How to set up a WiFi hotspot after connecting to the campus network

A laptop with internet access.

One. To put it simply, it is a campus network that has been connected.

The steps are as follows:1Run the cmd command. Win+R and then enter cmd to enter the DOS environment. Genuine win7 needs administrator privileges to open and run.

2.Enter the DOS

3.Type netsh wlan set hostednetwork mode=allow ssid=mywifi key=123456789

where mode=allow is allowed.

SSID refers to the name of the wifi you set, here you can use mywifi to set it yourself.

key password is an alphanumeric greater than eight digits.

4.At this point, the system has virtualized a wifi hotspot.

5.Then open your Network & Sharing Center.

Locate Change Adapter.

Set up. 6.Then you will find a new one.

7.Find the adapter that connects your computer to the Internet.

Local connection right-click property.

8.Check Allow other network users to access this wireless network.

Select the new Wi-Fi connection 2 in the box below

9.The last thing is to turn on this wifi hotspot:

...... you typed Netsh Wi-Fi just now

Then enter netsh wlan start hostednetwork and press enter.

10.At this time, the bearer network has been started, even if a WiFi hotspot has been successfully set up.

Open [Computer Desktop] and find [360 Wireless WiFi] to enter the main interface.

Wait for the client to enter, and double-click the program icon to view the connection information.

Click the [Name] and [Password] settings below, and restart it and reconnect it with your phone.

Click [Mobile Phone Connection] at the bottom right to manage the mobile phone, and you can choose to join the [Blacklist] to restrict.

Next, click the [Settings] menu in the upper right corner and select [Advanced Settings].

Tick the [Turn on Campus Mode] menu, and click [OK] to restart after setting.

If you want to open a hotspot, you must use a laptop to open a hotspot. However, the general campus network has a separate wifi, and there is no need to open a separate hotspot. When opening a hotspot, directly set a hotspot password, so that the person who knows the password can connect.

The broadband of the campus network connected to the computer, if you open the wifi hotspot, you can directly find the hotspot in the computer, open the hotspot, or you can use other hardware facilities to open the wifi hotspot.

If your computer is connected to the campus network broadband and opens a hotspot for wifi, it is easy to be blocked, so it is recommended that you do not do this.

Dear, the computer is connected to the campus network, and after the normal networking, install a portable wifi on the computer, which can be used as a wifi signal transmitter.

If you want to use your own hotspot network connection to a computer at school, you'll need the following:

1.The phone needs to have the hotspot function turned on and be connected to the Internet;

2.The school allows Chun Zuochong to use the mobile network to access the Internet, which is not restricted by the local area network;

3.The school computers are equipped with Wi-Fi access to connect to Wi-Fi.

If you meet the above conditions, you can follow the steps below to connect:

1.Turn on the hotspot function in your phone, set the SSID name and password, and allow the school computer to connect;

3.Find the name of the Wi-Fi hotspot created by your phone and tap "Connect".

4.Enter your password, and once connected, your school computer will be able to connect to the internet through your hotspot network.

It's important to note that when using a hotspot connection, it may be affected by aspects such as mobile network speed and signal, and it will consume your mobile data. It is recommended that you pay attention to saving data when using hotspots and try to choose a normal Wi-Fi connection method.

If your computer can't find the wifi network, you can connect your hotspot by following these steps:

1.Turn on the hotspot feature on your mobile device or phone. This feature can usually be found in Settings or Personal Hotspot.

2.Open the wifi settings on your computer and look for available networks. You should be able to find your hotspot name (SSID).

3.Select your hotspot and rush to enter your password.

4.If set up correctly, your computer will automatically connect to your hotspot. If the connection is unsuccessful, check whether the password and network name are correct.

Please note: Using Personal Hotspot consumes data from your mobile device or phone. It is recommended to use it in situations where there is no wifi connection, or when a large amount of data transfer is not required.

How to connect the mobile phone when it wants to connect to the campus network wifi, and how to connect it needs to be authenticated when connecting. The following describes the steps of how to connect your mobile phone to the campus network wifi.

1. First, open the mobile phone [Settings] and click [WLAN].

2. Then click the icon on the right side of [WLAN] to turn on WiFi.

3. Then click on the wifi on the campus network.

4. Enter the password you want to connect to the campus network.

5. Finally, click [Connect Login] to connect to the campus network WiFi.

Step 1: Open the hotspot directly is definitely not possible, because the computer is a tendon, in addition to ether, wifi, network access other than mobile phone network data, he thinks that he is not connected to the network, so we have to take the mobile phone to open a hotspot for it according to the characteristics of win10 (attention!). The hotspot of the mobile phone should be in the state of turning on the data connection, so that win10 thinks that the wireless network is networked, so that the hotspot can be turned on in the next part).

Step 2: Turn on the wireless hotspot function with a mobile phone or other device, and the hotspot should be in a network state and be able to access the Internet normally.

Step 3: Connect the computer to the hotspot that you just turned on with your phone, and then we go to the settings to turn on the mobile hotspot.

As you can see, at this point, we can successfully turn on the built-in hotspot function.

Step 4 Enter the network connection management interface on the computer, find the broadband dial-up connection, right-click the attributes, click Share, and share the network to the hotspot you just established (as shown in the figure Local Connection*10), note that at this time, you must determine whether the broadband dial-up is already in the connection state, otherwise the hotspot is turned on, and there will be no network!

Succeed with flying colors! Now you can turn off the mobile phone hotspot and connect to the broadband network shared by your own computer with wifi.