-
Anonymous users2024-02-07How to set up a wireless router.
-
Anonymous users2024-02-06How to set up a wireless router on an all-in-one machine:
Assuming the IP address of the router is, refer to the label or instruction manual on the router box.
1. One end of the network cable is connected to the LAN port of the router, and the other end is connected to the network port of the computer.
2. Open the browser, enter the IP address of the router), enter the router account and password (see the label or manual on the router box).
3. Point setting wizard.
Internet access: PPPoE
Internet ID and Internet Password: Enter the broadband account and password.
Click Next.
4. Wireless status: on.
SSID: Enter the name of the wireless device.
Channel: Select 9 (if connected to an Apple mobile device or Mac: select 11 or 13).
PSK Password: Enter the wireless password.
Other defaults are sufficient.
5. After the setting is completed, one end of the network cable is connected to the LAN port of the modem, and the other end is connected to the WAN port of the wireless router.
-
Anonymous users2024-02-05Connect the router to the power supply, connect the desktop and the router with a network cable (the reason is that the plug end is the LAN port, different routes have different IP addresses, most of them are or, and there are some other IPs, see the instructions on the route), you can set it up when you enter the route!
-
Anonymous users2024-02-04Connect the router to the power supply, connect the computer and the router with a network cable (the router side is a plug LAN port,), open the computer, click on the IE browser, enter in the address bar: or, there is a description on the back of the general router), enter the user name and password, the manual is available, and you can refer to the manual to set up according to the setup wizard when you enter the route! Simple, I hope you can!
-
Anonymous users2024-02-03It's the same, dear, if you don't understand, you can ask me.
-
Anonymous users2024-02-02The all-in-one machine also needs a wireless network card to connect to wifi.
-
Anonymous users2024-02-011. The bus of the broadband network is connected to the WAN port of the router, and the LAN port of the router is connected to the computer.
2. After starting the device, open the browser and enter the wireless router setting interface in the address bar. (If you can't get in, please look at the nameplate at the bottom of the router or the router instruction manual, the default settings of different models of routers are different.) ）
3. An account and password to log in to the router appear in the settings interface, enter the default account and password admin, and you can also refer to the manual;
4. After successful login, select the interface of the setup wizard, which will automatically pop up by default;
5. After selecting the setup wizard, a window will pop up to explain that you can set the basic parameters of the router through the wizard, and click Next directly;
6. Set up step by step according to the setup wizard, select the Internet mode, usually ADSL users choose the first PPPoE, if you use other network service providers, select the following two according to the actual situation, if you don't know how to choose, directly select the first item to automatically select, convenient for novice operations, click next after selection;
7. Enter the password applied for from the network service provider, and go directly to the next step after the input is completed;
8. Set the wifi password, try to make the alphanumeric combination more complicated, and it is not easy to be rubbed off the network.
9. After entering correctly, it will prompt whether to restart the router, select Yes to confirm the restart of the router, and you can access the Internet normally after restarting the router.
There's definitely something wrong with your setup. The router is automatically dialed up, and each machine that shares the Internet does not affect each other. Dialing software is not possible. >>>More
Now you can live without a computer at home, but you can't live without wifi. Because mobile phones must use wireless Internet access. But if you don't have a computer and need to set up a router, how do you set up a router on your phone? Today, we're going to talk about how to set up routing with your phone. >>>More
First use the computer to connect the router separately, after entering the negative setting, modify the address in the LAN port settings, save and restart, and then insert the cat's network cable into the WAN port of the router, and then use it to enter your own router to set up. If it is a wireless modem, then find the root network cable, connect it to your wireless router alone, and then enter to modify the LAN port IP. In fact, it is to modify your router IP to avoid conflicts with optical modems. >>>More
Here's how to set up your router:
1. Line connection: >>>More
The installation and setup of the router is as follows:
1.First connect the line, you can refer to the figure below. >>>More