What s going on with the printer keeps flashing after a paper jam

Here's how:1Remove any remaining paper from the feeder and open the feeder cover.

2.Gently remove the jammed paper from the feeder.

3.Close the feeder lid and reload the removed paper (if any) into the feeder.

4.Open the scanner cover, grasp the mis-sent paper, and carefully pull it to the right with both hands to remove it from the paper feed area.

5.Close the scanner cover and reload the removed paper into the feeder.

The printer has reported an error, check whether the paper media of the card is cleaned up, whether the cover is covered, and you can check the information of the flashing light against the manual.

When you cancel the print, did you click offline?

Reinstall the software on the CD-ROM again.

Every printer will have a paper jam, when it is confirmed that the printing medium meets the requirements of the manual, it can be solved according to the actual situation, focusing on the following four parts:

First, the printer can't rub the paper, and the paper doesn't move at all, so it reports the jam. Try to see if the rubbing wheel is dirty, or if there are small pieces of paper in the feed tunnel that are blocking the paper from moving forward.

Second, the printer paper is jammed as soon as it enters, you can gently take out the paper in the direction of the paper path, and do not use too much force to cause damage to the sensor. After taking out the paper, if you can't print normally, you can also observe whether there is any foreign matter in the position of the jammed paper and remove it.

3. The printer paper is stuck under the heating roller, and the paper is stuck when it is about to come out. You can take out the paper gently in the direction of the paper path first, and do not use too much force to cause the sensor to break. If you can't print normally after taking out the paper, you can also observe the position of the jammed paper and remove any foreign objects.

Fourth, the printer is stuck under the compact every time. Please replace the compact, if there is still a problem, it may be a problem with other machinery, it is recommended to send it for repair.

The printer is alarming, did you get the paper out of the jammed paper?

Hello dear! We'll be happy to answer for you! Here's the answer:

1.Check the cartridge. Open the top cover of the printer, and if the cartridge trolley is able to move the key from the side to the middle position, remove one of the cartridges, and then close the top cover to check.

If the printer's power indicator is solid back, the cartridge you removed is faulty and you can replace it. If the power indicator of the printer is still flashing, you can install the removed ink cartridge into the printer, take out the other ink cartridge, close the top cover for inspection, if the printer's electrical manuscript Qingyuan shirt elimination indicator is still flashing, it means that there is a problem with both ink cartridges of the printer. Replace them all; 2.

Check if the printer is jammed. If the paper is jammed, you can open the back cover of the printer, see the paper and slowly take it out; 3.Check if the printer is out of paper.

Press the power button of the printer to confirm if the printer is flashing because it is out of paper, and if so, add paper.

Summary. 1. If the power light goes out and the ink lamp and the paper shortage lamp flash at the same time when the printer is turned on, the print head may not be able to return to its position because there are foreign objects inside the printer. 2. If it is a new product, please make sure that the blue tape inside and outside the product has been removed, turn off the power of the printer, open the printer cover, and take out the printing paper or other obstructions from the paper feeding channel.

3. Check whether the cartridge hatch cover is tightly closed: open the cartridge hatch cover, push the cartridge down until it locks into place (with a click), and close the cartridge hatch cover until it clicks. 4. Turn the printer back on and check whether the indicator status is back to normal.

The printer boot light and water drop light are flashing all the time.

The first point may be that there is a paper jam in the printer, so you just need to pull out the paper; The second point may be that there is a foreign body in the printer, as long as the foreign body is matched; The third point may be that the printer is short of ink or the ink cartridge is not covered, so check the ink cartridge and make the corresponding treatment.

Printed, I'm a printer, but there is no response when I press the copy button.

Hello, this is related to the ink tank, there may be several reasons: 1,. It may be that there is no ink left, add ink and try it.

If the nozzle is blocked, rub it with alcohol only. 2。It may be that the cartridge is not installed, this possibility is relatively small, remove and reinstall it to see if it can solve the problem 3.

The cartridge is broken, and the orange is probably the largest, so you can replace it with a new one.

I'm a new machine.

1. If the power light goes out and the ink lamp and the paper shortage lamp flash at the same time when the printer is turned on, the print head may not be able to return to its position because there are foreign objects inside the printer. 2. If it is a new product, please make sure that the blue tape inside and outside the product has been removed, turn off the power of the printer, open the printer cover, and take out the bright printing paper or other obstructions from the paper feeding channel. 3. Check whether the cartridge hatch cover is tightly covered

Open the cartridge hatch cover, push the cartridge downward until it locks into place (with a click), and close the cartridge hatch cover until it clicks. 4. Turn on the printer again and check whether the indicator status is back to normal.

Hello. What is the reason for the printer light flashing and flashing. Hello.

1. If the power light goes out and the ink lamp and the paper shortage lamp flash at the same time, the print head may not be able to return to its position because there are foreign objects inside the printer. 2. If it is a newly purchased product, please make sure that all the blue tape on the inside and outside of the product has been removed, turn off the power of the printer, open the printer cover, and take out the printing paper or other obstructions from the paper channel. 3. Check whether the cartridge hatch cover is tightly covered

Open the cartridge hatch cover, push the cartridge down until it locks into place (with a click), and close the cartridge hatch cover until it clicks. 4. Turn the printer back on and check whether the indicator status is back to normal.

A flashing printer light usually indicates that the printer is working on a task or that there is a fault. The specific reasons may be as follows:1

Printer is printing: During printing, some printers flash lights to indicate issues such as printing progress or paper exhaustion. 2.

Paper clogged or used up: When there is not enough paper or the paper is stuck during the printing process, the printer will flash the light to remind the user that the paper needs to be added or cleaned in time. 3.

Faulty: If none of the above is the cause of the flickering lights, there may be other hardware failures in the aftermath, such as damaged sensors, unstable power supply, etc. Therefore, when encountering such a situation, users are advised to check if the above-mentioned factors are present or not and take corresponding measures according to the specific situation.

If the problem cannot be solved, it is recommended to contact the relevant technician for repair.

The reasons why the HP printer light keeps flashing and not printing may be due to the following reasons: 1. The ink cartridge is faulty and needs to be replaced. 2. The cartridge trolley may be stuck, try to reinstall it.

3. The printer is jammed, take out the paper and try again. 4. The printer is out of paper, just add paper. 1. Check the ink cartridge.

Open the printer top cover, and if the cartridge trolley is able to move from the side to the center, remove one of the cartridges, and then close the top cover to inspect. If the printer's power indicator is solid back, the removed cartridge is faulty and can be replaced. 2. Check whether the cartridge is stuck.

If the cartridge trolley is stuck on the left side of the printer, unplug the power cord and move the cartridge trolley to the middle of the pen holder. Push the trolley to the far left end of the printer and turn on the power. If the printer's power light is no longer flashing, troubleshoot.

3. Check whether the printer is jammed. If the paper is jammed, you can open the back cover of the printer, see the paper and slowly take it out; 4. Check whether the printer is short of paper.

Press the power button of the printer to confirm whether the printer is flashing because of a lack of paper, and if so, add paper.