Does adding floor heating pipes to the underfloor heating water distributor affect the heating effec

The weather is getting colder and colder, and many homes in the north have installed underfloor heating. Some people feel that underfloor heating is warmer than heating, and it does not take up space and does not ruin the layout of the room. Therefore, installing underfloor heating at home is a good choice for cold areas.

Which kind of floor heating is better to install? Let's talk about it.

What do you need to install underfloor heating at home?

1. Determine the heating heat source first, if the heat source used for heating in your home is several heating heat sources, then if you want to install floor heating, it is recommended that you install a temperature control device at the floor heating connection, so that the life of the installed floor heating system is getting longer and longer, and at the same time it can also play a role in energy saving and cooling, because the long-term temperature is too high will reduce the service life of floor heating.

2. If the floor height of your house is not high, it is recommended not to use floor heating. Because the floor heating is installed on the ground, it is necessary to lay pipes and do insulation, so it will occupy part of the thickness.

3. After the floor heating is installed, because it is a lot of pipes installed and laid on the ground, it is not recommended to install the wooden floor when the ground is decorated, because if the wooden floor is laid, it is necessary to drill holes in the ground, and the floor heating has been installed.

Which underfloor heating is good to install?

There are water floor heating and electric floor heating, and many people don't know which one is better. In fact, each has its own advantages and disadvantages.

Water floor heating: Generally speaking, the early installation cost of water floor heating is very high, and the maintenance of later problems is more troublesome, and the coil needs to be cleaned once every 2-3 years. However, it heats up smoothly, is suitable for the elderly and children, has a long lifespan, and can provide domestic hot water.

Water underfloor heating is suitable for areas with a heating area of more than 50 square meters, such as villas, townhouses, etc.

Electric underfloor heating: it does not provide domestic hot water, there is radiation; The circuit requirements at home are relatively large, and at the same time, it is not suitable for large-area installation. However, water underfloor heating does not require maintenance or cleaning, and the follow-up maintenance cost is also very low.

Electric underfloor heating is suitable for small and medium-sized apartments with a heating area of less than 50 square meters.

Yes, because the longer the floor heating pipe, the more driving area it has, the more driving area and insufficient water supply, the effect will definitely not be good. Supplement: Your 90 square meters use 3 roads, the effect is not good.

Answer: floor heating and water and electricity pipes to do not affect each other, my experience is that we must pay attention to the sequence of the process and prior communication, otherwise it will bring potential safety hazards, can not be careless, I am in the work, usually like this:

1. After the completion of the new wall decoration of the house, the floor heating party and the water and electricity party will hold a meeting on the spot.

This meeting will be very necessary, the on-site water and electricity side should plan the path of the water pipe and line pipe, and then the floor heating side should also plan the path of the main water pipe, especially under the wall-hung boiler, there will be cold and hot water pipes and floor heating supply and return pipes, so here the two sides should discuss in advance, their respective paths, otherwise it is easy to have a variety of pipe cross fights, and even affect the process of tiling.

In this way, everyone meets on the site in advance, plans their own pipelines, and communicates and solves problems on the spot, so that there will be no impact in the later stage.

2. The construction of the hydropower process is in the front, and the floor heating construction is in the back. After discussing the construction details, the construction of the hydropower process should be carried out first, whether the water pipe goes to the ground or on the top, the hydropower should enter the site for construction first, and then the construction of floor heating can be carried out after acceptance.

At this time, the water pipes and line pipes of hydropower construction can be slotted and buried in the ground, even if some water pipes cannot be 100% buried under the ground, it will not hinder the construction of floor heating; Because the floor heating has a 2 cm thick insulation board and a 4 cm concrete backfill, when encountering a water pipe protruding from the ground, you can use the height of the floor heating to bury it, and the ground handed over by the floor heating will not highlight this problem.

In the later stage of the construction of floor heating, as long as the floor heating pipe is constructed before, a very small number of wire pipes can also be carried out, but because the insulation board is not suitable for large-scale personnel to move and trample, it can only be a small range of installation of wire pipes, and this method is also a last resort first aid method.

Summary. Floor heating and water and electricity are usually required not to cross construction, mainly to protect the floor heating pipes and water and electricity pipes, so they must have an on-site meeting before construction, and everyone will discuss the pipeline path; Then the hydropower will be constructed in advance, and the floor heating will enter the site for construction after the acceptance is completed, so that they can not affect each other.

It is best to ask a professional construction team to design, and also pay attention to the laying of underfloor heating and water and electricity pipes. To grasp the order of laying, it is necessary to change the water and electricity first, and then lay the floor heating.

When doing hydropower and floor heating, there should be no pipeline, and the floor heating should be arranged in a very good way, so as not to affect the transformation of hydropower and the direction of hydropower.

Underfloor heating can be installed underground. In addition, the plugs of underfloor heating and plumbing pipes should not be in one place. It is best to choose a longer plumbing pipe, which can directly connect the bedroom and the living room.

1. It is best to walk all the way from the main pipeline.

2. If you want to connect from the ambiguous film, you need to use tandem. Parallel connection is not possible.

3. The temperature may be very high, about 30 degrees, so the tube does not need to be too dense about 25cm.

4. The use of pipes is also very important, because the temperature of the heat source of the radiator is very high, and ordinary floor heating pipes are not good, so it is recommended to use PB pipes.

The main function of the floor heating circulation pump is to increase the circulation flow of floor heating hot water, so in order to play its role, the circulation pump should be installed on the main pipe of the return pipe, that is, the return water main of the floor heating manifold at home.

The installation method is also relatively simple, mainly in the way of parallel connection, the return pipe of the floor heating manifold is installed with two tees, and a valve is installed between the two tees, so as to ensure that the return water main and the circulating pump can be used independently and will not interfere with each other.

Summary. The more water separators in underfloor heating is not the better, but in some interpretations, the more the better. If you consider this problem simply from the floor heating effect, the pipe on the water separator is completely reasonable as long as it is guaranteed to have about 4 times, and his heating will not be so ideal after more, after all, the size of the main heating has been determined, and all the water distribution pipes are just separated from this main pipe, and the heating effect is not very good.

So the reason why it is said that the more the better, in a certain explanation, is because the more pipes under the water divider, the more it means that your home has many rooms, large rooms, and no shortage of money.

Is it better to have more floor heating water separators, and is it better to have more floor heating water separators.

The more water separators in floor heating is not the better, but it can also be pronounced as more in the interpretation of a rent, the better. If you consider this problem simply from the floor heating effect, the pipe on the water separator is completely reasonable as long as it is guaranteed to have about 4 times, and after more, his heating will not be so ideal, after all, the size of the main heating has been determined, and all the water distribution pipes are only separated from this main pipe, and the heating effect is not very good. So the reason why it is said that the more the better, in a certain explanation, is because the more pipes under the water divider, the more it means that your home has many rooms, large rooms, and no shortage of money.

32 square meters living room with 3-way and 2-way water separators: choose a few roads.

3-way. 4 ways too.

4 ways too. You can also.

Summary. The floor heating water separator can be added in the case of a large heating area, but the inlet pipe mouth also needs to be added accordingly.

1. The two water separators must be connected in parallel. 2. Because the two water separators are connected in parallel, the main water supply is the main water supply of each other, and it is not affected by each other, if it is connected in series, there will be the return water of the first water separator, and then enter the water inlet pipe of the second water separator, so as to reduce the temperature of the pipeline of the second water separator. Therefore, the two water separators are still connected in parallel.

Parallel connection is good, with a water separator or parallel connection can not be unified and reduced, this should be based on the actual virtual key, under normal circumstances, the effect of parallel connection is very good, parallel mu ear can make each group of heat even, and each group is equipped with valves to facilitate maintenance, but in case of special circumstances, such as the parallel effect of the door can not reach the heating target, the water difference should be added to increase the flow and increase the heating effect.

The floor heating water separator can be added in the case of a large heating area, but the inlet pipe mouth also needs to be added accordingly.

The function of the water separator is to separate the hot water source into the pipe laid by the ground radiant heating of each road, so as to achieve the purpose of heating and regulating the temperature in the room. When the floor heating is running, it needs low temperature and large flow of circulating water, and the radiator is the circulating water with high temperature and small flow, which causes the radiator and the floor heating to grab water, which will affect the temperature of the floor heating. If you have to connect it, you can connect it to the radiator at the return PPR pipe of the manifold, so that it does not affect the temperature of the floor heating.

The function of the water separator is to separate the hot water source into the pipe laid by the ground radiant heating of each road, so as to achieve the purpose of heating and regulating the temperature in the room. When the floor heating is running, it needs low temperature and large flow of circulating water, and the radiator is the circulating water with high temperature and small flow, which causes the radiator and the floor heating to grab water, which will affect the temperature of the floor heating. If you have to connect it, you can connect it to the radiator at the return PPR pipe of the manifold, so that it does not affect the temperature of the floor heating.

Thank you, the floor heating radiator needs to install the valve, the specific operation is: the corresponding installation valve is on the water supply connection pipe before the water divider, and the valve, filter and drain pipe should be installed in the direction of the water flow. Two valves are set before the water separator, which are mainly used for shutting down when cleaning the filter and replacing or repairing the heat metering device; The filter is designed to prevent impurities from clogging the flow meter and heating tube.

You're welcome, and I wish you a happy life