How much does coal production cost? How much does a ton of coal cost

The cost of production is not high, but the cost of logistics in the coal industry is very high, and nearly half of the market price of coal is freight.

1. Current situation: ** has fallen to a nine-year low.

In terms of data, the CCI1 index (a thermal coal index jointly launched by Platts and Fenwei) represents the spot transaction of 5,500 kcal in Qinhuangdao**, with a high of 620 yuan in 2013, a low of 515 yuan in 2013, a low of 471 yuan in 2014, and a low of 417 yuan in 2015. Basically, it will break "6" in 2013, "5" in 2014, and "4" in 2015. As a variety of only a few hundred yuan, a decrease of 100 yuan per year can be said to be very shocking.

The high point of metallurgical coal in 2013 was 1,360 yuan tons (specifically referring to Liulin No. 4 coal, the same below), the low point was 960 yuan tons, in 2014 it dropped to 750 yuan tons, and in 2015 it is now April, it has dropped to 690 yuan tons, and it will continue to be bearish in the future. The cumulative decline in three years is 480 yuan tons.

Whether it is thermal coal or metallurgical coal, it has fallen to a new low in nine years, basically falling back to before 2007, before 2007, the coal industry was basically a planned economy, with the state to control prices, after the market was liberalized, coal prices were not so low.

The cost of producing one ton of coal is only 300-800 yuan.

China's current national coal production has increased significantly, compared with the previous period of nearly 1.1 million tons, so the later ** will gradually decline, the recent main contract of China's thermal coal for 8 consecutive days, the cumulative decline, which in October 29 ** closed ** is 970 yuan ton, the port 5500k thermal coal closing price is below 1500 yuan ton, the pit mouth 5500k thermal coal ** is below 1200 yuan ton, compared with the previous time have decreased a lot, a week ** nearly 1,000 yuan a ton.

Characteristics of coal.

Coal produces methane gas, which accumulates in the upper part of the cargo hold because methane is lighter than air, and can reach the ** limit when the methane content in the air reaches 4% to 17% (at normal air pressure, the ** limit of methane in the air is 4%-5%, the upper limit is 15%-17%, and the concentration of methane in the air will be the most intense**.

When the oxygen concentration is reduced, the lower limit changes little and the upper limit is significantly reduced, when the oxygen concentration is less than 12%, the mixed gas is degraded), and when it encounters an open flame such as an electric spark or friction spark, a match or a lit cigarette. When the content of dust in coal in the air reaches a certain proportion (generally 10 to 30 grams of cubic centimeters), it will also encounter open flames.

He only made 5 yuan per ton, but only a coal dumper like him dared to release such words now, "If you are not familiar with the industry, you can't make money at all." ”

In the eyes of people in the coal industry, in the middle of the entire coal sales, the extra benefits are, on the one hand, enriching some local finances; On the one hand, some intermediate management institutions, such as administrative units and distribution companies, have been enriched; On the other hand, it is also rich in coal, but compared to these links, the last one is the least rich.

After a long day's effort, I ran for a long time, and I put in a lot of capital, and finally compared to some units to make money without doing anything, it was a bit hard. But in the end, you can still make 5 to 10 dollars a ton. ”

Coal is a solid flammable mineral that was gradually formed by ancient plants buried in the ground and undergoing complex biochemical and physicochemical changes. Coal is known as black gold, the food of industry, it is one of the main energy sources used by the human world since the eighteenth century, and since the beginning of the twenty-first century, although the value of coal is much less than before.

But after all, for a long time, coal is still one of the indispensable energy for our human production and life, and the safety of coal is also related to the stability of China's industry and even the development of all aspects of society, and the safety of coal is also the most important part of China's energy security.

Coal has a wide range of uses, which can be summarized into three main uses according to its purpose: thermal coal, coking coal, coal for coal chemical industry, mainly including coal for gasification, coal for low-temperature dry distillation, coal for hydrogenation and liquefaction, etc.

As can be seen from the definition of product quality, it contains two meanings:

One refers to the characteristics and characteristics of the product itself, that is, the objective attributes of the product.

The other refers to the degree to which the user's needs are met in the process of using the product, that is, the applicability of the product.

When the two are organically combined, the characteristics and characteristics of the product can be fully utilized, and the needs of users can be fully satisfied; The productive purpose of society is realized. If anthracite lump coal is used for the production of synthetic ammonia, the characteristics and applicability of coal have reached a good combination.

However, if anthracite lump coal is used as ordinary boiler fuel, it loses its applicability. It can be seen that the evaluation of product quality is determined by the different needs of users.

100-500 yuan tons, calculate the cost according to various expenses!

The cost of coal mining has a great relationship with geological conditions. There is no correlation between the cost of mining and thermal coal and coking coal, and there is no difference between the two when mining.

The conversion coefficient between raw coal and clean coal is not much related to that of thermal coal and coking coal. Thermal coal and coking coal mainly focus on the coal grade of coal, while the conversion coefficient between raw coal and refined coal is mainly controlled by coal quality and ash content.

The approximate range is as follows: the cost of coal mining is generally 100-500 yuan tons (regardless of thermal coal and coking coal).

The algorithm is: mining cost + labor cost + number of mining divided by tonnage.

The coefficient between raw coal and refined coal is about 60%-90%.

Formula: Cumulative cost per ton of coal = cumulative total cost (cumulative self-production + cumulative purchase) is calculated in accordance with the "Measures for the Cost Management of Coal Industry Enterprises" and combined with the cost calculation method of enterprise financial cost accounting.

Formula: cumulative cost per ton of coal = cumulative total cost (cumulative self-production + cumulative purchased volume), of which the total cost should take into account some costs unique to coal enterprises. For example, the cost of resource acquisition, the cost of environmental governance and compensation input (including the cost of coal mining and backfill, the cost of protection and utilization of the ecological environment and water resources in the mining area), the cost of mine withdrawal or conversion, etc.

Under the full cost method (all costs are taken into account), it can be calculated as follows:

1) Total cost = owner's annual salary + material cost + welfare + annual depreciation expense + annual amortization expense + maintenance fee + security cost + other expenses, etc.

2) Cost per ton of coal = total cost of annual production.

How much does it cost to make a ton of briquette! Hello, glad to answer for you. The cost of producing one ton of coal is only 300-800 yuan.

At present, China's national coal production has increased significantly, an increase of nearly 1.1 million tons compared with some time ago, so the later stage will gradually decline, and the main contract of China's thermal coal has been in China for 8 consecutive days, and the cumulative decline in raw material costs - the cost of purchasing raw coal; 2. Labor cost - workers' wages; 3. Site cost - the rent of the production site; (If the production site originally belongs to itself or a one-time buyout, there is no need to calculate this cost) 4. Tax cost - each enterprise needs to pay various tax fees to the state every year; 5. The cost of binder - the cost of binder to be added in the production process of clean briquette, the proportion of addition is generally 2; 6. Water and electricity costs - electricity consumption and water consumption generated during the operation of the equipment; 7. "Oil" cost - the hydraulic oil to be replaced for regular maintenance of the equipment and the fuel cost when the forklift is loaded; 8. Other expenses - daily necessities, such as: catering, tooling, etc. These are all the costs required to produce a ton of clean briquette, and the comprehensive production cost should not exceed 200 yuan tons, and the current market price of clean briquette is generally between 500-800 yuan tons according to different regions.

Hope mine can help you! Do you have any other questions?

Hello, I am happy to answer for you, according to your question, my reply is that the cost conversion between raw coal and clean coal is as follows: the unit price of raw coal is divided by the ** rate of clean coal, plus your freight and road consumption. In addition, please note that the raw coal does not include tax. There is also the moisture of raw coal.

For example: the raw coal yield of 500 is 75%, the freight is 30 yuan, the road consumption is about 20 yuan, and the moisture of the raw coal is 7. That's 500 75 + 30 + 20 at the selling price of clean coal with 1 point of water!

The sum of the total cost of raw coal input plus all expenses [including direct and indirect costs], excluding the tonnage of clean coal, is the unit cost of the finished product. Of course, if the value of the washed coal is relatively high and the quantity is relatively large, the cost of the coal should also be calculated or estimated separately.

Summary. Hello dear, solve the problem for you immediately, I am sorting out the information, please wait for 1 minute. Regarding your question, I think that the raw coal of the coal washing plant is generally purchased nearby, priced according to the rate of refined coal of coking coal, and the value of raw materials is evaluated according to the theoretical output after the laboratory is fished and sunk, (yield x refined coal market price + yield x medium coal market price - raw coal), the theoretical estimate is usually slightly less than the actual value, and the refined coal index can also dig out a part of the value.

How to calculate the cost between raw coal and refined coal.

Hello dear, solve the problem for you immediately, I am sorting out the information, please wait for 1 minute. Regarding your question, I think that the raw coal of the coal washing plant is generally purchased nearby, priced according to the rate of refined coal of coking coal, and the value of raw materials is evaluated according to the theoretical output after the laboratory is fished and sunk, (yield x refined coal market price + yield x medium coal market price - raw coal), the theoretical estimate is usually slightly less than the actual value, and the refined coal index can also dig out a part of the value.

Wages are best calculated based on the number of employees and the profit contribution of the post. The power cost is calculated based on the power consumption of the equipment and other power losses. The material consumption of the machine should be estimated with reference to the coal washing plant of the same scale.

Usually, the cost of washing per ton of raw coal is between 20-30 yuan. Let's research your peers first, and know more about it.

I hope I can help you, and I wish you a happy life and a smooth work. Thank you!