How to apply car film by yourself? How to wrap a car?

How is car wrap implemented? What are the technologies for car wraps? How to apply film to a car?

I believe that many car owners and friends are very curious about the car film technology, how the car film is pasted on the car, today, please follow the car2100 evaluation center, together to decipher the whole process of car film technology:

The first step is to prepare for the car film: cleaning and installing interior protection.

In order to prevent the production of tiny impurities during the film, the car is usually cleaned all over the body when the car film is applied, first take a look at the car windows before the car film:

Car film technology tutorial How to apply car film.

CAR2100 reminds everyone that the car interior must be protected before the car film, especially for new cars; Because it is inevitable that the car interior will be soiled during the film application process, it is necessary to prepare for it in the early stage

Car film technology tutorial How to apply car film.

The second step is to tailor the car film according to the size of the window.

Film cutting is an important process of car film; According to the CAR2100 evaluation, the size of the car film is generally determined according to the specific size of the window, and the size is slightly larger than the size of the window.

Car film technology tutorial How to apply car film.

The third step is the cleaning of the front and rear windshields.

In addition to vehicle cleaning, the CAR2100 evaluation center would like to remind everyone that it is also necessary to carefully clean the window glass again; When cleaning, the car is generally scraped repeatedly with two kinds of scrapers (hard scraper and soft scraper). Now the car film will be operated in the dust-free workshop, which is also to prevent impurities from being generated in the car film and affecting the effect of the film

Car film technology tutorial How to apply car film.

Step 4: Wrap and bake film, wet film.

When cutting the film, the staff will spray soapy water on the car window glass, so that in order to better paste the car film, after the adhesive layer of the car film is uncovered, it should be carefully glued to the inside of the car window, and the edge distance between the car film and the car window should be adjusted under the lubrication of soapy water to ensure the overall appearance.

Car film technology tutorial How to apply car film.

The film has officially begun.

Car film technology tutorial How to apply car film.

The baking film in the film is mainly to fix the car film and shape the car film by heating

Car film technology tutorial How to apply car film.

After the film is completed, the staff will also check the effect of the film, on the one hand, it is to cut the corners; On the other hand, the staff will use the car2100 scraper to scrape out the remaining blisters in the film, so that the car film and the window glass are completely fitted. After that, wipe the removed water stains with a towel with excellent water absorption, and the finished car film and car film can create a perfect mirror effect.

How it works:

First we take a watering can, then fill the watering can with water and set aside, you can also add some cleaning agent to the water.

Then we spray water on the piece of glass that we want to attach to the car film, and after spraying the water, we want to cut the approximate size of the film first.

Attach the film to the glass sprayed with water, aligning the lower edges at a certain distance. As for the front and back, you can come out a little more first, and then cut it off.

Then the film is specifically cut, and the knife is cut along the edge of the glass. When cutting, you can shake the glass down a little to facilitate operation. (Note: The car film is divided into positive film and secondary film, and the front of the adhesive must be facing the car glass.) ）

Finally, open the car door, rinse the inside of the glass repeatedly with water in the watering can and scraper, pay attention to be sure to clean it, otherwise it is easy to have dirty things inside, and it will be even more difficult to clean up after a long time.

Once the glass is clean, spray with a little water. Then uncover the film that has just been prepared, and spray a little water on the film by the way, otherwise the glue on it is easy to fix when pasting, and it is easy to stick crookedly. Then align the membrane glass and stick it on, and then snap the edge into the gap.

Once the position of the membrane has been determined, spray water on top of the film with a watering can and scrape it flat with a scraper. When scraping, we can use the leftover plastic film as a protective cover to avoid the car film just pasted from being scratched by the scraper.

So that the car film is pasted, and the remaining glass can be completed according to this method.

Note: In the last step, the water should be scraped downwards, not to the side.

1. In order to avoid dust and impurities affecting the effect of the film, the body glass should be cleaned first before the car film.

2. The parts that may be damaged during the car film should be covered in advance to prevent scratching the car paint, interior and other parts; Accessories that may affect construction also need to be disassembled in advance.

3. After the overall treatment of the car body, it is necessary to start cutting the car film, and the car film should be preliminarily cut according to the size of the glass.

How to paste car glass film.

4. Paste the roughly cut car film on the car glass, and then the front and rear gears need to bake the film according to the amplitude of the car glass, and the effect is to make the amplitude of the car film close to the glass, so that the car film will be flat and free of water marks.

5. After baking, the film will be very obediently attached to the glass, and then it is necessary to make further corrections, that is, according to the shape of the glass, the corresponding shape will be finely cut.

6. The glass film is pasted inside, so the key step is to put on the film, and the requirement of the upper mold is to clean the inside of the glass, which is fast and accurate, and pushes out the moisture as soon as possible.

7. After all the work is done, the last need to do an inspection work, after the whole vehicle is pasted, the situation of each window should be checked, especially the corners, and the blistering phenomenon should be dealt with immediately.

The steps of car wrapping are as follows:

1. Spread the sun film on the front windshield first, then blow it with a hair dryer to deform it, and smooth the sun film by hand while blowing to make it extend, which can fit the curvature of the glass.

2. Use a special tool to scrape the solar film flat, so that the film completely fits the front windshield. Use a knife to cut the film into the desired shape, and then remove the various annual inspection signs attached to the windshield.

3. Gently take off the film that has been extended and cut the shape, spray the mixture of water and washing spirit on the front windshield, and then wipe all the dirty things on the glass, and then spray the mixture of water and washing spirit after wiping it clean.

4. Tear off the adhesive and gently stick the film on the glass stained with water and washing spirit mixture according to the shape cut before. Use a tool to expel all the water and bubbles between the solar film and the glass.

1.To clean the glass, spray a small amount of mounting fluid on the outer surface of the glass, cover the window film on it, and cut the window film along the border.

2.The window film is precisely shaped and shrunk with a portable heat gun, and after the thermal shaping is completed, the inner surface is cleaned with a strong liquid cleaning agent, and the oil is scrubbed with a nylon soft wipe sheet.

3.Tear off the protective film, spray the installation liquid on the surface of the window film and the inner surface of the glass, paste the window film on the glass, spray the installation liquid again after positioning, and discharge the installation liquid with a special tool.

The effects of car wrapping are as follows:

1. Heat insulation and sun protection, the film can well block a large amount of heat generated by infrared rays;

2. Ultraviolet insulation, the medium and long waves in ultraviolet rays can penetrate very thick glass, and the heat insulation film can block most of the ultraviolet rays, prevent damage, and slow down the aging of automobile interiors;

3. Safety and explosion-proof, the base layer of the car film is polyester film, which has the function of tear resistance and anti-breakdown, plus the adhesive layer of the film, the strength of the glass after the film can prevent the damage caused by accidental glass breakage to the personnel in the vehicle;

4. Create a private space, choose the right variety of film, and after choosing the right kind of film, you can not see the inside of the car clearly, but you can see the outside of the car clearly in the car, and retain privacy and security;

5. Increase the appearance, according to personal preferences, the beautiful car can be personalized through the film;

6. Anti-glare, reduce accidents caused by glare factors.