Can AMD install Win7 now?

Updated on technology 2024-03-20
31 answers
  1. Anonymous users2024-02-07

    1. Win7 system fully supports the CPU produced by AMD. Therefore, in terms of large hardware support, it is possible to install win7. 2. The minimum configuration requirements for win7 are as follows:

    Processor: 1 GHz 32-bit or 64-bit processor Memory: 1 GB and above

    Support DIRECTX 9 128M and above (AERO effect enabled) Hard disk space: 16G or more (main partition, NTFS format) Display: Requires a resolution of 1024x768 pixels and above (below this resolution, some functions cannot be displayed normally), or a display device that can support touch technology.

    If you use AMD ultra-low-level CPU, it is obviously impossible to install, but generally speaking, the mainstream AMD processors can be installed with Win7.

  2. Anonymous users2024-02-06

    AMD has long been able to.

    As for the drive, this thing is completely insignificant, just a bunch of searches.

  3. Anonymous users2024-02-05

    Method steps.

    1Open the control panel and check if the AMD graphics card driver has been installed. If it is installed, make sure that the driver installation version of your ** corresponds to the system you are currently using, and also pay attention to 32bit and 64bit.

    2. To install AMD drivers or upgrade drivers, you must completely uninstall the old drivers first, otherwise some features will not take effect (when installing the ghost system, the universal driver installed by default may not be compatible with your laptop).

    3Open the control panel, find the installed AMD driver, right-click - Change, and enter the AMD graphics card driver installer.

    Please click Enter a description.

    4 Click Next - Quick Uninstall - Next.

    Please click Enter a description.

    Please click Enter a description.

    5After uninstalling, tap Done, and then restart the computer.

    Please click Enter a description.

    6** - Install DriverSweeper and use the Driver Sweeper software to clean up the AMD driver. As shown in the figure, restart the computer after clearing all of them.

    Please click Enter a description.

    Please click Enter a description.

    Please click Enter a description.

    8. Select Quick Install.

    Please click Enter a description.

    Please click Enter a description.

    9. After the installation is completed, right-click the mouse on the desktop of the computer - configure the exchangeable graphics card.

    Please click Enter a description.

    Please click Enter a description.

    10. Change the software that needs to be run to a high-performance graphics card to run and then click Apply. That's it.

  4. Anonymous users2024-02-04

    Both win7 and win10 can be installed.

    AMD is the model of the CPU in the computer, regardless of what kind of operating system is installed, the installation of the operating system is related to the main frequency and memory of the CPU, the main frequency of the general computer, and there is 4GB of memory, and the 64-bit operating system can be installed; 2GB of RAM can only fit a 32-bit operating system.

  5. Anonymous users2024-02-03

    AND is the model of the CPU in the computer, regardless of what kind of operating system is installed. The installation of the operating system is related to the main frequency and memory of the CPU, the main frequency of the general computer, and there is 4GB of memory, which can install a 64-bit operating system; 2GB of RAM can only fit a 32-bit operating system. If you want to play big games, you need to choose a good graphics card.

    Both win7 and win10 can be installed.

  6. Anonymous users2024-02-02

    Yes,Absolutely,Win7The requirements for the processor are not too high,It's not too garbage.,It's mainly memory.,It's about 500M when you turn it on.,You're 2G enough.。

  7. Anonymous users2024-02-01

    I can install it.

    However, it cannot be activated.

    It can only be used for 30 days.

    I installed it yesterday.

    It cannot be turned on after activation.

    I've already suffered a loss.

  8. Anonymous users2024-01-31

    The processor is satisfied,Install win7The standard is memory4G,Smooth is8G,Meet these 2 conditions can be installed。

  9. Anonymous users2024-01-30

    My suggestion:

    Repartitioning, setting the activation partition; Format each partition in NT format.

    If it is still an old problem, it is recommended to replace a hard disk and then install it, generally speaking, the 3 hardware factors that fail the most are hard disks, memory, and motherboards, because these 3 sometimes have compatibility problems. Try replacing them one after the other.

  10. Anonymous users2024-01-29

    1. Win7 system fully supports the CPU produced by AMD. Therefore, in terms of large hardware support, it is possible to install win7.

    2. The minimum configuration requirements of win7 are as follows: processor: 1 GHz 32-bit or 64-bit processor memory

    1 GB and above: DirectX 9 128M and above (Aero effect is enabled.) If you use AMD's ultra-low-level CPU, it obviously can't be installed

  11. Anonymous users2024-01-28

    There could be two reasons for the feeling

    Hardware compatibility issues (unplug a memory to try, and in addition, restore the BIOS);

    The hard drive has bad sectors.

  12. Anonymous users2024-01-27

    When did you buy the computer? Try to find the previous windows 7 image to install it.

    You can mount the hard disk on other computers, install the system, and replace it with this computer after installation, if you can boot halfway, but can not start completely, it may be a hardware or driver problem, shut down first, and then try to enter safe mode after booting, if you can enter safe mode, generally speaking, it is a driver problem, just uninstall the relevant driver to try.

  13. Anonymous users2024-01-26

    First of all, it could be a hardware issue. From experience, there should be a problem with the memory or hard disk, you can try to replace it, the reason is very simple, you can turn on the CPU motherboard is fine, XP occupies less memory and hard disk space, if the memory or hard disk is damaged, because the XP system can not use the damaged area! Therefore, it cannot be detected (for example, the memory is damaged when it is 2G, and XP is only used, so it cannot be detected) Once it occupies the corresponding damaged capacity, an error is reported.

  14. Anonymous users2024-01-25

    You do it with pure ISO.,Enter the PE to open the image installation of the kind.,Or write the image to the U disk U disk to start the step-by-step installation,Partition in the installer.。 Try.

  15. Anonymous users2024-01-24

    According to my personal experience, this situation may also be a memory problem, for example, there is a bad contact or not working properly, and various interfaces including each power supply plug and buckle hard disk data interface, etc., all plug and unplug and clean, CPU radiator fan, etc., should solve the problem.

  16. Anonymous users2024-01-23

    Repartition the hard drive, select the GUID partition mode, and reinstall it.

    You can install xp, which means that you didn't turn the partition into a guid partition, so you can't install it.

    In PE, use the partition tool to select the GUID partition, and once you go in, it will be roughly in the middle of the left side of the software.

  17. Anonymous users2024-01-22

    1. First of all, make the USB flash drive into a boot disk, restart the computer and wait for the boot screen to appear, press the startup shortcut key, enter the main menu, select the option of "Run Win8PE Installed Version", and press the Enter key to confirm.

    2. Enter the Win8PE system, the installation tool will pop up by itself, click "Browse" to select the Win7 image file in the U disk.

    3. Wait for the win7 system image package installation file to be loaded, just select the installation disk location, and then click the "OK" button.

    4. At this time, click the "OK" button directly in the pop-up prompt window.

    5. Then the installation tool starts to work, please wait patiently for a few minutes.

    6. After completion, a prompt will pop up to restart the computer, click the "Yes (Y)" button.

    7. At this time, you can unplug the U disk, restart the system to start the installation, no need to operate, wait for the installation to be completed, and finally restart it before entering the system desktop.

  18. Anonymous users2024-01-21

    Hello friends:

    Listen to what you say, it should be a memory problem, you dial out the memory, erase it with an eraser, and then insert it back in a different slot, install the machine, and then install the system, it is possible to solve it.

    Hope it helps you and I wish you happiness

  19. Anonymous users2024-01-20

    As long as it is the software that is normally circulated and sold on the market, no matter which one, it can be installed on the computer normally, but the version is different, the function is slightly different, but there is no problem with normal operation.

  20. Anonymous users2024-01-19

    It's hard to say.,It may be your win7 version problem.,To use the installation version.,Ghost doesn't work.。 There is also a possibility that there is a problem with your BIOS settings. Or maybe there's something wrong with your hardware.

    Try to update the BIOS first, reset the settings, and then change to Win7.

  21. Anonymous users2024-01-18

    Brother, if you use the SSD to install,It is recommended that you use software to check this SSD,Or replace it with other hard disks to install it,General SSD hardware problems will appear in your kind of supernatural events,Generally not a hardware problemWin7 is generally easy to install。

  22. Anonymous users2024-01-17

    Hard disk?? If you're using an HDD, switch to a solid-state one.

    In addition, it is recommended to install the system with PE. There is also a motherboard BIOS update.

    I don't know the motherboard model, it is estimated that it should only be able to install win7 win10, and there may be no driver.

  23. Anonymous users2024-01-16

    Listening to you say that, it feels like a motherboard issue.

    You go online to check how to update the firmware of this motherboard.

    Update the motherboard firmware using PE or XP systems.

    Install win7 in

    If it doesn't work, then I still suggest you change the motherboard + CPU + memory set.

  24. Anonymous users2024-01-15

    Hard disk mode change IDE, if you say that you have changed the hard disk mode, then this may have something to do with the motherboard. I've tried some motherboards with win7 64-bit and it doesn't work, there will be problems in the process, and win7 32-bit is normal. You're the same!

  25. Anonymous users2024-01-14

    Skip driver installation during installation.

    After entering the system, use the driver wizard to install the driver, install a driver, and restart it once.

    Support appears that the installation of a driver fails to start, so the problem is found.

  26. Anonymous users2024-01-13

    It's not recommended to install.,The driver or something is not necessarily reliable.,You may regret it if you install it.,Originally, 7 stopped updating.,It won't be too good to optimize this platform.。

  27. Anonymous users2024-01-12

    It's not that hard, you short connect the pins of the BIOS on the motherboard, restore the initial configuration, and it's basically solved, the problem is still the same, then change the system version, and if it hasn't been solved, it's your hardware problem.

  28. Anonymous users2024-01-11

    Before reinstalling the system win7.

    First of all, before reinstalling the system, you need to back up or transfer the important data in the computer, and according to your own situation, move some more important files to other disks (as long as it is not a C drive).

    Then it's time to reinstall the system!

    Start reinstalling the system win7

    2.Let's start to reinstall the system win7,3.The first is to turn on OneKey Ghost

    4.Next, select Restore Partition in OneKey Ghost, and select the Win7 system image in the GHO Wim ISO image path, 5Select Restore to C drive below (Note:

    It is to click on the C drive below, and it will turn blue after clicking), and then click OK.

    6.After clicking OK, a prompt box will appear, asking if you want to restart, click Yes.

    7.Then the system will restart, and after the restart, an interface will appear, you don't need to do anything, just wait patiently for the progress bar to finish.

    8.Then reinstall the system win7 is completed,The next thing will be into the windows system,The system will be installed automatically,The same does not need to do anything,Wait for the desktop to enter,The reinstallation of the system is complete。

    After reinstalling the system win7.

    1.After reinstalling the system win7, you need to activate the system.

    2.To activate the tool, on the desktop, click Activate.

    3.Adjust the system settings according to your usage habits.

    Such as resolution, desktop, firewall, user control, etc., to the control panel settings.

    5.At this point, the reinstallation of the system win7 is complete. You can use it normally!

  29. Anonymous users2024-01-10

    There shouldn't be a problem, as long as the CPU, motherboard, and graphics card of AMD are booted and installed correctly, they can all work normally under the Windows 7 system.

  30. Anonymous users2024-01-09

    As long as the computer is complete, it can be downloaded.

  31. Anonymous users2024-01-08

    You can install the ultimate version of the operating system of Win7.

    a.Computer CPU Pentium 4 or above, memory: between 1GB-3GB, it is recommended to choose Windows7-32bit.

    b.The computer configuration meets the requirements of more than dual-core CPU (as long as it meets the dual core) and at least 4GB or more than 4GB of memory, it is strongly recommended that the landlord choose the win7-64-bit flagship version of the system!

    According to your computer configuration, it is suitable for installing win7 64-bit operating system.

    Use the computer hard disk to install the system, you can install the win7 system, the specific operation is as follows:1First go to the win7 ultimate base.

    3.Open the unzipped folder, double-click "Gho Image Installer", and in the window that opens, click "Install".Can.

    4.In the window that appears, the ghost image file path will be automatically added, select the partition that needs to be restored to, the default is the C drive, and click the "OK" button to install it automatically.

Related questions
7 answers2024-03-20

At present, Microsoft itself does not have the ability to do this!

10 answers2024-03-20

Let's talk about the partition problem of the C disk first: you can partition it under window7, my computer right-click "Manage" - find the "Disk Management" under "Storage" - find the C disk - right-click, select "Compress Volume" - wait for a while (system calculation), and then follow the prompts and the size settings you want. >>>More

5 answers2024-03-20

This You can next win10 upgrade assistant (qq computer manager) there is whether your computer meets the conditions for upgrading win10,Generally as long as you are genuine win7 can be upgraded。 >>>More

4 answers2024-03-20

Win7 system does not come with a timer shutdown software,This makes everyone a headache。 But you can set a scheduled shutdown under the win7 system. >>>More

5 answers2024-03-20

3.Install** to then follow the prompts to operate,During the windowsupdate will be automatically opened,**The corresponding program needs to wait patiently** to complete,Then it will be installed by itself! The process prompts the installation of the first patch,In fact, after the installation is completed,It will start the first win10 and start to officially install win10 to 99% will be stuck for a period of time,Just wait patiently! >>>More