How does Xiaomi router reset work?

1. Press and hold the reset reset button to reset.

1. On the body of the Xiaomi router, there is a reset button, and the button is marked with English: reset, as shown in the figure below.

Long press the reset button to reset the Xiaomi router.

Some users say that there is no reset button on the Xiaomi router, and there is a small hole on the top of reset.

In fact, the reset button is in this small hole, and you need to use a toothpick, pen tip and other objects to press and hold the reset button inside. The reason why the reset button is placed in the small hole is to avoid everyone from misoperation.

2. With the Mi router plugged in, keep pressing and holding the reset button for more than 10 seconds, and you can restore this Mi router to factory settings (reset).

2. Log in to the settings page to reset.

1. Open the login page.

Enter "Manage password" in the browser to log in to the settings page of the Xiaomi router.

Open the Mi Router login page.

Pay attention to the problem: the solution to the Xiaomi router landing page that cannot be opened.

2) If you forget the "management password" of this Xiaomi router, you can't log in to the settings page. Then please reset this Xiaomi router by long-pressing the reset reset button.

2. Reset the Mi router.

Open "Common Settings" - "System Status" - click "Restore Now", and you can reset this Xiaomi router.

On the Settings page, reset your Mi router.

Summary: If you forgot the "Manage Password", you can only reset this Xiaomi router by long-pressing the reset reset button.

If you remember to "manage password", you can log in to the settings page, then the above 2 methods can be used to reset the Xiaomi router.

You see there's a small hole on the side of the plugged wire, and the setting is reset by poking it with a toothpick for 3-5 seconds.

There are four ways to reset your Xiaomi router:

1.Press and hold the reset hole button of the router with the card pin for 5-8 seconds, wait for the router indicator to turn orange from blue, let go, and wait for the router to turn blue again to restore successfully.

The reset hole button is generally on the back of the machine, and the hole button is generally marked with "reset" below

3.Mi router management background.

Common Settings - System Status - Factory Reset.

4.Mi family.

You can log in according to the login method marked on the router body and restore the factory settings.

1.Press and hold the reset hole button of the router with a card pin for 5-8 seconds, wait for the router indicator to turn orange from blue, and let go;

3.The Mi Router Management Background --- common settings--- system status--- factory reset.

Here's how to reset the Xiaomi wifi router:

Mobile: iphone13

System: ios13

Software: Mi WiFi

1. Press and hold the reset hole of the router with a card pin, press the button for 5 to 8 seconds, wait for the router indicator to turn orange from blue, let go, wait for the router to turn blue again after letting go, that is, the recovery is successful, reset the hole, the button is generally on the back of the machine, in the hole, and the button will generally be marked "reset".

2. Mi WiFiAPP (partially supported): Xiaomi WiFiAPP, Toolbox, Routing Settings, Hardware & System, Factory Reset, Mi Router Management Background, Common Settings, System Status, Factory Reset

How to factory reset your Xiaomi router

The Xiaomi factory reset button is hidden in the heat dissipation hole on the back, write reset and hit the hole next to the arrow, insert a needle or toothpick into the reset hole, press and hold it for ten seconds, the router will restart, the signal indicator will turn yellow, the display is restarting, and the recovery will be completed when it turns green.

Enter in the address bar of the browser, enter the router management interface, and reset the parameters. After reading the agreement, click Confirm, enter the broadband account and password provided by the operator, then set the name and password of the wireless network, and finally set the password of the management background to log in to the Mi router, and then click Configuration Complete.

Reset means to reset the password, for example, password reset is to reset the password to zero, reset it, restart it, or restore all parameters to factory settings. Here is the Xiaomi router reset settings that I brought you, welcome to read.

How to reset the Xiaomi router after resetting

First of all, reset the router initially, restore the factory settings (very important), and then connect the computer network card with the LAN port of the router with a network cable, and turn on the power of the router; computer network card settings;

Enter the default username: admin and the default password: admin; Click OK.

1. Set up dialing:

Click Setup Wizard in the left rail, click Next;

Click on ADSL Virtual Dialing (PPPoE) and click Next;

Enter the bandwidth, password, and click Next;

2. Set the wireless wifi password

There is also an option on the left in the wireless setting, there is an SSID, this is wifi wireless, there is a password setting after setting, the password is as complex as possible, the best alphanumeric symbol combination;

3. Set a login password.

Change the default admin and admin login passwords to prevent someone from breaking the password and modifying the router after rubbing the network.

Click Save and restart, and you're done.

There are two ways to reset your router

That. 1. Hard reset The hard reset method of the router is to use a thinner one'Object: Press and hold the reset button on the back of the router for 8 seconds to reset the router. Resetting your router will not erase the personal data stored on your hard drive, it will reset all your settings.

That. 2. Soft reset (need to log in to the router to operate).

If the Xiaomi router changes places, you can reset it by resetting the router.

Here's how:

1.Press the "reset" hole on the back of the router to reset the Xiaomi router.

2.Open the webpage and type.

3.Enter the administrator password to enter the router settings page.

4.Select "Internet Access" in the "Routing Settings" menu bar on the left, select "Internet Access Mode" as "Broadband Dial-up Online" in "Basic Settings", and then enter your "Broadband" and "Broadband Password".

5.In "Advanced Settings", set the "Dial Mode" to "Auto-select dialing mode", select "Connection Mode" to "Auto-connect, connect when the phone is turned on and disconnected", and finally click "Save" in the lower right corner.

6.Go back to "Routing Settings" and go to "Wireless Settings". Select "Wireless Settings" as shown in the figure, fill in the "Wireless Name" and "Wireless Password" you want to set as required, set "Wireless Channel" and "Frequency Band Bandwidth" to "Automatic", and then click "Save".

7.If the router supports "5G wireless settings", you can also set it up like in the previous step, and then click "Save".

Because the login password of the Xiaomi router is set once, it is rarely needed again,Many friends will forget,Instead of racking their brains to find a way,It is better to give the router a factory setting to be fast,So how to reset the Xiaomi router?

Method 1: Find the reset button on your Xiaomi router to reset Jingwei. Press and hold the reset hole button of the router with a card pin for 5-8 seconds, wait for the router indicator to turn orange from blue, and let go; ）

Method 2: Set up your phone and reset your router to factory settings.

1. Open Xiaomi WiFi, click [Brother Chao Toolbox], 2. Click [Routing Settings], 3. Click [Hardware & System], 4. Click [Factory Reset].

This article takes Xiaomi Mi 10 && Mi Router 4A as an example for MIUI11 system Xiaomi WiFi version.

Summary. Dear, hello, I'm glad to answer for you, how to reset Xiaomi router The solution is as follows; 1. When the Mi router is powered on, use the pin or toothpick against the [Reset] button next to the router interface until the router flashes, indicating that the reset is successful. 2. Connect the Xiaomi router wifi on the Windows 10 system computer (you can connect without a password after resetting the router), and the browser will automatically open the router management background.

3. Reset the router's administrator password, broadband password, and wifi password to reuse. I hope it can help you and I wish you a happy life.

How to reset a Xiaomi router.

Dear, hello, I'm glad to answer for you, how to reset Xiaomi router The solution is as follows; 1. When the Mi router is powered on, use the pin or toothpick against the [Reset] button next to the router interface until the router flashes, indicating that the reset is successful. 2. Connect the Xiaomi router wifi on the Windows 10 system computer (you can connect without a password after resetting the router), and the browser will automatically open the router management background. 3. Reset the router's administrator password, broadband password, and wifi password to reuse.

I hope it can help you and I wish you a happy life.

How to unbind. 1.Find the routing settings in the Mi WiFi Toolbox interface. 2.After entering, find the unbind router on the interface. 3.In the pop-up interface, click Unbind to successfully operate.

The two blue ones lit up, and they couldn't connect to the network.

1. Set the frequency band - first open the browser and enter the IP address to enter the router management page, at this time you need to enter the user name and password to log in, after logging in successfully, click on the "wireless settings" option on the left, and then click on the "advanced wireless settings" option, after which we can modify the frequency band of wifi. It should be noted that at present, only the wireless frequency band can be modified to 5GHz frequency band. 2. Reset the router -- the reset hole behind the router device is the reset hole, you can use the card pin to insert this small hole, you can restore the router to factory settings after 1-2 seconds, at this time, you need to reset it after connecting the router again, and you also need to enter the broadband and password.

3. Modify DNS on wireless LAN -- we check the router login address and login username and password on the back of the router, then open the browser and enter the official address, and then enter the username and password in the pop-up dialog box. After logging in, we select the "Running Status" option, and on the right we can see the DNS address of the WAN port. If we want to change the DNS address, we click on the "Network Parameters" option, and then click on the "LAN Port Settings" option, and then we can change the DNS to.

Reset for a few seconds. 1-2 seconds.

Here's how:

2.Once you're logged in, click Route Settings.

Here's how to set up <>:

1.Open the address bar of your computer's browser, then enter or, enter the Mi Router mini settings interface, and then click [Start], as shown in the figure below.

2.Next, you need to enter the Internet broadband and password, this password is the broadband password provided by the network operator, generally when pulling the network cable, the network operator will tell you, if you have forgotten, you can contact the operator to obtain.

3.After completing the Internet settings, the next step is to create a wifi wireless network hotspot, here we need to create a wifi wireless password and management password, here is the registration to create, you need to enter a password that is easy to remember.

4.Through the above settings, the Xiaomi router mini is basically set up, and we can also use the mobile phone *** to scan and install the mobile phone client, as shown in the figure. At this point we can start surfing the web and our smartphone will be able to connect to the wifi network that we have just created, just by entering the password we have just created.