface, find Device Manager and find the wireless network card. Take a look at the Advanced tab in the properties and check if the mode is already set to Enabled. At the same time, set Throughput Boost to Enable, and set the channel to Automatic, or the highest value of the setting.

The method of enhancing the signal of the wireless router has been introduced to everyone, and we must learn it well, I believe that there are many users who do not have a wireless signal at home! You can try this method to introduce to you, and I don't think it will disappoint you. Although the wireless router is more convenient and the network speed is fast, it also has its limitations, that is, it can play its role with a network cable.

I believe that routers can break this limitation in the future and achieve true wireless routing.

1. Position the wireless router reasonably.

Since the wireless signal is greatly attenuated after crossing obstacles, especially through metal. In our family's house, there are a lot of reinforced concrete walls, so when we place the wireless router, we should make sure that the signal passes through the wall as little as possible.

2. Modify the signal channel to reduce interference.

In the configuration interface of the wireless router, we will see the wireless channel option. Generally speaking, there are 11 wireless channels of 54m, which are channel 1 to channel 11. Signal interference occurs when multiple wireless signals are using the same wireless signal channel.

Many users do not modify the wireless signal channel after purchasing a wireless router to use, so everyone uses the channel when the router is configured by default, so that channel interference is easy to occur. If there are neighbors in the vicinity who are using the same channel as ours, then the wireless signal for both of us will be affected. We can also use the Network Stumbler software to scan to see what wireless signals are nearby and which channel is being used.

Then we make modifications to our own wireless channels to avoid duplication with other channels.

The wireless signal at home is slow, try this trick to improve by more than half.

Buy a router with a boosted signal.

Signal enhancement software has no effect

The router is placed in an open area, such as to reduce penetration through walls

It is possible to buy a wifi booster.

Signal boosters are also OK, which can not only increase wifi, but also boost other signals.

Buy a router with good wall penetration performance and a large signal radiation surface.

Here's how you can boost your WiFi signal:

1. Update your WiFi device.

2. Set the best channel:

1) Log in to the router's management page;

2) Click "Basic Settings", change the "Default Channel", and select another better channel.

3. Adjust the position:

1) a central location in the home;

2) Keep away from interfering equipment;

3) Reasonable placement of antennas.

Fourth, prevent the outside from rubbing the net.

Fifth, the installation of auxiliary settings.

The method is as follows: 1. Keep the router as far away from the wall as possible and place the router as high as possible;

2. Reset the router: Adjust the wifi speed to 100% of the rate;

3. Upgrade the router, increase the coverage area of the router, and make a simple wifi booster with a can: cut an aluminum can into the shape of a radar and put it on the antenna.

Hello, I have seen your question and am sorting out the answer, please wait a while

1.First of all, we have to prepare an empty can and cut off the bottom of it2After cutting, we cut the can on the opposite side of the opening, and after cutting, we cut the edges on both sides, paying attention to the opening from the edge of the edge about 2cm not to cut, the same method we do another 3

Next, glue the edges of the two cans together with tape to prevent cutting hands, and you're done. 4.Then the simple wifi signal booster we finished was placed on the back of the router, and the cans had to be broken into such arcs.