Why every night 7. My broadband dropped around 8 o clock?

If the broadband connection is frequently dropped, the solution is as follows:

1. If you use a router, disconnect the router for stand-alone dial-up test;

2. If you have a modem device, please pay attention to whether the device is overheated, and it is recommended to turn it off for a few minutes before restarting it.

3. If the connection is dropped when running the program alone (such as when playing games), it is recommended to restart the computer or reinstall the program;

4. Check whether the disconnection is caused by computer virus, and it is recommended to scan the whole disk;

5. If there is a server option for the running program, please select China Unicom.

If the above methods still cannot solve the problem of disconnection, you can contact the local manual customer service for feedback.

How does telecom broadband get old and drop during the day By 6 or 7 o'clock in the evening, it basically doesn't drop out.

1.Check if all your lines are smooth2Restart all devices3

Restore the computer system or reinstall it4Log in to the official website of China Telecom to take the speed test, and it is recommended that you close all applications to ensure the accuracy of the speed test. 5.

If the speed measurement is not normal, it is recommended to call 10000 and ask the staff to come to your door for testing and debugging.

I've had a similar issue before.

When I called the broadband operator, I learned that it was a network failure. In another county in our city, the heavy rain crushed the equipment and needed to be repaired! It took almost a week to get it done!

But listening to your description, it doesn't seem to be the case, as for the repair personnel you said, they are nothing more than installing broadband, and they understand too little!

First of all, after you disconnect from the network, is the local connection normal?

If the local connection is normal, log out of your broadband account password to log in again. If you can log in successfully, but you can't access the Internet, it can be determined that it is a broadband network problem. If you fail to log in again after disconnection, you can restart the computer once, if you still fail to log in, it must be that the broadband operator's server is faulty.

If the local connection is not normal, you have to check the network cable, this is easier to solve!

The above is a personal experience, I hope it can help you!

Mine is the same, someone who understands it, okay? It's been a few days since the day before yesterday, and the day before yesterday was ** no signal to call the telecommunications people to finish it and start to drop the line at night.

I'm the same problem, and no one knows what to do.

ADSL Internet access is to load broadband signals on ordinary ** lines, as if the voltage of the broadband signal is a few volts higher than the voltage of **, because you have 300 meters to the junction box, it is even farther to the telecommunications room. I think maybe there are few people who use it during the day, and I can make do with it. If you surf the Internet at night, other people's voltages are normal, but your signal is the weakest, and it is easy to be interfered with, so the equipment in the computer room may not be recognized, and you can't go up.

If this matter cannot be solved at first, it will be difficult to solve it in the future. Apply for a refund for another company, or share it with a good signal, and share the cost. Or use a wireless one.

It's so long, what is the error ** when you can't go online? 678 for repair, 691 directly call 10000 to get it.

Is there an error similar to 678 691 when you can't get up in the early morning** I'm the No. 10000 operator in Anhui, if you don't understand, you can ask me If I can help you, I will help.

The pull cord is too long. Generally, the signal will weaken after 50 meters, let alone your 300 meters. When there are many people surfing the Internet at night, the signal will be weaker. It's better to buy a signal repeater.

This could be a problem with the network... You drop the line, you call 10000 to bind it. Yes or no.