Is there any way to fix the black screen on HP laptop?

1.Sometimes it may be that the laptop has a black screen caused by some software installed, you can press F8 a few more times before restarting the machine.

2.A problem with your computer display may cause your computer screen to go black, so check if there is a problem with the display connection.

3.When there is a problem with the graphics card of the notebook, it will also cause the computer display screen to go black, and if there is a problem with the signal transmission of the graphics card, the screen of the computer will not be fully lit, so this problem should be carefully checked.

4.Computer driver or software errors can also cause the computer to screen black, in such a situation, you can troubleshoot the software or reinstall the computer system.

ThreeMethod:1. BIOS settingsInappropriate(Restore the BIOS.)Factory settings

2. System filessabotageRevertsystem orReloadsystem);

WrongOperation (EnterSafe mode(Power on.)Keep pressing F8>Select".The last time it was configured correctlyThat's it

The black screen at boot may be caused by two problems: the power supply and the cable of the pen display, so you need to check whether these two parts can be used normally?

Then directly change the system, replace a new system can be, install a new type in it, this is the best solution, and it is more stable.

Is there any way to fix the black screen of HP laptop boot? If it's a system failure, you can do it by reinstalling the system, and if it's a hardware problem, you can only fix it.

You can call the after-sales service directly and ask professional maintenance personnel to help you solve it.

You can go to a computer repair shop to reinstall the software or upgrade the software configuration.

This is normal, if the screen is often black, it means that the power supply is insufficient, and it is recommended that you can replace a power supply.

Why does your screen appear black?,The reason for the black screen is not this power supply or the system?,If the system causes it?,Only reinstall the system to try it.。

Under normal circumstances, this sound water blue can only be solved by forced shutdown.

There are many ways to fix the black screen of your laptop, such as sending it to a repair person for inspection.

This may be a problem with its display, you can repair it, or check the problem.

Is there any way to fix the black screen on HP laptop? The black screen at boot is faulty.

Take HP battle x15, win10 system as an example, the specific operation steps are as follows:

1. First, press and hold the power off button for 3-5s, then turn it back on, and quickly press the shortcut key.

f11 enters the system reset.

2. When the troubleshooting interface appears on the computer page, click to select the Reset this computer option.

3. Then select "Delete Everything" on the jump page to enter the reset of the system.

4. After waiting for 40 minutes, the computer can restart by itself and enter the main interface.

In addition to that, you can also have a black screen on your computer.

, quickly press the "Ctrl+Del+Alt" key combination, and then click on "Task Manager" in the window that opens.

and click on the menu option of "File Run New Task", enter "regedit" in the task window, then click on the registry key of WinLogo in the pop-up window, and then click on the registry key of the shell in the window on the right. The tamping machine opens the window of the key value and modifies the numerical data to.

Then click the OK button.

This answer applies to most models of HP PCs.

1. Check whether all the plugs of the power supply and the wires on the adapter of the notebook are firmly inserted into their respective sockets, if not, it means that the contact with the power supply is poor, just press the plug down again.

2. If the indicator light is not yet on, on the premise of ruling out the power adapter, it must be that there is a problem with the power chip of the motherboard or a short-circuit breakpoint, and the motherboard is not powered on.

3. If the indicator light responds but the screen is black, it may be a problem with the graphics card or memory.

4. There is no display when the boot is normal, check whether the power cable, switch, and data cable of the display are correct, and it is also possible that the display is damaged.

The steps to solve the black screen on HP laptop boot are as follows:

Press and hold the power off button for a few seconds to force the power off, and after power on, press the shortcut key F11 to enter the system reset.

After powering on, pressing F11 will appear for troubleshooting, click to select Reset this computer.

Go in and select an option, select Erase Everything, and go to System Reset.

Wait for about 1 hour for the HP laptop to turn on successfully.

Under normal circumstances, the black screen after the computer is turned on depends on which situation, is there a cursor in the upper left corner? Flashing and flashing,If this is the case,Most likely there is a problem with the system,You can first try to use the PE system of the U disk to enter,See if you can enter,If you can enter the PE system of the U disk,Try to restore the system again,See if you can enter? If it still doesn't work, it may be that there is something wrong with your hardware, and you have to go to the computer to check which piece is broken and change an accessory.

1. There are probably the following types of black screens:

1) The power supply is unstable.

2) The memory module may be loose.

3) There is a problem with the data cable connected to the motherboard of the monitor.

This may be a failure of the system, you can reinstall the system first, if it can't be solved, you can only go to the after-sales service to detect the failure of the hardware.

1. First recall whether you have adjusted the refresh rate or display resolution, you can press [F8] several times when you boot up, and select [Safe Mode] in the system's [Boot Menu];

2. After selecting the security mode, you can generally enter the system normally, first click the right-click menu on the desktop, select [Screen Resolution], you can see [Resolution] after entering, and select the resolution of [Recommended] in the drop-down menu; Click [Application] and [OK] below to restart to enter the system;

3. If you can't enter the safe mode, it may be due to hardware problems, you can take the notebook apart, take out the memory module and clean up the gold finger;

1. Try brightening the brightness of your computer screen. 2. Press the F2 button when you boot up to enter the BIOS interface to check whether it is displayed normally. 3. Connect an external monitor and press the key combination to switch the display.

4. Remove all external devices, take out the installed memory or other hardware, and then turn on the device for confirmation. If the above methods still cannot be solved, it is recommended to go to the after-sales service center for testing.

Hope it helps.

1. The reason why the laptop boots up with a black screen.

There are many reasons for a laptop black screen, and the common reasons for a black screen are:

Shenzhen notebook repair center 400-669-99651, poor contact of display data cable;

2. Poor contact of the graphics card or;

3. Poor CPU contact and overheating;

4. Poor contact of memory modules;

5. Poor power supply performance;

6. The machine is infected with a virus, and the BIOS is destructively refreshed;

2. How to fix the black screen of the laptop.

1. The boot display screen is black, only the indicator light is on, and the host does not have any reaction. I can't feel the fan spinning behind my hand behind the main unit. None of the voltages are measured. Remove it and find that the power adjustment tube is broken, and replace it with normal.

2. The power supply and CPU fan are normal, but the screen has no reflection, and there is no self-test sound. This machine adopts SLOT1 structure, and the CPU is easy to contact poorly, so it is sent to the after-sales service for inspection and maintenance.

3. Do not self-check when you turn on the machine, and check that the power supply is normal. Using the minimal system method, the machine can start normally when the optical drive is unplugged. Then install the fault recurrence. It means that there is a problem with the optical drive, and the machine cannot be started. It should be sent to the after-sales service immediately for disposal.

Summary. If there are other letters displayed on boot, you don't need to change to a solid state, just reinstall the system directly.

Why does HP laptop screen go black after booting up? How to solve it?

Hello, I am Xiao Ai, an electronic consultant, and I am happy to answer for you Please later, I am working hard to sort out the answer for you, and I will reply to you soon

The black screen of the power on is black.

This is a regular system crash, and you can try to replace it with a solid state. May you have a light when it's dark, an umbrella when it's raining, someone to accompany you on the road, and if there are no other problems, I wish you a happy life.

If there are other letters displayed on boot, you don't need to change to a solid state, just reinstall the system directly.

I can't see anything.

Broken master? This is a solid-state problem, and the motherboard is also possible, and you need to check the hardware.

If this is the case, you can only check the line, and there is no other way.

1. First recall whether you have adjusted the refresh rate or display resolution, you can press [F8] a few more times when you boot up, and select [Safe Mode] in the system's [Startup Menu Quietly Simple];

2. After selecting the security mode, you can generally enter the system normally, first click the right-click menu on the desktop, select [Screen Resolution], and then you can see [Resolution], and select the resolution of [Recommended] in the drop-down menu; Click [Application] and [OK] below to restart to enter the system;

3. If you can't enter the safe mode, but it can be due to hardware problems, you can disassemble the notebook, take out the memory module and clean up the gold finger;