How to reset your home wireless router

The installation and setup of the router is as follows:

1.First connect the line, you can refer to the figure below.

2.After the line is connected, open a browser, enter the management address and management password of the router, and then enter the router background (the login address and login password of the specific router can refer to the manual or the label on the back of the router).

3.Once you've logged in to your back-office, select Quick Settings, then click Next.

4.Choose the way to access the Internet, usually ADSL users choose the first PPPoE, if you use other network service providers, then choose the following two according to the actual situation, if you don't know how to choose, directly select the first item to automatically select, convenient for novice operations, click next after selection;

5.Enter the password applied for from the network service provider, and go directly to the next step after entering.

6.Set the wifi password, try to make the alphanumeric combination more complicated, and it is not easy to be rubbed off the network.

7.After entering it correctly, it will prompt whether to restart the router, select Yes to confirm the restart of the router, and you can access the Internet normally after restarting the router.

Factory reset your wireless router and set it up again. Wireless routers need to be set up according to the Internet environment before they can be used. Different Internet environments have different ways to set up wireless routers.

If it is a fiber optic cat that needs to be dialed up to connect to a wireless router, set it up according to the following methods: 1. Plug in the wireless router, do not connect the cat first, and connect the computer to any LAN port of the wireless router; 2. Enter the IP address of the router in the address bar of the browser (on the label behind the router), and enter the login username and password to enter the settings page; 3. Set up according to PPPoE (ADSL virtual dialing), enter the Internet access and password, and set up automatic connection; 4. Set the SSID, encryption method and password; 5. Save and restart; 6. After setting, connect the network cable from the cat LAN port to the WAN port of the wireless router.

Re-set the parameters of the router to use the network normally, and the steps to set up the router are as follows:

2. Then open the browser and enter the management address and login password of the router.

3. After logging in to the background, click the setup wizard, and then fill in the corresponding parameters according to the wizard instructions.

<>6. After the wireless setting is completed, click Save, and then restart the router to use it normally.

Summary. How to reset the wireless router Hello dear. The steps to reset your router are as follows:

1. First, press and hold the reset button on the back of the router until the router resets its factory settings, and then restart the router.

2. After checking that it is correct, open the browser and enter: press Enter to enter, at this time a dialog box pops up, you need to enter the account name and password, there will be in the back of the router, in general: account name:

admin password: admin.

3. After entering the password behind the router, you can log in to the settings page of the router.

4. Click on the setup wizard on the page and follow its requirements step by step.

5. Click Next to enter the password setting, this password is the password of the current network network, if you don't know, you can consult the network operator.

6. After setting the password for surfing the Internet, the function of wireless Internet access is set, set the wifi name and wifi password, it is recommended that the password is not too simple, it is easy to be cracked, and the encryption method can be recommended by the system.

7. Click Done, restart the router, and the settings have been successful.

I hope the above is helpful to you If you are satisfied with me, please give me a thumbs up

How to reset the wireless router.

Hello dear! I have seen your question here, and I am trying to sort out the answers of several friends, and I will give you a reply in five minutes, please wait a moment! ^

How to reset the wireless group hidden hand router Hello dear. The steps to reset the router are as follows: 1. First, press and hold the reset button on the back of the router until the router restores factory settings, and then restart the router.

2. After checking that it is correct, open the browser and enter: press Enter to enter, at this time a dialog box pops up, you need to enter the account name and password, there will be in the back of the router, in general: account name:

admin password: After entering the password of the account behind the router, you can log in to the settings page of the router. 4. Click on the setting wizard on the page and follow its requirements step by step.

5. Click Next to enter the password setting, this password is the password of the current network network, if you don't know, you can consult the network operator. 6. After setting the password for Internet access, the function of wireless Internet access is set, set the wifi name and wifi password, it is recommended that the password should not be set too simple, it is easy to be broken and solved, and the encryption method can be recommended by the system. 7. Click Done, restart the router, and the settings have been successful.

I hope the above is helpful to you If you are satisfied with me, please give me a thumbs up

1. Open any browser on the computer, enter the IP address of the router in the address bar, the IP address is generally on the back of the router, and then press the enter key.

2. In the interface of the login router that pops up, enter the password, and then click OK to log in.

3. After successfully logging in to the router, click "Network" in the left column of the state smile.

4. In the pop-up interface, select the 4G wireless basic settings, set the relevant parameters on the right, such as the name of the wireless network and the wireless password, and then click "OK".

1. Connect to the computer with a network cable, open the web browser hall, enter the router login address in the address bar, and enter the user name and password in the pop-up login box;

2. Set up a dial-up account, after logging in, click on the network parameters and WAN port settings on the left;

3. Select PPPoE in the WAN port connection type, and enter the correct liquid notification and password;

4. After completion, click Save at the bottom, save about 10 clocks, and then click Connect;

5. Set up wireless, select the basic settings under the wireless settings on the left, set the wireless name in the SSID number on the right, and click the save button to save the settings after the settings are completed; Dress up.

6. Select the wireless security settings on the left, select WPA-PSK WPA2-PSK, and enter the wireless password.

7. After the setting is completed, click the save button, and after changing the password wirelessly, the computer needs to enter a new password to reconnect.

The simple way to boost the signal of the wifi partition wall is as follows:

1. Relocate the router or gateway device: The range of a typical WiFi network usually does not cover the entire house. The distance of the router and the physical obstacles between the device and the router can clearly affect the signal strength, and the placement of the wifi broadband router or other network gateway device directly affects its signal range.

2. Change the Wi-Fi channel number and frequency: Wireless interference can also be caused by adjacent WiFi networks using the same WiFi radio channel, and changing the WiFi channel number on the device can eliminate this interference and improve the overall signal strength. All routers have frequency bands, but if you have a dual-band router, one that has both and 5GHz bands, you may experience less interference on the limb 5GHz band.