What can be done to solve the black screen of Acer notebook boot?

ThreeMethod:1. BIOS settingsInappropriate(Restore the BIOS.)Factory settings

2. System filessabotageRevertsystem orReloadsystem);

WrongOperation (EnterSafe mode(Power on.)Keep pressing F8>Select".The last time it was configured correctlyThat's it

If the screen is black, if the display is not broken, it depends on whether there is a system, if there is no system, then you can only install the system.

The causes and solutions of the black screen of the acer notebook are as follows:1After the laptop turns on the black screen, climb it for a while to see if you can hear the boot sound (the sound is on before the last shutdown.)

If the Acer laptop has a black screen when it is turned on, you can turn it off and restart it or remove the battery. Then reboot.

If the laptop screen is black, our most fundamental solution is to shut it down.

Then force the computer to start again, see if it can be solved, if it can't be solved, then redo the computer system.

Yes, try a factory reset and see if it should be fine.

There can be many reasons for a black screen, and it is best to find a professional repairer to check.

If the screen is black, you can flash the phone directly, otherwise it is generally not possible.

If you have an Acer laptop, then under normal circumstances, if the screen is black, then at this time, you need to flash the phone. Generally come.

How to solve the black screen when the Acer notebook starts? Hello dear<> sometimes after installing some software or hardware drivers, you find that after restarting, the computer can't enter the system, and the screen has been black, which is the black screen of the notebook caused by the software. If it is due to software causing hacking.

Once the System Boot Options menu comes out, select Enter Safe Mode. If we can enter the safe mode normally, we can delete the software or driver installed before the black screen in the safe mode. Then re-do it.

Hardware-induced laptop black screen. On laptops, there is a sensor switch, when we close the screen, the display will automatically turn off, thus saving power consumption. Some laptops are mechanically touched, such as when the screen is closed, it will touch it.

There are many reasons for the black screen caused by hardware. Let's talk about the cause of static electricity first, sometimes static electricity will cause the circuit of the notebook motherboard to be abnormal, resulting in no reaction on the screen after the power is turned on. Hope it helps.

How to solve the black screen when the Acer notebook starts? Hello dear, 1. First recall whether you have ever adjusted the refresh rate or display resolution, you can press [F8] a few more times when you boot up, and select [Safe Mode] in the system's [Boot Menu]; 2. After selecting the security mode, you can generally enter the system normally, first click the right-click menu on the desktop, select [Screen Resolution], you can see [Resolution] after entering, and select the resolution of [Recommended] in the drop-down menu; Click [Application] and [OK] below to restart to enter the system; 3. If you can't enter the safe mode, it may be due to hardware problems, you can take the notebook apart, take out the memory module and clean up the gold finger; 4. Check whether the screen panel has bright light, even if the screen is black, there will be bright light in the background, if there is no bright light, it may be due to the failure of the screen panel or the first cable; I hope I can help you! If my answer is helpful to you, please give a thumbs up (comment in the lower left corner), look forward to your like, your efforts are very important to me, your support is also the motivation for my progress, and finally I wish you good health and a happy mood!

If your computer won't boot up to a normal desktop, reinstalling the system is the best way to do it.

If you can boot it to a normal desktop, you can restore the system, you can use the 360 system first aid kit to try, I have used it to solve the black screen problem.

You can also try to kill the Trojan repeatedly.

Reason 1: The screen will go black if the display is not in good contact.

Solution: You remove and clean up the interface behind the monitor connection to the main chassis, and try to connect it again, be careful not to connect the interface in reverse. If the contact is okay and it doesn't work, it's best to try a different monitor to determine if there is a problem with the monitor.

Reason 2: The memory module will go black if it is not in good contact.

Solution: If the memory module is faulty, there will generally be a beep long and short alarm sound, if there is an alarm sound, you open the case and take out the memory module to clean it with anhydrous alcohol or eraser, re-plug it once or try to change the slot, be careful not to insert the memory module in reverse.

Reason 3: The graphics card will go black if it is not in good contact. You remove the graphics card, clean it up, and try it back. If the contact is okay, it is best to ask someone to borrow one and try another graphics card to determine if it is a graphics card problem.

1. The reason why the laptop boots up with a black screen.

There are many reasons for a laptop black screen, and the common reasons for a black screen are:

1. Poor contact of display data line;

2. Poor contact of the graphics card or;

3. Poor CPU contact and overheating;

4. Poor contact of memory modules;

5. Poor power supply performance;

6. The machine is infected with a virus, and the BIOS is destructively refreshed;

2. How to fix the black screen of the laptop.

1. The boot display screen is black, only the indicator light is on, and the host does not have any reaction. I can't feel the fan spinning behind my hand behind the main unit. None of the voltages are measured. Remove it and find that the power adjustment tube is broken, and replace it with normal.

2. The power supply and CPU fan are normal, but the screen has no reflection, and there is no self-test sound. This machine adopts SLOT1 structure, and the CPU is easy to contact poorly, so it is sent to the after-sales service for inspection and maintenance.

3. Do not self-check when you turn on the machine, and check that the power supply is normal. Using the minimal system method, the machine can start normally when the optical drive is unplugged. Then install the fault recurrence. It means that there is a problem with the optical drive, and the machine cannot be started. It should be sent to the after-sales service immediately for disposal.